OSHA Expert Witnesses
The SEAK Expert Witness Directory contains a comprehensive list of osha expert witnesses who testify, consult and provide litigation support on osha and related issues. Osha expert witnesses and consultants on this page may form expert opinions, draft expert witness reports, and provide expert witness testimony at deposition and trial. The issues and subjects these osha expert witnesses testify regarding may include: OSHA, Fall Protection, Construction, Construction Safety, Safety, Machine Guarding, Slip Trip & Fall, Confined Space, Premises Liability, Accident Investigation, Excavation, Forklifts, Human Factors, Lockout/Tagout, and Construction Accidents.
View Full Profile
Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM
Physician and Certified Industrial Hygienist
Center for Occupational and Environmental Health
Occupational Medicine, Industrial Hygiene
-
Toxicology, Mold, Indoor Air, OSHA, metals, chromium, lead, mercury, ethylene oxide, ethylene dibromide, chemical exposure, CIH, Workers Compensation, Firefighter, arsenic, Police Officer, Deputy Sheriff, Disability Evaluation, toxic tort, CDL
I bring the medical background of being both a board certified occupational medicine physician as well as being a Certified Industrial Hygienist to your issue. I have experience in large chemical exposure (toxic tort) cases involving multiple claimants as well as indoor air quality litigation. I have evaluated indoor air quality issues from the perspectives of both an occupational medicine physician regarding symptoms and medical testing, as well as a Certified Industrial Hygienist regarding air quality sampling of occupied structures.
My attributes include the following: Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified Physician in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM) and the International Academy of Independent Medical Examiners (FIAIME). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP)....
View Full Profile
Michael P. Lawler, MS, CSP, ASP, CHST
Construction Safety, Liability Analysis, Multi ER
Safewit, Inc.
OSHA, Construction
-
Struck by Equipment, back over, Fall Protection, Multi-Emplyer, Fall Prevention, slip trip & fall, aerial lift, crush, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift
Over 30 years as a safety executive and OSHA compliance manager, trainer, advisor, and leader on major construction projects throughout the USA. Expert at applying OSH Act of 1970 standards, regulations, policies, and Letter of Interpretation. Experience includes over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations. Expert at incident investigation, accident reconstruction, and injury management and investigation. Extensive experience and expertise in MUTCD Traffic Controls and rules.
AREAS OF EXPERTISES INCLUDES:
• Liability Assessment & Contractor Duty of Care
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Crane Safety, Critical Pick Planning, & Rigging
• Disaster & Emergency Management
• Dive/Underwater Operations
• EM-385 U.S. Army Corps of Engineers
• Excavation, Trenching, & Soil Mechanics
• Slip, Trip, Falls, Stirs & Floor Safety Certi...
View Full Profile
Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC
OSHA/Workplace & Const. Safety Liability Expert
Raising the Standard Consulting (USA) Inc.
Safety, OSHA
-
Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer
Stanford R. Brown, B.Sc., CSP, CIT, CSHP, CRSP, CHSC, has over 35 years of experience managing safety and health for various projects.
He has been involved with multiple construction safety/OSHA cases as an expert witness.
A sampling of the expert witness cases he has been involved with include:
• Workplace injury at refinery construction project.
• Worker fatally electrocuted during a paving incident.
• Construction training and safety standards for power tool injury.
Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii.
Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavat...
View Full Profile
Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM
Physician and Certified Industrial Hygienist
Center for Occupational and Environmental Health
Alabama
Occupational Medicine, Industrial Hygiene
-
Toxicology, Mold, Indoor Air, OSHA, metals, chromium, lead, mercury, ethylene oxide, ethylene dibromide, chemical exposure, CIH, Workers Compensation, Firefighter, arsenic, Police Officer, Deputy Sheriff, Disability Evaluation, toxic tort, CDL
I bring the medical background of being both a board certified occupational medicine physician as well as being a Certified Industrial Hygienist to your issue. I have experience in large chemical exposure (toxic tort) cases involving multiple claimants as well as indoor air quality litigation. I have evaluated indoor air quality issues from the perspectives of both an occupational medicine physician regarding symptoms and medical testing, as well as a Certified Industrial Hygienist regarding air quality sampling of occupied structures.
My attributes include the following: Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified Physician in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM) and the International Academy of Independent Medical Examiners (FIAIME). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP)....
View Full Profile
Nathan Boswell, CSP, CRSP, CMIOSH
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Colorado & Nationwide)
Alabama
OSHA, Safety
-
FMCSA/DOT, MSHA, Industrial Accidents, Confined Space, Slips / Trips, Lockout/Tagout, Premises Liability Expert, Trenching & Excavation, Scaffolding, Cranes & Rigging, Forklifts, Workplace Safety, Amputations, Construction Safety, Fall Protection, Ladder Safety, OSHA Citations, Construction Accidents, Machine Guarding, Electrocutions
Overview:
Safety and health executive and consultant with over 15 years of progressive experience, including hands-on field work, executive leadership, consulting, and expert witness engagements. Holds board-certified and chartered professional designations in the U.S. (CSP), Canada (CRSP), and U.K. (CMIOSH).
Certifications:
- Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
- Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
- Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
Expertise:
Recognized expertise in occupational and transportation safety compliance, including the practical application of OSHA Construction and General Industry standards (29 CFR 1926 and 1910) and FMCSA/DOT regulations (49 CFR) within multi-employer, high-risk environments. Demonstrated experience investigating significant incidents, a...
View Full Profile
Victoria Ballard, PhD, MSE, PE, CSP, CHFP
Forensic Human Factors-Multidisciplined Engineer
Forensic Human Factors, LLC
Opelika, Alabama
Human Factors, Safety
-
Slips Trips Falls, Cognitive Engineering, Education Schools Youth Organizations, Manufacturing - Guarding Exposure Training Fall Protection OSHA, Ergonomics, ADA, Premises Liability, Product Liability, Warnings and Labels, Occupational Safety, Agriculture- Poultry Horses, Walkway Auditing, Lock Out Tag Out (LOTO), OSHA
Dr. Victoria Ballard, MSE, PE, CSP, CHFP, is an industrial and systems engineering expert specializing in human factors, occupational safety, and forensic analysis. With over sixteen years of experience as a consultant and educator. As a consultant, she provides investigations, reports, and expert analysis in legal cases involving workplace safety, human performance, product design, and environmental factors. She applies her expertise to analyze how individuals interact with products, environments, and occupational systems, offering clear and data-driven insights into accident causation and prevention.
Dr. Ballard has held engineering roles in chemical manufacturing, civil engineering, construction, and industrial safety, ensuring compliance, risk mitigation, and system optimization. She has served in various roles such as Adjunct Faculty, Graduate Researcher, Graduate Teaching Assistant, and Fellow at seven universities (University of Washington, Embry-Riddle Aeronautical Universi...
View Full Profile
Dustin Hickey, CSP, CRSP, CMIOSH, CMQ/OE
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Texas & Nationwide)
Alabama
OSHA, Safety
-
Construction Safety, Industrial Safety, Confined Space, Slips/Trips, Lockout/Tagout, Machine Guarding, Trenching/Excavation, Scaffolding, Cranes & Rigging, Forklift, Workplace Safety, Aerial Lifts, Amputations, Material Handling, Electrocution, Ladder Safety, OSHA, Construction Accident, Warehouse Safety, Fall Protection
Board-certified and chartered safety & health executive and consultant, holding designations in the United States (CSP), Canada (CRSP), and the United Kingdom (CMIOSH). 20+ years of relevant work experience from field to executive leadership followed by safety consulting and safety expert witness work. Expert in OSHA 29 CFR 1910/1926 interpretation, compliance auditing, and safety management systems.
— CERTIFICATIONS —
· Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
· Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
· Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
— EXPERTISE —
· Construction Safety
· Manufacturing Safety
· Industrial Safety
· OSHA Compliance
· Workplace Safety & Health
· Premises Liability
· Confined Spaces
· Fall Protection, Elevated Work
· Lockout/Tagout (Control of Hazardo...
View Full Profile
Dorian Kenleigh, MD, MPH, FACOEM, FIAIME
Occupational and Environmental Medicine in Arizona
Desert Occupational Medicine
Phoenix, Arizona
Occupational Medicine, Independent Medical Examinations
-
Environmental Toxicology, Disability Evaluation, COVID, AMA Guides, Firefighters, Occupational Exposure, Peer Review, Infectious Disease, Permanent Imapirment, Police, Independent Medical Examinations, Veteran Examination, Musculoskeletal Injury Rehab, Impairment Rating, Utilization Review, Industrial Hygeine, Chart Review, MMI, OSHA
View Full Profile
John Storm
Fire & Emergency Medical Services Expert Witness
ANTHEM, Arizona
Fire, Emergency Medical Services
-
Fire Expert Witness, Fire Department Policy, Training Failures, Scene Safety, EMS Expert Witness, Firefighter Injury, NFPA 921, Personal Injury, Incident Command, 911 Dispatch, Standard of Care, EMS Negligence, Emergency Response, Fireground Decisions, Apparatus Operations, Fire Cause & Origin, OSHA, EMS, FLSA, Wrongful Death
John R. Storm, MPPA, CFO, retired as an Assistant Fire Chief after 30 years of service in the fire department. John has extensive experience in Fire and EMS operations and administration, including training safety, developing employment policies and practices, FLSA, conducting forensic evaluations of fire and EMS operations, conducting fire investigations, fire code implementation and enforcement, pre-hospital EMS, Fireground operations and reviews, consulting on risk and emergency management, and incident command reviews. John possesses extensive chief officer experience in addition to 25 years as a licensed paramedic. John is also Red Card-certified and was responsible for the State of Colorado's Southwest Region Fire Departments' Wildland mobilization and response. John has conducted 1000s of Fire NFIRS and EMS Patient Care Report reviews to assess the reports' QA/QI.
Mr. Storm's background spans command, training, compliance, and governance. He has commanded emergency incide...
View Full Profile
Jonathan S. Lee-Confer, PhD
Biomechanist - Univ. Arizona Professor
Verum Biomechanics
Tucson, Arizona
Biomechanics, Premises Liability
-
Slips, Trips, Falls, ADA, Biomechanics, Injury Causation, Slip-Resistance Testing (tribometers), Pedestrian Reconstruction, OSHA, ASTM, Code Compliance, Building Codes, Stairs, Walkways, Awareness, Visual Detection, Human Factors, Gait, Hazard Warnings, Walking
Dr. Lee-Confer is a biomechanical expert specializing in injury causation, human movement, and walkway safety. As Director of Biomechanics at Verum Biomechanics and Assistant Professor at the University of Arizona, he combines academic research with practical litigation support.
His expertise spans:
Slip, trip and fall biomechanics (injury biomechanics)
Floor slip resistance testing (tribometers)
Gait analysis and movement dynamics
Code compliance (ASTM, ADA, IBC)
Premises liability and safety standards
A contributing author to ASTM F2508-16e, the standard for tribometer validation, Dr. Lee-Confer’s work directly informs measurement of walkway slip resistance—a key factor in many slip-and-fall cases. He also played an instrumental role in Arizona Senate Bill SB1373, advancing fall prevention measures.
Dr. Lee-Confer holds a Ph.D. in Biomechanics from the University of Southern California, with specialized research in slip detection, motor control, cause of injury to anatomic...
View Full Profile
John W Ross
Commercial Trucking Expert
Evidence Solutions, Inc.
Tucson, Arizona
Trucking, Transportation
-
Commercial Motor Vehicle, HazMat, DOT, OSHA, Truck Accidents, FMCSR, FMCSA, OIL field, Propane, Driver Standard of Care, Loading, Unloading, Oversized loads, Electronic log compliance, Driver Hiring & Training, Hours of Service Issues, PI, Driver Qualification File, Clause 391.1, ELDs
John Ross brings over 30 years of extensive experience in the trucking industry, specializing in Safety Standards (FMCSA & CDL Licensure Requirements), Truck Driver Training and Skill Testing, Driver Standard of Care, Hours of Service Issues, HAZMAT and accidents involving Load Securement. His expertise extends to the Maintenance and Inspection of Heavy Trucks, Double/Triple Tanker Trailers, Oversized Loads, both DOT & non-DOT Fleets and more.
John has been driving commercial vehicles professionally since 1993 and boasts a flawless, violation-free record. His diverse roles include serving as an owner/operator, safety director, and compliance director. Currently, John is the Commercial Trucking Expert at Evidence Solutions, Inc. where he leverages his extensive experience to assist attorneys in their truck accident cases. He has been retained as an expert witness in numerous state and federal courts, providing valuable insights and testimony.
Background:
Double / Triple Trail...
View Full Profile
Mark Clinton, MBA, ARM
Insurance Safety - 40 years in practice - 80P/20D
Decisive MGMT
NORTH LITTLE ROCK, Arkansas
Premises Liability, Risk Management
-
Slips trips & falls, Fairs & theme parks, Roofing, Electrical, OSHA, Risk Management, Amusement / zip lines, Premises Liability, Life Safety, NFPA, ASSP, Worker's Compensation, Construction, Scaffolding, Lockout tagout, Arc flash, Retail, Excavation, Fall protection, Environmental
Mark Clinton, MBA, ARM. Workplace accidents, Premises, General Liability, Risk Management. Qualitative Risk Management (1985-date), P & C Insurance loss control (1989-date), Arkansas Insurance Department, Risk Management Division, 1985-1989. Matriculated, June 2025, Liberty University, Doctorate in Law & Policy, expected graduation date, June 2030.
In active expert practice since January 2017 with 32 retentions & 5 depositions (FEB 2025), work ratio is roughly 80/20, plaintiff to defendant. All reports are written to Federal guidelines using conclusion, basis and reason and are painstakingly researched, when needed. No work is done by others.
Zipline Safety - Association of Challenge Course Technology (member) & Professional Ropes Course Association (member), familiar with ANSI & ASTM application and changes on waiver language using Kuchta v. Opco.
OSHA authorized outreach trainer for construction & general industry since 2000. General contractor safety director, 2014-2...
View Full Profile
James Caylor, PE
Industrial refrigeration design and analysis
Caylor Engineering & Associates, PLLC
West Fork, Arkansas
Refrigeration, OSHA
-
Industrial process refrigeration, cold storage, ammonia, carbon dioxide, piping, insulation, design, design review, OSHA, EPA, mechanical code analysis
I have 15 years' experience as a refrigeration service/startup contractor, followed by 25 years' experience as a graduate engineer in industrial refrigeration ammonia and CO2 applications up to 5,000 TR. My engineering experience includes design and project management positions with a D/B contractor, a large food processor, an A&E firm (Deputy Director of the Food & Beverage Group) and my current consulting business. I'm registered as a PE in 19 states and have an NCEES Record.
Current committee service includes the American Society of Heating, Refrigerating and Air-Conditioning Engineers (TC 10.1 and TC 10.2). I have revised portions of chapter 2 in the 2014 and 2018 editions of the ASHRAE Refrigeration Handbook, calculations of CO2 piping capacities in chapter 3 of the 2018 RHB and organized the ongoing revisions to chapter 1 of the 2026 RHB. I've been a Member of ASME B31.5 since 2019 and chaired the Committee since 2021. My work with the Refrigerating Engineers and Technic...
View Full Profile
John H Hamilton, MSME PE
Mechanical/safety engineering expert
MOUNTAINBURG, Arkansas
Engineering, Mechanical Engineering
-
OSHA, equipment & machinery, occupational safety, machine guarding, plastics processing equipment, lockout-tagout (LOTO), Injection molding machines, blow molding machines, industrial accidents, thermoformers, product warning, product defect, machine design, pumping-piping systems, patents, patents
Mr. Hamilton is a highly experienced licensed mechanical engineer. He has 25+ years of teaching experience. He is an experienced expert witness who has testified at over 70 depositions and over 15 trials
Mr. Hamilton, is a full-time faculty member of the University of Arkansas. In this faculty position he is responsible for teaching undergraduate mechanical engineering courses.
Previously Mr. Hamilton worked as a full-time consulting engineer assisting professionals in both industry and the legal community by serving as a consultant and as an expert witness. As an expert, Mr. Hamilton has evaluated hundreds of consumer, industrial and agricultural incidents related to safety, machine guarding and mechanical engineering.
He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other indu...
View Full Profile
Peter Jaramillo, CIH
Delta Bay Consultants, LLC
Antioch, California
Industrial Hygiene, OSHA
-
Industrial Hygiene, Health & Safety, Occupational Health, Indoor Air Quality, Biological Hazards, Chemical Hazards, Construction Safety, Valley Fever, COVID-19, Noise, Environmental, Laboratory Safety, Emergency Preparedness, OSHA, Certified Industrial Hygienist, Workers Compensation
Peter Jaramillo, CIH has 35+ years of experience in the fields of Occupational and Environmental Health & Safety. As co-owner and Principal Industrial Hygienist of Delta Bay Consultants, LLC, Peter provides the following services: (1) air & noise monitoring; (2) indoor air quality investigations; (3) health & safety programs; (4) hazard/risk assessments; (5) ergonomics surveys; (6) assessments of work practices, engineering controls, personal protective equipment, and emergency preparedness; (7) confined space and ventilation evaluations; (8) employee training/mentoring; (9) acting as a technical resource, subject matter expert, and regulatory liaison; and (10) Expert Witness Testimony and other Litigation Support on legal claims related to occupational health & safety.
Peter has provided expert witness services for numerous cases involving exposures to Coccidioides immitis (the "Valley Fever" pathogen) in the Central Valley of California. He has also supported various cases invol...
View Full Profile
Chris Larson, CFEI
Specializing in the Electric Utility Industry
LARSON ELITE
Poway, California
Electricity, Safety
-
Electric Expert, OSHA, Construction, Electrical Contact, Shock, Electrocution, Fatality, Incident Investigation, Lineman Expert Witness, Cranes Tip and Contact, Arc Flash, Occupational Injury, Personal Injury, Burns, Excavation, Utility-Related Fire and Explosions, Rigging, Falls, Helicopter, Underground Utility Strike
Summary of Electrical Utility Construction, Safety, and Training Expertise
With over 36 years of comprehensive experience in the electric utility industry, I specialize in providing forensic analysis for accident investigations and expert witness services in electrical utility matters. My hypotheses and opinions are developed using a rigorous, scientific forensic analysis and investigation process. I hold the Certified Fire and Explosion Investigator (CFEI) credential, which is particularly beneficial in cases involving electrical utility-related fires and explosions.
My career has progressed from certified Journeyman Lineman to various upper-level corporate management positions, including Project Manager, Division Manager, District Manager, National Director of Training, and Director of Safety and Training. This breadth of experience enables me to offer informed guidance on legal matters related to personal injury, property damage, electric utility fire ignition, utility system m...
View Full Profile
Gary L. Buffington, MS, AA, BS, CSP, CRSP
American Safety Consulting
Santa Clarita, California
OSHA, Construction
-
Accident Reconstruction, Personal Injury/Wrongful Death, Crane/Hoist & Rigging, Safety Training Plans, JHA/JSA, Confined Space, Fall Protection, Machinery Guarding, Ladders/Scaffolds, Forklifts/Scissor Lifts, Safety Codes/Regulatory Compliance, Audits, Mining, MSHA, HAZCOM, EM 385-1-1, ANSI
Mr. Buffington offers a unique combination of formal education, special training and project based technical experience in completing mega-projects valued at 20 billion dollars with over 12 million worker hours and safety statistics below half of the respective national averages and no fatalities. He is a CSP (US) & CRSP (Canada) by exam, licensed Private Investigator, former Federal Supervisory Special Investigator and MSHA federal Mine Inspector, Deputy Sheriff, Deputy Sheriff Criminal Investigator, approved OSHA 29 CFR Trainer Parts 1910 & 1926, approved MSHA 30 CFR trainer for surface & Underground coal and metal/non-metal mines. ASSE 2001 Safety Profession of the Year for Construction Practice Specialty & ASSE 2003 -2004 Safety Professional of the Year for Mining Practice Specialty.
View Full Profile
Dr. Eric N Brown, CIH, CSP
Industrial Hygiene and Mold Expert
Indoor Environments
Los Angeles , California
Mold, Industrial Hygiene
-
Asbestos, Bad Faith, Construction Safety, Environmental, Ergonomics, Hazardous Materials, Human Factors Engineering, Industrial Hygiene & Mold, Landlord / Tenant, Lead Poisoning, Occupational / Environmental Health, OSHA, Safety, Wrongful Death, Thermal Comfort, Heat Stress
NO-COST CASE FILE REVIEW AND PRELIMINARY OPINIONS!
Dr. Eric N. Brown, CIH, CSP, is a Certified Industrial Hygienist (CIH) and a Certified Safety Professional (CSP), with both certifications in good standing with the issuing boards. Dr. Brown holds a Doctorate in Public Health with an Industrial Hygiene specialization from the University of California at Los Angeles, and a Master’s degree in Public Health with an Occupational Health specialization from the Medical College of Ohio. He has over 25 years of experience in:
Health and Safety
Industrial Hygiene
Indoor Air Quality Exposure Assessments
Heat Stress and Thermal Comfort
Litigation Support
Dr. Brown has been a designated expert in thousands of cases, been deposed over one hundred times, and has testified in both trials and arbitrations. His services are available to attorneys representing both plaintiff and defendant.
View Full Profile
Dustin Hickey, CSP, CRSP, CMIOSH, CMQ/OE
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Texas & Nationwide)
California
OSHA, Safety
-
Construction Safety, Industrial Safety, Confined Space, Slips/Trips, Lockout/Tagout, Machine Guarding, Trenching/Excavation, Scaffolding, Cranes & Rigging, Forklift, Workplace Safety, Aerial Lifts, Amputations, Material Handling, Electrocution, Ladder Safety, OSHA, Construction Accident, Warehouse Safety, Fall Protection
Board-certified and chartered safety & health executive and consultant, holding designations in the United States (CSP), Canada (CRSP), and the United Kingdom (CMIOSH). 20+ years of relevant work experience from field to executive leadership followed by safety consulting and safety expert witness work. Expert in OSHA 29 CFR 1910/1926 interpretation, compliance auditing, and safety management systems.
— CERTIFICATIONS —
· Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
· Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
· Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
— EXPERTISE —
· Construction Safety
· Manufacturing Safety
· Industrial Safety
· OSHA Compliance
· Workplace Safety & Health
· Premises Liability
· Confined Spaces
· Fall Protection, Elevated Work
· Lockout/Tagout (Control of Hazardo...
View Full Profile
MARTIN M BALABAN, PhD, PE
AR TECH
Encino, California
Accident Reconstruction, Safety
-
Vehicle collisions, Premises liability, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer in CA, Slip & Fall, Slip and Fall, Trip & Fall, Ladders, Trip and Fall
Vehicular:
all vehicle types, multi-vehicle, bicycles, pedestrians, skidmark analysis. damage-matching, occupant biomechanics. visibility & line-of-sight analysis, traffic signal phasing, vehicular component defects, seatbelts.
Premises Liability: Code Compliance, Slip, trip, floor friction testing, stairway & ramp accidents, glass injuries, guardrails; illumination issues; manual & electronic gates, ladders, door closing mechanisms, falling objects, structural failures. Occupancies include single- and multi-family residences, retail stores, office buildings, garages, sidewalks, parks and other public access.
Industrial & Construction accidents: Walking-working surfaces including ramps, hoisting & conveying, powered lifts, work platforms, forklifts, construction vehicles, materials handling & storage, machine guarding, ladders, scaffolding, trenching & shoring,
Cal-OSHA compliance, lockout/tagout, IIPP analysis, human factors & ergonomics issues.
Products Liability: Liabili...
View Full Profile
Dennis A Colucci, M.A., Au.D., ABAC, FAAA
Hearing, Tinnitus, and Balance Injury
Auditory Disorders and Balance Laboratory, Inc.
Dana Point, California
Audiology, Noise
-
Hearing Loss, Tinnitus, Hyperacusis, Vertigo, Acoustic Trauma, 3M, Airbag, Head Injury, Whiplash, Malpractice, ADA, Fitness for Duty, OSHA, Noise Exposure, Hearing Aids, Product Liability, MVA, Airplane Crash, Central Auditory Processing
Dr. Colucci has extensive experience in clinical, industrial, military, and forensic audiology, serving patients of all ages, including those with multiple disabilities. He holds a B.A. from California State University, Fullerton (1972), an M.A. from Ohio University (1974), and an Au.D. from Central Michigan University (2004). He was certified by the American Speech-Language-Hearing Association and licensed in 1976, and he became board-certified by the American Board of Audiology in 1999. In 1990, he was a guest speaker at the Fellows of the Howard House Foundation. In 1997, he served as an Expert Witness for the California Audiology and Speech Pathology Licensing Board.
Part of Dr. Colucci's noise and trauma expertise comes from consulting in the petroleum, nuclear, and manufacturing industries. From 2007 to 2020, he served as the consulting audiologist for Chevron and other petroleum producers, including British Petroleum, Tesoro Petroleum, Conoco, and Valero Petroleum. In 2010...
View Full Profile
Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC
OSHA/Workplace & Const. Safety Liability Expert
Raising the Standard Consulting (USA) Inc.
California
Safety, OSHA
-
Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer
Stanford R. Brown, B.Sc., CSP, CIT, CSHP, CRSP, CHSC, has over 35 years of experience managing safety and health for various projects.
He has been involved with multiple construction safety/OSHA cases as an expert witness.
A sampling of the expert witness cases he has been involved with include:
• Workplace injury at refinery construction project.
• Worker fatally electrocuted during a paving incident.
• Construction training and safety standards for power tool injury.
Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii.
Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavat...
View Full Profile
Gary R. Coburn
Restaurant Concept Innovations
San Juan Capistrano, California
Hotel & Restaurant, Slip Trip & Fall
-
Slip Trip & Fall, OSHA, burns, choking, food safety, dram shop, alcohol, negligent security, employee safety, commercial kitchen, customer injuries, ADA, management, franchise, ownership, permitting, training, investing, accounting, premises liability
Award-winning restaurant executive, operator, consultant, and expert witness with over 45 years of experience in the restaurant and hospitality industry. Extensive background in restaurant operations, hospitality management, franchising, staffing and training systems, operational safety, commercial kitchen design/build, concept development, business viability, and restaurant-related disputes.
Over the course of his career, Mr. Coburn has helped create, open, operate, reposition, and advise hundreds of restaurant, bar, hospitality, and foodservice concepts throughout the United States ranging from independent restaurants to regional and national brands. His experience includes service as an owner, operator, franchisor, consultant, President, Chief Operating Officer, and General Manager.
Mr. Coburn remains actively involved in restaurant operations and concept development through Restaurant Concept Innovations and current projects including Lily’s Donuts & Pops and Lily’s Donuts & C...
View Full Profile
Kristen Good, MEM, PhD, CIH
Environmental & Occupational Exposure Scientist
Fort Collins, Colorado
Epidemiology, Industrial Hygiene
-
public health, environmental health, exposure science, exposure assessment, chemical hazard, indoor air quality, aerosols, wildfire, wildfire smoke, COVID-19, OSHA, exposure modeling, inhalation, pandemic, occupational health, occupational safety, toxicology, risk assessment, emergency management, heat
Dr. Kristen Good is an Epidemiologist, Certified Industrial Hygienist (CIH), and Exposure Scientist with over 15 years of experience in risk assessment, toxicology, exposure assessment, and environmental sciences. She has worked across academia, research, private industry, and government. She has a Ph.D. in Environmental Health (epidemiology concentration) from Colorado State University, a Master’s degree in Environmental Management, (toxicology focus) from Duke University, and a B.S. in Biology from Boston College. Her work has focused on human exposure, risk assessment, and health outcomes (respiratory pathogens, wildfires, biomass burning, mold, and chemical exposures).
Dr. Good has served as the leading technical authority in occupational health and indoor air quality at the Colorado Department of Public Health and Environment (CDPHE) since 2020. She manages the state’s indoor air quality improvement programs (including work related to improving IAQ in schools, workplaces, and ...
View Full Profile
Matthew J Hartley, BS, LC, MIES
Nationally Recognized Lighting Expert
Matt Hartley Lighting, LLC
Arvada, Colorado
Engineering, Architecture
-
Lighting, Illumination, Interior Lighting, Street and Area Lighting, Lighting Survey, Fixture Construction, Lighting Installations, Premises Liability Lighting, Security Lighting, Insufficient Lighting, Accident Investigation Lighting, Human Factors, Slip & Fall, OSHA, Glare, Visibility, Walking and Working Surfaces, Control Systems
Illumination Engineer, consultant, teacher, inventor, forensics investigator, and expert in lighting. My 30+ years of experience has immersed me in different facets of the lighting industry. I have worked for companies that cater to lighting design, lighting equipment manufacturing, 3d modeling lighting software, sales and service including post occupancy evaluation. My design experience includes indoor/outdoor lighting, safety and security, lighting and human health, glare, roadway lighting, sports lighting, and lighting standards. Since 1999, I have been involved with standard writing committees within the Illuminating Engineering Society (IES). For the IES, I served on 13 IES committees, of which was the chair of 7 of those committees producing over 11 standards documents.
Teaching has also been a part of my career, instructing diverse groups from high school students to seasoned lighting professionals allowing these individuals to understand the concepts on their level. ...
View Full Profile
Robert M Traynor, EdD, MBA, DFAAA, FNAP
Audiology: Hearing Loss & Tinnitus
Robert Traynor Audiology, LLC
Fort Collins, Colorado
Audiology, OSHA
-
Audiologist, Hearing, Tinnitus, Hyperacusis, Air Bag Deployment Injury, Hearing Aids, Hearing Aid Fitting Techniques, Hearing Handicap, Tinnitus Handicap, Worker's Compensation, CAOHC Certified Occupation, Audiometric Assessment, Audiology Malpractice, Hearing Product injury, Hearing Loss, Noise, Explosions, Shootings
46 years of clinical practice in audiology, hearing industry consultant, trainer, professor, conference speaker, practice manager, author and former military audiologist. 50 years teaching courses and training clinicians within the field of audiology with specific emphasis in hearing loss, tinnitus rehabilitation, noise induced hearing loss, Audiology Practice Management (Coauthor: Strategic Practice Management, 4th Edition). Coauthor: Forensic Audiology. Adjunct Faculty in Audiology at the Rush University, Chicago, IL; Salus/Drexel University, Elkins Park, PA; and The University of Arkansas for Medical Sciences, Little Rock, AR.
Dr. Traynor holds the designation: Distinguished Fellow of the American Academy of Audiology, Experience includes:
• Clinical Audiology - Hearing Assessment - Hearing Rehabilitative Treatment, Hearing Aids, Hearing Conservation,
Board Certified: American Speech Lang. Hearing Association, Certificate of Clinical Competence - Audiology
...
View Full Profile
Nathan Boswell, CSP, CRSP, CMIOSH
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Colorado & Nationwide)
Denver, Colorado
OSHA, Safety
-
FMCSA/DOT, MSHA, Industrial Accidents, Confined Space, Slips / Trips, Lockout/Tagout, Premises Liability Expert, Trenching & Excavation, Scaffolding, Cranes & Rigging, Forklifts, Workplace Safety, Amputations, Construction Safety, Fall Protection, Ladder Safety, OSHA Citations, Construction Accidents, Machine Guarding, Electrocutions
Overview:
Safety and health executive and consultant with over 15 years of progressive experience, including hands-on field work, executive leadership, consulting, and expert witness engagements. Holds board-certified and chartered professional designations in the U.S. (CSP), Canada (CRSP), and U.K. (CMIOSH).
Certifications:
- Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
- Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
- Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
Expertise:
Recognized expertise in occupational and transportation safety compliance, including the practical application of OSHA Construction and General Industry standards (29 CFR 1926 and 1910) and FMCSA/DOT regulations (49 CFR) within multi-employer, high-risk environments. Demonstrated experience investigating significant incidents, a...
View Full Profile
Steven R. Sawyer, ARM, MS, CSP
OSHA Safety & Agriculture Expert Witness
LSW & Associates Safety Consulting Services, LLC
Pueblo West, Colorado
OSHA, Safety
-
Grain Bin Engulfment, Lockout/Tagout, Machine Guarding, OSHA Regulations, Grain Augers/Belt Conveyors, Workplace Injuries/Fatalities, Skid-steer Loaders, Forklift, Front End Loaders, Agricultural Equipment Operations, Telehandlers, Confined Spaces, Safety Training/Policies, OSHA General Industry, Chemical Safety/Haz-Com
Board Certified Safety Professional (CSP) with a Master’s Degree in Safety Management and an Associate of Risk Management (ARM).
Twenty-five years- experience as a safety consultant working with clients in General Industry and Agribusinesses to prevent incidents and protect workers.
Speaker at state safety conferences and trade associations.
OSHA Authorized General Industry Trainer for 10 and 30 Hour courses.
Ives certified trainer for forklifts, telehandlers, skid-steers, front end loaders, back hoes, boom lifts and scissor lifts.
Conducted fatality and catastrophic incident investigations for clients.
Audited client’s safety programs to determine compliance with government regulations and determine areas for improvement.
Assisted clients with OSHA inspections and citation abatement.
Assisted clients with safety program development and conducted safety training.
Professional member of the American Society of Safety Professionals.
View Full Profile
Chip Darius, OHST, CIT, CSHO, CUSP
OSHA and Safety Expert Witness
Safety Priority Consultants, LLC
Cromwell, Connecticut
OSHA, Safety
-
forklift, slip trip & fall, machine guarding, amputation, material handling, occupational safety & health, aerial lift, boom lift, scissor lift, work zone, traffic, flagger, scaffold, ladder, lockout/tagout, Emergency Medical Services, mobile elevating work platform, excavation, railroad, MEWP
Safety expert retained in over 440 cases, state and federal. Deposition and trial testimony for matters in over 20 states. 35 years experience in safety & health and OSHA compliance consulting & training for industry, construction, utilities, and emergency services. Frequent speaker at conferences and seminars - international, national, regional, state and local.
Over 24 years as Instructor for OSHA Training Institute Education Center Region 1 (Boston region) and Adjunct Faculty at Keene State College, teaching OSHA standards & policies, technical topics, accident/incident analysis, related ANSI standards, and Outreach Trainer courses for both construction and general industry. Lead instructor for fall protection, scaffold, and work zone safety courses.
Construction Safety Professional of the Year, Associated General Contractors of Connecticut, 2022.
Authorized OSHA Outreach Trainer for both construction and general industry. ATSSA Master Instructor.
Experienced in:
Personal in...
View Full Profile
Craig L Moskowitz, PE, MBA, MS
CLM Engineering Associates, LLC
Stamford, Connecticut
Premises Liability, Construction Defects
-
OSHA, construction, slips/trips/falls, storm damage, water intrusion, roofing systems, warranty inspections, civil engineering, structural engineering, building collapse, property condition assessment, building codes, forensic engineering, engineering expert, construction accidents, personal injury
Since 2010, the President and Managing Member of CLM Engineering Associates, LLC, which concentrates its focus on forensic engineering/expert witness work for the insurance industry and legal community. In addition, we offer construction management, civil engineering and building inspection services.
Prior experience includes extensive construction management work on both commercial and residential projects. Performed safety inspections on both civilian and military projects through application of OSHA regulations. Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million. Design document creation and management of high-rise construction in Manhattan. marketplace. Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating.
Directed and managed all water distribution system and sewer system work while working as a contractor to th...
View Full Profile
Thomas I. Fitzgerald, Esq.
Boynton Beach, Florida
Transportation, Accident Reconstruction
-
Trucking, Trucks, Commercial Vehicles, Truck Safety, Overweight, tank truck, weight restrictions, hazardous materials, compliance, fatigue, work zone, distracted driving, cargo tank, impaired driving, rollovers, Data Q, DOT, Driver qualifications, OSHA, loading
Thought leader on trucking and commercial vehicle safety and accident reconstruction. Lieutenant and Commanding Officer, Massachusetts State Police Commercial Vehicle Enforcement Section (2010-2022). Certified accident reconstructionist. Licensed attorney. Experienced expert and fact witness.
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Florida
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Amin Terouhid, Ph.D., PE, PMP, CFE
Scheduling, defect, safety, damages,& fraud expert
Adroit Consultants, LLC
Florida
Construction Defects, OSHA
-
Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, personal injury, standard of care, fraud, construction inspection, loss of productivity, critical path method (CPM), OSHA, damages expert, damages analysis, trip and fall, CPM, scheduling, Delay
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, construction fraud, defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims.
Served numerous times as an expert witness in trial, testimony, and deposition.
Licenses
• Examined and certified as a Professional Engineer (P.E.)
• Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE)
• Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP)
• Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and S...
View Full Profile
Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM
Physician and Certified Industrial Hygienist
Center for Occupational and Environmental Health
Orlando, Florida
Occupational Medicine, Industrial Hygiene
-
Toxicology, Mold, Indoor Air, OSHA, metals, chromium, lead, mercury, ethylene oxide, ethylene dibromide, chemical exposure, CIH, Workers Compensation, Firefighter, arsenic, Police Officer, Deputy Sheriff, Disability Evaluation, toxic tort, CDL
I bring the medical background of being both a board certified occupational medicine physician as well as being a Certified Industrial Hygienist to your issue. I have experience in large chemical exposure (toxic tort) cases involving multiple claimants as well as indoor air quality litigation. I have evaluated indoor air quality issues from the perspectives of both an occupational medicine physician regarding symptoms and medical testing, as well as a Certified Industrial Hygienist regarding air quality sampling of occupied structures.
My attributes include the following: Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified Physician in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM) and the International Academy of Independent Medical Examiners (FIAIME). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP)....
View Full Profile
Clinton J. Ford, M. Sc. ACA, CGC, CIE, CMR, CRMI
Premises Liability Expert Witness
Advanced Building Consultants
Alachua, Florida
Construction, Premises Liability
-
Appraisal & Valuation, Arbitration, Building Inspection, Construction, Construction Defects, Environmental, Indoor Air Quality, Mold, OSHA, Premises Liability, Safety, Slip, Mediation, Building Codes, Codes, Trip, Fall, Stairs, Floors, Railings
Clinton J. Ford M.S… is the President and founder of Advanced Building Consultants. He is a recognized expert in all forms of Premise Liability (including Walkway Safety analysis & Tribometry), Construction, and Environmental issues. Mr. Ford has over three decades of construction experience on projects ranging from $5,000 to $50,000,000 and has spent over thirty (30) years providing construction consulting and expert witness services to the legal industry. Ford’s exemplary casework displays his investigative prowess in a vast variety of claim topics. Using up-to-date technology combined with his elite knowledge of building codes, standards, and statutes, Ford is consistently able to present analysis and witnessing that can be described as nothing but expert.
Mr. Ford offers attorneys consulting and litigation support assistance in Building Construction / Environmental Claims that have resulted in property damage, personal injury, and/or wrongful death. Advanced Building Consult...
View Full Profile
John A Thomazin, PE, DFE, CXLT, ACTAR
Engineering Clarity for Unusual Cases
Áreté Forensics, PLLC
Oviedo, Florida
Mechanical Engineering, Accident Reconstruction
-
Premises Liability, Safety, Slip Trip & Fall, Products Liability, HVAC, Equipment & Machinery, Bicycles, Plumbing, OSHA, Manufacturing, Property Damage, Agriculture Engineering, Construction Defects, Building Inspection, Elevators & Escalators, Swing Stage, Telehandler, Boom Lift, Cause & Origin, Horizontal Grinders
I am a licensed Professional Engineer (P.E.), ACTAR-accredited accident reconstructionist, and board-certified Diplomate Forensic Engineer (DFE) with over 30 years of experience in mechanical, civil, and structural analysis. I specialize in difficult and unusual cases where traditional engineering expertise may fall short. My work provides attorneys, insurers, and adjusters with clear, objective, and defensible opinions.
Mathematics serves as the universal language of engineering, enabling me to work seamlessly across civil, mechanical, and electrical domains. This versatility is uncommon among forensic engineers, who typically specialize in a narrow field. I apply mathematical principles to accident reconstruction, construction defect evaluations, machinery and product failures, premises liability, storm damage, and forensic assessments of mechanical and structural systems. Attorneys retain me for challenging cases involving complex systems or unique fact patterns because I can co...
View Full Profile
Dustin Hickey, CSP, CRSP, CMIOSH, CMQ/OE
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Texas & Nationwide)
Florida
OSHA, Safety
-
Construction Safety, Industrial Safety, Confined Space, Slips/Trips, Lockout/Tagout, Machine Guarding, Trenching/Excavation, Scaffolding, Cranes & Rigging, Forklift, Workplace Safety, Aerial Lifts, Amputations, Material Handling, Electrocution, Ladder Safety, OSHA, Construction Accident, Warehouse Safety, Fall Protection
Board-certified and chartered safety & health executive and consultant, holding designations in the United States (CSP), Canada (CRSP), and the United Kingdom (CMIOSH). 20+ years of relevant work experience from field to executive leadership followed by safety consulting and safety expert witness work. Expert in OSHA 29 CFR 1910/1926 interpretation, compliance auditing, and safety management systems.
— CERTIFICATIONS —
· Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
· Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
· Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
— EXPERTISE —
· Construction Safety
· Manufacturing Safety
· Industrial Safety
· OSHA Compliance
· Workplace Safety & Health
· Premises Liability
· Confined Spaces
· Fall Protection, Elevated Work
· Lockout/Tagout (Control of Hazardo...
View Full Profile
Gregory G. Zigulis, MS, BSCE, MBA, CIH, CSP
Construction/Multiemployer Safety - Certified CSP
Sixth Sense Safety Solutions
Florida
OSHA, Safety
-
multi-employer worksites, OSHA standards, safety & health obligations, serious and fatal injury prevention, contractor safety, OSHA citation policy, construction safety programs, ladder safety, toxic exposures, equipment-machine accidents, workplace falls, site inspections, forklifts, mobile elevated work platforms
40 years of occupational safety, health (including industrial hygiene), and environmental management experience within several industries. This includes roles as an Air Force Bioenvironmental Engineering officer (final rank of Captain, with industrial hygiene and environmental responsibilities), regional Occupational Health and Safety (OHS) management for a hazardous waste cleanup company, OHS management for a Prime Contractor to the Department of Energy (Oak Ridge, TN), construction safety and construction fatality research for the University of Tennessee under contract to the Department of Labor/Occupational Safety and Health Administration (OSHA), OHS management for a consumable dental supplies and metals related manufacturing/machining company, OHS management for an international gas engine manufacturer within a global automotive manufacturer, regional environmental, health and safety (EHS) management and global safety team member for a Tier 1 auto parts manufacturer, regulatory...
View Full Profile
David Wright, CSP, CSHO
OSHA & Workplace Safety Expert
Titusville, Florida
Safety, OSHA
-
Occupational Health & Safety, Confined Space, Excavation, Water Treatment Plants, Wastewater Treatment Plants, Lockout/Tagout, Hazard Communication, Machine Guarding, Fall Protection, Amputation, Electrical Safety, NFPA 70e, Water, Wastewater, Tilt Wall
As a Certified Safety Professional (CSP), a certified safety and health official (CSHO), and over 30 years of experience, I have managed and led the implementation of the safety and risk management programs of some of the largest companies in the United States.
I am also an authorized OSHA outreach trainer for both the construction and general industry. I am recognized for contributing to developing and maintaining "world-class" safety cultures in diverse sectors such as construction, landscaping, water, wastewater, transportation, and municipal solid waste services.
Instructor for Region 1 OSHA Training Institute for over 9 years, teaching the OSHA standards and technical topics for general industry and construction. I have been a lead instructor for Confined Space, Excavation, and OSHA Train the Trainer courses (500, 501, 502, & 503).
Experienced in:
Safety training requirements, failure to train, and inadequate training matters;
Occupational safety & health regulations, poli...
View Full Profile
Alex LeBeau, PhD, MPH, CIH
Experienced Exposure and Dose Assessment Expert
Exposure Assessment Consulting, LLC
Orlando, Florida
Industrial Hygiene, Toxicology
-
Indoor Air Quality, Exposure risk, Risk Assessment, Legionella, Legionnaires disease, PFAS, Environmental Science, Building science, Mold, Bacteria, Dose Assessment, Heavy Metal, Risk, Pesticide, PCB, Food, Waterborne Pathogens, Product Safety, OSHA, Antimicrobial
Problem solving Certified Industrial Hygienist (CIH) with over 16 years of experience evaluating environmental and occupational exposures to chemicals and biological agents (e.g., bacteria) from the industrial hygiene and toxicology perspective. History of performing human health risk assessments at contaminated sites using U.S. EPA and state regulatory guidelines and monitoring remediation activities at those sites enabling me to analyze risk and determine if any workers or residents would be impacted by residual contamination and/or remediation activities. I perform indoor environmental quality assessments to evaluate exposure impacts on building occupants - including Legionella and water quality assessments - at healthcare, residential, commercial, and industrial facilities as part of the comprehensive overall building science aspect of indoor environmental quality. Experience co-authoring industry guidance on COVID-19 and presented on COVID-19 at a number of conferences as an...
View Full Profile
David Collette
Walkway Safety Auditor for Forensic Analysis
Substratum Group, Inc
Florida
Slip Trip & Fall, Premises Liability
-
slip, trip, fall, stairway, ramp, sidewalk, lighting, cleaning, flooring, bath mats, parking stripes, tubs, tile, forensic analysis, walkway auditor, coefficient of friction, surface roughness, parking lot, ADA, OSHA
Mr. Collette has a degree in Mechanical Engineering and is a qualified Walkway Auditor. He has over 20 years of experience in developing, commercializing, analyzing, and troubleshooting walkway solutions including chemistry, tools, mats (walk-off, bath), cleaning processes, coatings, treatments, and flooring material selection. He worked in global innovation, product management/development, and customer solution development for DiverseyLever (institutional chemical business of Unilever), JohnsonDiversey (now Diversey), and Cintas.
Mr. Collette is a Walkway Audit Certificate Holder (#31) and has a Certificate in Assessing Walkway Safety from the University of Northern Texas. He provides walkway management services to commercial and institutional facilities across North America. Mr. Collette provies walkway management consulting and services to customers designing, planning, building, maintaining, and insuring facilities. Consulting services include flooring material testing and spec...
View Full Profile
Kimberly Pierce, SMP, CHST
Safety and OSHA Compliance Expert Witness
KAJE Legacy LLC
Port St Lucie, Florida
Safety, OSHA
-
fall protection, boom lift, aerial lift, ladder, occupational safety & health, MEWP, slip trip and fall, scissor lift, work zone, confined space, OSHA, excavation, scaffold, lockout/tagout, electrical shock
Experienced Safety Professional (20 years) in multiple industries. Construction experience (14 years) - laborer, carpenter, and ironworker. Experience in safety/OSHA compliance and training in 1910 General Industry and 1926 Construction standards. Construction Health and Safety Technician (CHST) and Safety Management Professional (SMP). American Society of Safety Professionals (ASSP) Professional Member. Actively working as a safety professional.
Safety responsibilities and training encompass fall protection, lockout/tagout procedures, OSHA accident investigations, aerial/scissor lift training, and safety oversight.
National Association of Women in Construction
American Society of Safety Professionals
National Safety Council
View Full Profile
Richard W Carr, PhD
FMCSA Expert - 40+ Years Experience
R W Carr, Inc.
Jacksonville, Florida
Trucking, Safety
-
FMCSA, FMCSR, DOT, OSHA, Tank Truck, Loading, Unloading, Forklifts, Driver Qualifications, Drug & Alcohol, Hours of Service, Hazardous Materials, cargo, Safety, Vehicle Inspection, Fleet Safety, Commercial Drivers, CDL, Driver Hiring Standards, Record Retention
Richard W. Carr is the principle of R W Carr, Inc., a Risk Management & Safety Consulting company based in Jacksonville, FL. which primarily serves the transportation industry, insurance industry and the legal profession.
Mr. Carr has been Operations Manager – Transportation for Olin Chlor Alkali Products, Inc. in which he oversaw a private fleet of tractor trailers delivering hazardous materials throughout the western United States until June 2014. Prior to this he was Director of Risk Management, Safety & Health for Masco Contractors Services, Inc.; a nationwide company employing as many as 20,000 employees at 350 facilities and operating up to 10,000 motor vehicles. Prior to this he was Managing Director of Transurance Risk Retention Group, Inc. and Phoenix Risk Services, Inc., an Arizona licensed Risk Retention Group and a third-party claims administrator respectively whose specialty was commercial motor vehicle fleets. Prior to this, he was Vice President-Safety & Risk Man...
View Full Profile
Troy Willingham, registered architect
47+ year architect+owners rep w 2 masters degrees
Willingham Architecture: design, consulting, management
St. Petersburg, Florida
Premises Liability, Architecture
-
Slip and Fall, Premises Liability, Trip Hazard, Stairway Code Compliance, ADA Accessibility, Building Codes, Construction Defect, Design Defect, Forensic Architect, Standard of Care, Water Intrusion, Roof Leak, Lighting Safety, Premises Safety, Handrail Guardrail, Building Envelope, Plans and Specification, Construction Defects, OSHA
EXPERT WITNESS FOR PERSONAL INJURY & CONSTRUCTION DEFECT CASES
47+ Years in architecture, engineering, project management, and forensic analysis.
Retained by attorneys nationwide for premises liability, slip/trip/fall, building code violations, and construction defect litigation.
AREAS OF EXPERTISE (Search-Optimized)
Premises Liability / Personal Injury – Slip, trip & fall hazards, flooring slip resistance, stair/handrail code compliance, lighting & visibility safety, ADA accessibility, egress route compliance
Construction Defects – Building envelope failures, water intrusion, roofing/wall waterproofing defects, workmanship quality, design defect & standard of care analysis
Building Code Violations – IBC, IRC, Florida Building Code, ADA, OSHA, AHCA compliance reviews
Plans & Specifications Review – Accuracy, completeness, and code adherence
Delay & Cost Overruns – Contract compliance & AIA standard interpretation
SERVICES FOR ATTORNEYS
Forensic Site Inspections – On-site evalu...
View Full Profile
Dana Heimdahl Chernault, MS, CSP, REM
OSHA Expert for General Industry and Construction
Edgewater Safety and Risk Management Consulting, LLC
Port Charlotte, Florida
Safety, OSHA
-
Accident investigation, confined space, fall protection, personal protective equipment and gear, slip and fall, DOT, construction safety, construction accidents, electrical injury and damage, machine guarding, hazardous materials, safety standards, warehouse safety, manufacturing safety, hazardous waste, workers compensation
Ms. Heimdahl Chernault is a respected professional with over 30 years of expertise in the field of occupational safety and risk management. A proud Army veteran and former helicopter pilot, she also holds a Master of Science degree in Risk Control—specializing in Safety, Environmental Management, and Industrial Hygiene—from the University of Wisconsin-Stout. Her certifications include the Certified Safety Professional (CSP) #19177, awarded by the Board of Certified Safety Professionals (BCSP), and the Registered Environmental Manager (REM) designation, through the National Registry of Environmental Professionals (NREP). She is also an OSHA authorized outreach trainer for construction.
Ms. Heimdahl Chernault was named J.J. Keller's "Safety Professional of the Year" for 2023.
Her expansive experience spans diverse industries, including:
General Industry: Large and small-scale manufacturing, warehousing, commercial airlines, and semiconductors.
Construction: Comprehensive safety o...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Georgia
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Amin Terouhid, Ph.D., PE, PMP, CFE
Scheduling, defect, safety, damages,& fraud expert
Adroit Consultants, LLC
Georgia
Construction Defects, OSHA
-
Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, personal injury, standard of care, fraud, construction inspection, loss of productivity, critical path method (CPM), OSHA, damages expert, damages analysis, trip and fall, CPM, scheduling, Delay
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, construction fraud, defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims.
Served numerous times as an expert witness in trial, testimony, and deposition.
Licenses
• Examined and certified as a Professional Engineer (P.E.)
• Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE)
• Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP)
• Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and S...
View Full Profile
Joshua Tolbert
PEG, Inc.
Smerna, Georgia
Engineering, Premises Liability
-
Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following:
Accident Reconstruction & Investigations
Building Codes
Concrete Failures
Construction & Environmental
Construction Equipment Accidents
Construction Safety & Related Codes
Cooling Towers & Hydraulics
Electrical Engineering
Excavation, Blasting & Trenching
Exhibit Reconstruction & Investigations
Fall Protection
Highway & Transportation Problems
Mechanical Engineering
Metallurgy & Welding / Failure Studies
OSHA Issues
Paints, Coatings & Lead Abatement
Premise Liability
Product Failure & Liability Issues
Safety Issues (Construction, Industrial & Product)
Slips, Trips & Falls
Software Engineering Studies
Structural Steel & Building Failure Studies
View Full Profile
Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC
OSHA/Workplace & Const. Safety Liability Expert
Raising the Standard Consulting (USA) Inc.
Honolulu, Hawaii
Safety, OSHA
-
Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer
Stanford R. Brown, B.Sc., CSP, CIT, CSHP, CRSP, CHSC, has over 35 years of experience managing safety and health for various projects.
He has been involved with multiple construction safety/OSHA cases as an expert witness.
A sampling of the expert witness cases he has been involved with include:
• Workplace injury at refinery construction project.
• Worker fatally electrocuted during a paving incident.
• Construction training and safety standards for power tool injury.
Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii.
Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavat...
View Full Profile
Adam K Aleksander, PhD, PE, CSP
Aleksander & Associates P.A.
Boise, Idaho
Human Factors, Products Liability
-
Mechanical, Industrial, Safety Engineering, Forensic Engineering, Human Factors, Product Liability, Warnings, Labels, Defects, Visibility, Reconstruction, Failure Analysis, OSHA, Construction, Equipment Failures, Industrial Accidents, Power Utility Accidents, Insurance Claims, Photogrammetry
Dr. Aleksander has a diversified Engineering background with specific experience (50 years) in Manufacturing, Cost Analysis, Consulting Engineering, Engineering Sales, Project Management, Product Development, Research, Lecturing, and Technical / Litigation Forensic Engineering Investigations of accidents and equipment failures. He has worked extensively in heavy industry (conveyors, biomass boilers, electric utilities) as well as the Forensic Engineering practice. Dr. Aleksander was the founding chair of the ASTM committee E58 on Forensic Engineering. He worked overseas on some 40 occasions in multiple South East Asia locations, and was involved in innovative efforts in international plastics mitigation. His academic credentials (Ph.D. Human Factors and Safety Engineering) bring a solid foundation to issues regarding product liability, warnings, labels, and use, based on a decades of development and research, and standards. This training also compliments Dr. Aleksander's experience...
View Full Profile
Mark E Briggs, CSP
Workplace Safety & Liability Expert Witness
Safety Management Resources Corporation
Champaign, Illinois
Safety, OSHA
-
safety, OSHA 31000, Risk, Lockout Tagout, Confined Space, University, College, Inspection, Workplace, Liability, Scaffold, Injury, Forklift, Ladder, Construction
View Full Profile
HENDRIK BOTTERMAN, CSP
Construction & General Industry Safety & OHSA
DAMARKY SAFETY CONSULTANTS, LLC
MANHATTAN, Illinois
OSHA, Construction
-
Fall Protection & Prevention PFAS, Multi-Employer Work Site, Excavation & Trenching, Ladder & Scaffold, Slip & Trip, Steel Erection, Welding & Cutting, Heavy Construction Equipment Back over Run over Struck By, Confined Space, Crane Safety Critical Pick Planning & Rigging, Work Zone, Hand Arm & Tool Safety, Forklift
Over 30 years as a safety executive and OSHA compliance manager, trainer, advisor, and leader on major construction projects throughout the USA. He has investigated, analyzed, and prepared professional opinions and testimony on safety matters over the course of the past 20+ years. Expert at applying OSH Act of 1970 standards, regulations, policies, and Letter of Interpretation. Experience includes over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations. Expert at incident investigation, and injury management and investigation.
AREAS OF EXPERTISES INCLUDES: • Liability Assessment & Contractor Duty of Care • Accident Investigation & Root Cause • Aerial Lifts, MEWP • Construction Safety/Accidents • COVID Safety & Pandemic Management • Crane Safety, Critical Pick Planning, & Rigging • Disaster & Emergency Management • Dive/Underwater Operations • EM-385 U.S. Army Corps of Engineers • Excavation, Trenching, & Soil Mechanics • Slip, Trip, ...
View Full Profile
Stephen (Steve) Yates, CHST
Safety Expert - Manufacturing & Construction
UpVantage Strategies, LLC
Bolingbrook, Illinois
Safety, OSHA
-
National, Chicago, Illinois, Michigan, Atlanta, Georgia, Charlotte, North Carolina, Commercial and Residential Construction, Manufacturing, Industrial, Multi-Employer Worksite, Machine Guarding, Metal Coil Processing Welding and Fabrication, Precast Concrete, Food Processing and Manufacturing
Over 27 years of experience as a workplace safety consultant, trainer, conference speaker and educator. Expert in applying the Occupational Safety & Health Act (OSHA) regulations and policies to worker safety, assisting over 450 companies nationally across most construction trades and heavy manufacturing. Services provided include regulatory compliance gap analysis, program and safety management system development, incident and injury investigation including slips, trips, falls, amputations, and fatality, OSHA inspection management, workplace inspection, and training. Also frequently providing strategy and coaching to top management regarding management systems and leadership. An experienced expert, retained to provide litigation support as expert or fact-based analysis.
View Full Profile
Michael P. Lawler, MS, CSP, ASP, CHST
Construction Safety, Liability Analysis, Multi ER
Safewit, Inc.
Orland Park, Illinois
OSHA, Construction
-
Struck by Equipment, back over, Fall Protection, Multi-Emplyer, Fall Prevention, slip trip & fall, aerial lift, crush, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift
Over 30 years as a safety executive and OSHA compliance manager, trainer, advisor, and leader on major construction projects throughout the USA. Expert at applying OSH Act of 1970 standards, regulations, policies, and Letter of Interpretation. Experience includes over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations. Expert at incident investigation, accident reconstruction, and injury management and investigation. Extensive experience and expertise in MUTCD Traffic Controls and rules.
AREAS OF EXPERTISES INCLUDES:
• Liability Assessment & Contractor Duty of Care
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Crane Safety, Critical Pick Planning, & Rigging
• Disaster & Emergency Management
• Dive/Underwater Operations
• EM-385 U.S. Army Corps of Engineers
• Excavation, Trenching, & Soil Mechanics
• Slip, Trip, Falls, Stirs & Floor Safety Certi...
View Full Profile
Andy Nieto, CSP, CHST
Construction and General Industry safety
Safety Litigation Services LLC
Saint Charles, Illinois
Safety, OSHA
-
Safety Liability Expert, Construction Safety, Industrial Safety, Multi-Employer work site, OSHA regulations, Accident investigation, Cranes and Rigging, Electrical, Lock out/Tag out, Trenching and Excavation, Ladders/Stairs, Slips, Trips, Falls, Confined Space, Fall Protection, Welding, Demolition
Mr. Nieto is a Certified Safety Professional (CSP) and Construction Health and Safety Technician (CHST). His work is performed in support of safety liability matters pertaining to both the construction and industrial sectors. He has investigated, analyzed, and prepared professional opinions in over 400 safety matters, and has offered testimony on over 100 occasions in jurisdictions nationwide.
View Full Profile
Nathan Boswell, CSP, CRSP, CMIOSH
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Colorado & Nationwide)
Illinois
OSHA, Safety
-
FMCSA/DOT, MSHA, Industrial Accidents, Confined Space, Slips / Trips, Lockout/Tagout, Premises Liability Expert, Trenching & Excavation, Scaffolding, Cranes & Rigging, Forklifts, Workplace Safety, Amputations, Construction Safety, Fall Protection, Ladder Safety, OSHA Citations, Construction Accidents, Machine Guarding, Electrocutions
Overview:
Safety and health executive and consultant with over 15 years of progressive experience, including hands-on field work, executive leadership, consulting, and expert witness engagements. Holds board-certified and chartered professional designations in the U.S. (CSP), Canada (CRSP), and U.K. (CMIOSH).
Certifications:
- Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
- Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
- Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
Expertise:
Recognized expertise in occupational and transportation safety compliance, including the practical application of OSHA Construction and General Industry standards (29 CFR 1926 and 1910) and FMCSA/DOT regulations (49 CFR) within multi-employer, high-risk environments. Demonstrated experience investigating significant incidents, a...
View Full Profile
Adam Birchfield, CSP, CHST
OSHA Construction Accident Investigation
A & A Safety Consulting
Hanover, Indiana
OSHA, Construction
-
Fall Protection, EM385-1.1, OSHA and ANSI Standards, Scaffolds, Accident Investigation, General Contractor requirements, Crane Accidents, Steel Erection, Multi-employer Worksites, Excavations & Trenching, Slips, trips, and Falls, Effective Safety training, failure to train, and Inadequate training
Seasoned Safety and Health Professional with experience in managing complex safety operations across diverse industries, including construction, general industry, chemical plants, military, and federal projects. My career spans roles as a Safety Specialist with the US Army Corps of Engineers, where I managed safety program elements, conducted hazard assessments, and provided critical training to personnel at all levels. Contributions also extend to the EM385.1.1 update for the Army Corps of Engineers Headquarters, highlighting my technical decision-making abilities and leadership skills.
Qualifications:
• In-Depth Expertise: I have comprehensive knowledge of OSHA regulations, standards, and policies, honed through years of practical experience and continuous professional development.
• Versatility: My background encompasses diverse safety areas, including fall protection, scaffolding, crane safety, excavation, accident investigation, and more.
• Proven Record: I have been retained a...
View Full Profile
Randy Gray, CHST, CSHM, GSP, OHST, BS, MS
Grayhawk Advantage, Inc., dba. Grayhawk Safety & Health Consulting Company
Benton, Kentucky
OSHA, Safety
-
OSHA, Industrial Accidents, Safety, Industrial Hygiene, Loss Control, Risk Management, Slip Trip & Fall, Construction Accidents, Manufacturing Accidents, Insurance, Investigations
Mr. Gray provides expert witness services in defense and plaintiff litigation matters, safety and health on-site audits, customized OSHA safety and health training, OSHA 10 and 30-hour construction and general industry training, and assistance for employers who have been issued citations that they need assistance with obtaining better citation settlement agreements and working in conjunction with legal counsel with litigation assistance contesting OSHA citations.
Highly-experienced OSHA Forensic Expert Witness with 75 separate fatality and more than 150 non-fatal work-related accidents.
25+ years of OSHA compliance with 29 CFR regulations related to construction and general industry.
8 years of private Safety and Health Consulting specializing in Defense and Plaintiff's occupational injuries, conducting safety and health audits, Authorized OSHA Outreach Trainer for construction and general industry, and employer assistance with settlement of OSHA citations, and testifying in O...
View Full Profile
Bart J Leist, CSP
OSHA & Workplace Safety Expert
Triad Safety
Louisville, Kentucky
Safety, OSHA
-
Accident Investigation, Safety Programs, Lockout, tagout, Machine Guarding, Fall Protection, Fall Prevention, Respiratory Protection, Personal Protective Equipment, Powered Industrial Trucks, Forklifts, Aerial Lifts, Scissor Lifts, General Industry, Construction, and Manufacturing
SEAK Certificate of Completion for Running an Expert Witness Practice.
Certified Safety Professional.
36 years in safety & health management.
25 years in safety consulting.
Authorized OSHA Construction Outreach Trainer.
United States Marine Corps Reserve, Retired, Rank of Major.
Marine Corps Infantry Officer.
Safety Director at Colgate-Palmolive.
Safety Specialist at Phillip Morris.
Year 2000, started Compass Safety. Providing safety consulting services to General Industry and Construction companies.
Duties included evaluating, improving, and implementing safety & health programs.
Experienced in conducting OSHA compliance audits, hazard assessments, accident investigations, safety inspections, employee safety training, lockout / tagout procedures, and Safety Director duties and responsibilities.
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Kentucky
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Tara L Pase
Bramel Engineering, LLC
Tracys Landing, Maryland
Structural Engineering, Civil Engineering
-
Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis
Civil/Structural Engineering
Construction Defects
Building Codes
OSHA
Failure Analysis
Strength of Materials
Concrete/Steel/Wood/Masonry Design
Concrete/Steel/Wood/Masonry Analysis
Seismic Design and Analysis
Wind Design and Analysis
Foundations and Retaining Structures
Grading and Soil Properties
Field Repair Designs
Stormwater Management
Component/Connection Design and Analysis
Construction Cost Estimates
Building Envelope (Moisture Barriers)
Construction Management
Registered Professional Engineer, State of New York, License No.087752
Registered Professional Engineer, State of Maryland, License No.42640
Registered Professional Engineer, Commonwealth of Virginia, License No.051210
Registered Professional Engineer, State of New Jersey, License No.24GE05239300
View Full Profile
H. Landis "Lanny" Floyd II, PE, CSP, CESCP, CUSP, CMRP, CRL, Life Fellow IEEE
Electrical safety and injury prevention
Electrical Safety Group Inc.
Elkton, Maryland
Electricity, Safety
-
workplace electrical safety, arc flash, electrical safety management, electrical codes & standards, NFPA70E, National Electrical Code, electrical injury, electrocution, electrical reliability, electrical maintenance, electrical construction, occupational electrical safety, OSHA, NESC, electric shock
I am an expert, author, speaker, and educator in occupational electrical safety, and author of "Hidden Risk in Occupational Electrical Safety: Through the Lens of System Safety." I received my BSEE from VA Tech in 1973. My 45+ year career with DuPont focused on electrical safety in the construction, operation, and maintenance of DuPont facilities worldwide. My responsibilities included improving management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance in all DuPont operations. I have published more than 90 peer-reviewed papers and magazine articles on occupational electrical safety. I have received awards from leading institutions recognizing my work to advance the practice of electrical safety. I am an adjunct faculty member in the graduate school of Advanced Safety Engineering and Management (ASEM) at the University of Alabama at Birmingham (UAB). At UAB, I teach Prevention through Design, Engineering E...
View Full Profile
Joseph Green
OSHA compliance and construction safety issues
Construction Safety & Consultation Services, LLC
Boston, Massachusetts
OSHA, Construction
-
Fall Protection, OSHA cases, Construction accidents, Trenching/Excavating, Multi employer policy, Window washing, Struck by incident, Aerial Lifts, Welding & cutting, Ineffective training, Caught in between, Steel erection, Carpentry, Personal Injury, Holes/covers, Safety programs, Overhead protection, Slips/trips, Demolition, Equipment
Joseph Green is an OSHA safety expert witness and consultant with more than 25 years of experience in construction safety, regulatory enforcement, and accident investigation. A former OSHA Compliance Assistance Specialist, Assistant Area Director, and Compliance Safety and Health Officer, he brings extensive hands-on experience directing complex inspections, accident investigations, and fatality investigations. Mr. Green works with attorneys, contractors, and organizations nationwide to provide clear, authoritative guidance on OSHA compliance and construction safety matters.
________________________________________
AREAS OF EXPERTISE
• OSHA Compliance & Enforcement — Construction (29 CFR 1926)
• OSHA Field of Operations Manual/OSHA Inspection procedures
• Construction Safety — Residential & Commercial
• Multi-Employer Worksite Analysis
• Accident & Fatality Investigations
• Fall Protection & Residential Construction
• Excavation & Trenching Safety
• Scaffolding & Mast Climbing Platf...
View Full Profile
Mark Franklin
OSHA Compliance Occupational Safety Expert
Cove Acre Corp
Somerset, Massachusetts
Safety, OSHA
-
Construction Safety, General Industry Safety, Hazardous Waste Operations and Emergency Response, Confined Space Entry, Fall Protection, Slip, Trip, Fall, Hazard Communication (Chemical), Fork Lift, Respiratory Protection, Machine Guarding, Aerial Lift Safety, Roofing Safety, OSHA, PPE, Excavation, Safety Training, Boom Lift
Mark Franklin has over 28 years of experience in Environmental, Health, and Safety Management, Training and Consulting across many industries, including construction, manufacturing, chemical, pharmaceutical and others. Mr. Franklin has applied industry experience in chemical emergency response, hazardous waste management, safety and environmental program management, OSHA regulatory compliance, and management program auditing (safety, quality, environmental). Mr. Franklin is a highly experienced dynamic trainer in over 80 individual training topics.
Litigation Support - Mr. Franklin owns the Cove Acre expert witness practice. He leverages his years of experience in Occupational Health and Safety management, consulting, and training for his expert witness clients. He has investigated over 150 incidents including serious injuries, fatality, chemical spills, and equipment and facility damage. Mr. Franklin's services are available to attorneys representing plaintiff and defendant. Mr. F...
View Full Profile
Gregory G. Zigulis, MS, BSCE, MBA, CIH, CSP
Construction/Multiemployer Safety - Certified CSP
Sixth Sense Safety Solutions
Rogers City, Michigan
OSHA, Safety
-
multi-employer worksites, OSHA standards, safety & health obligations, serious and fatal injury prevention, contractor safety, OSHA citation policy, construction safety programs, ladder safety, toxic exposures, equipment-machine accidents, workplace falls, site inspections, forklifts, mobile elevated work platforms
40 years of occupational safety, health (including industrial hygiene), and environmental management experience within several industries. This includes roles as an Air Force Bioenvironmental Engineering officer (final rank of Captain, with industrial hygiene and environmental responsibilities), regional Occupational Health and Safety (OHS) management for a hazardous waste cleanup company, OHS management for a Prime Contractor to the Department of Energy (Oak Ridge, TN), construction safety and construction fatality research for the University of Tennessee under contract to the Department of Labor/Occupational Safety and Health Administration (OSHA), OHS management for a consumable dental supplies and metals related manufacturing/machining company, OHS management for an international gas engine manufacturer within a global automotive manufacturer, regional environmental, health and safety (EHS) management and global safety team member for a Tier 1 auto parts manufacturer, regulatory...
View Full Profile
Nancy M McClellan, M.P.H., CIH, CHMM
Chem., Bio. & Physical Hazards Risk Assessment
Occupational Health Management, PLLC
Utica, Michigan
Industrial Hygiene, Indoor Air Quality
-
Chemical & Biological Hazard Assessment, Pharmaceutical Containment, Covid Pandemic Risk Assessment, Bioaerosols, Air Disinfection Technologies, Ergonomic Musculoskeletal Disorders, Noise, Respiratory Protection, Indoor Air Quality, Dermal & Inhalation Exposure Modeling, Statistical Analysis, OSHA
Award winning, industrial hygiene and safety expert with over 25 years of broad international experience practicing, teaching and authoring to anticipate, recognize, evaluate, control and prevent workplace health and safety hazards in high hazard industries. As an expert witness for both plaintiff and defense (50/50) I have provided consultation for both airborne and dermal exposure cases for chemical and biological agents. I have evaluated and modeled exposures, reconstructed exposure events, quantified dose following standardized practices for exposure assessment, and applied best practice statistical methods and science in forming my opinions. Throughout the pandemic, I reviewed and prioritized over 100 air disinfection devices for the nation's largest facilities maintenance organization, and as a result I have extensive expertise in pandemic response management including chemical and non-chemical disinfectant exposure evaluation and controls and best practice indoor air qua...
View Full Profile
James M. Miller, PE, PhD
Engineering Safety, Agricultural, Batteries, Nano
J.M. Miller Engineering, Inc.
Ann Arbor, Michigan
Safety, Agriculture Engineering
-
Accidents, Auto ADAS, Agriculture, Battery Fires, Cannabis Processing, Chemical Exposure, Child Safety, Construction, Electrocution, Ergonomics, Fitness Equipment, Fires/Explosions, HazCom, Human Factors, HVAC, Mechatronics/Nano, Medical Devices, OSHA, Recalls, RV/ATV
There are four PhD and registered Professional Engineers at Miller Engineering who are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. These co-founders and associates are James M. Miller, PE, PhD; Mark R. Lehto, PhD; David R. Clark, PE, PhD; Adam M. Olshove, PE, MSE; and Jeffrey D. Rupp, MSE. Miller Engineering has a dedicated office with a full-time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise includes the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. Miller Engineering’s principle engineers wrote the original books on warnings and instructions, have published in several other areas, have participated in product designs and patents, and have analyzed, reconstructed and/or animated numerou...
View Full Profile
Larry Dunville
Crane & Hoist Expert- OSHA certified, B30.2 member
Overhead Crane Consulting, LLC
Sawyer, Michigan
Equipment & Machinery, OSHA
-
Crane, Overhead Crane, Electric Overhead Traveling Crane, Bridge Crane, Overhead Bridge Crane, Top Running Crane, Gantry Crane, Jib Crane, RTG crane, Hoist, Wire rope hoist, electric hoist, Monorail, OSHA, LOTO, Pinch points, Radio Control crane, crane contracts, crane failure, crane injury
D. LARRY DUNVILLE
- 45+ years in the crane industry
- A graduate of the University of Notre Dame and Harvard Business School
- For 35 years as the president/owner of Dearborn Crane and Engineering, a designer, manufacturer and installer of overhead cranes
Owner/President
- Dearborn Crane & Engineering Inc. 1975- 2012
CURRENTLY A CRANE CONSULTANT FOR COMPANIES INCLUDING;
- General Dynamics,
- USAir Force,
- Austal Boatworks,
- AECOM Construction, (world's largest General Contractor)
- Bridgestone,
- Jefferson Lab National Accelerator,
- Freeport McMoRan/Morenci Mine,
- Metropolitan Water District of Southern California/Parker Dam,
- Carpenter Steel,
- JE Dunn Construction
Former member of;
- AIST (American Institute of Steel Technology) Technical Committee #6 Mill Duty Cranes
Former Executive Director for the CCAA (Crane Certification Association of America)
CURRENTLY A MEMBER OF;
- ASME/ANSI B30.2 Overhead and Gantry Cranes,
- ASME/ANSI B30.16 Overhead Electric Hoists
...
View Full Profile
Richard J (Rick) Larkin, MA, CEM®
Larkin and Associates, LLC DBA Beacon Safety Services
Edina, Minnesota
Emergency Preparedness, Safety
-
Emergency Plans, OSHA, Workplace Safety, Incident Inv, Disaster, Incident Mgt, Crisis Mgt, Emergency Procedures, Special Event Emergency Response, Incident Command System, Failure to Plan, Evacuation, Hazard Analysis, Negligence, Emergency Services, Major Event Emergency Operations, Preparedness
I am a Certified Emergency Manager® (CEM), awarded and recognized by the International Association of Emergency Managers (IAEM) and am able to translate “theory-to-practice”; while relying on my numerous years of experience and knowledge of complex industry standards to provide clear, understandable and practical assessment and advice. I am currently a certified Emergency Medical Technician - Basic, following 33 years as a certified Paramedic.
Over 35 years experience in emergency services operations and management, (Fire/Rescue, Emergency Medical Services, Emergency Preparedness/Disaster Management). Hundreds of emergency responses to fires, rescues, emergency medical, and critical incidents. Significant involvement in major disaster response, training and exercises. Broad experience in planning and preparedness for large-scale planned events and event operations coordination ranging from a multi-day State Fair with 1 million attendees, to civil unrest, and sporting events.
Nu...
View Full Profile
Doug Rush, CIH, CSP, CHMM, OHST, MSc
Certified Industrial Hygiene or Hygienist (CIH)
Scopus Consultants, Inc.
Springfield, Missouri
Industrial Hygiene, Safety
-
Warnings & Labels, IAQ, Products Liability, Covid, Indoor Air Quality, Toxicology, Asbestos, Environmental, Mold, Legionella, Pesticides, Dermal Assessment, Exposure, Occupational Hygiene, COPD, Forensic Science, Environmental Engineering, Job Hazard Assessment, OSHA, Safety
Summary of Experience
Board-Certified HSE Expert | Industrial Hygiene & Forensic Exposure Analysis
I am a highly credentialed Health, Safety, and Environmental (HSE) expert with over 35 years of experience and a unique background spanning military leadership, corporate consulting, and forensic investigation. As a CIH, CSP, and CHMM. I provide specialized technical analysis and expert testimony regarding complex injuries and illnesses stemming from chemical, biological, and physical hazards.
My forensic expertise focuses on the reconstruction of current and historical exposures to high-stakes substances, including asbestos, benzene, welding fumes, lead, mold, and pesticides. I have a proven track record of managing multidisciplinary teams of doctors, engineers, and scientists to investigate workplace incidents and product liability claims.
A retired USAF Chief Master Sergeant (CMS) and former Superintendent Industrial Hygienist, I bring a level of discipline, leadership, and tech...
View Full Profile
Christopher E. Janson, MS, CSP, CHMM
Haines, Janson & Associates LLC
St. Louis, Missouri
Safety, Premises Liability
-
Slip Trip & Fall, Retail Safety, Equipment & Machinery, Human Factors, Slip Resistance, Accident Investigation/Reconstruction, OSHA, Guarding, Failure Analysis, Construction, Industrial & Premises Accidents
Haines, Janson & Associates provides safety and risk management consulting services. Christopher E. Janson, Board Certified Safety Professional (CSP); Certified Hazardous Materials Manager (CHMM); Certified User of the English XL slip resistance measuring device (CXLT). Mr. Janson has held safety management positions with several Fortune 500 companies. He has also worked with a variety of firms as a consultant for the insurance industry. Mr. Janson is a professional member of the American Society of Safety Engineers.
View Full Profile
John H Hamilton, MSME PE
Mechanical/safety engineering expert
Missouri
Engineering, Mechanical Engineering
-
OSHA, equipment & machinery, occupational safety, machine guarding, plastics processing equipment, lockout-tagout (LOTO), Injection molding machines, blow molding machines, industrial accidents, thermoformers, product warning, product defect, machine design, pumping-piping systems, patents, patents
Mr. Hamilton is a highly experienced licensed mechanical engineer. He has 25+ years of teaching experience. He is an experienced expert witness who has testified at over 70 depositions and over 15 trials
Mr. Hamilton, is a full-time faculty member of the University of Arkansas. In this faculty position he is responsible for teaching undergraduate mechanical engineering courses.
Previously Mr. Hamilton worked as a full-time consulting engineer assisting professionals in both industry and the legal community by serving as a consultant and as an expert witness. As an expert, Mr. Hamilton has evaluated hundreds of consumer, industrial and agricultural incidents related to safety, machine guarding and mechanical engineering.
He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other indu...
View Full Profile
Logan F. Martin, PhD, MBA, PMP, CIH, CSP, CHMM
Safety/Industrial Hygiene/Construction/OSHA Expert
LF Martin LLC
Hampton, New Hampshire
OSHA, Safety
-
Construction Safety, Workplace Safety, Industrial Hygiene, Toxicology, Training, Industrial, Manufacturing, Machine Guarding, Falls, Compliance, Environmental, Exposure, Health Hazards, Expert Witness, Accident, Risk Assessment, Respiratory, Chemicals, Hazard Communication, Investigation
Dr. Martin provides highly specialized expert witness and litigation support services for complex workplace injury, fatality, and OSHA citation cases. Working closely with counsel, she leverages her deep regulatory expertise to navigate severe OSHA enforcement actions, successfully employing defenses such as unpreventable employee misconduct and the Multi-Employer Citation Policy. Her proven track record includes reconstructing incident timelines, analyzing site configurations, and auditing historical training records to secure citation deletions, downgrade willful violations, and significantly reduce regulatory penalties. Beyond immediate litigation defense, Dr. Martin routinely assists legal teams and corporate clients in negotiating OSHA Consent Orders and executing post-incident corrective actions, including comprehensive safety management system upgrades and proactive hazard mitigation strategies.
Dr. Martin has 36 years of experience in occupational safety and health consult...
View Full Profile
Joe Monaco
Monaco Group, Inc.
Martinsville, New Jersey
Safety, OSHA
-
Forklifts, Forklift Training, Content Validation (Test/Evaluation), Forklift Safety, Accident Reconstruction, Forklift Expert, Forklift Operating Standards, Forklift Operator Management, Forklift Certification, Powered Industrial Trucks, ANSI B56.1, OSHA 1910.178
33 years experience in forklift (powered industrial trucks) safety, OSHA, and performance management consulting.
Speaker at international, national, state, and local conferences and seminars. Author of forklift focused articles and presentations emphasizing both forklift safety and productivity. Co-author of a chapter in a university text book addressing human performance technologies: Chap 4, “Solve the Problem…So it STAYS solved”.
Performs accident reconstruction by reverse engineering probable behavior of the parties.
View Full Profile
Amin Terouhid, Ph.D., PE, PMP, CFE
Scheduling, defect, safety, damages,& fraud expert
Adroit Consultants, LLC
Upper Saddle River, New Jersey
Construction Defects, OSHA
-
Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, personal injury, standard of care, fraud, construction inspection, loss of productivity, critical path method (CPM), OSHA, damages expert, damages analysis, trip and fall, CPM, scheduling, Delay
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, construction fraud, defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims.
Served numerous times as an expert witness in trial, testimony, and deposition.
Licenses
• Examined and certified as a Professional Engineer (P.E.)
• Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE)
• Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP)
• Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and S...
View Full Profile
Cheryl Scanlon-Zinner, CSP
Construction Safety, Falls from Height
Safety Research, Inc.
Audubon, New Jersey
OSHA, Safety
-
Fall Protection, Construction, Construction Safety, Industrial Safety, Slip/Trip/Fall, Construction Accidents, Scaffold safety, Ladders, Ladder Safety, Trenching & Excavation, Excavation Safety, Trench Safety, Power Tools, Forklifts, Powered Industrial Trucks, Standard of Care, Machine Guarding, Falls from Height, Roofing Accidents
Cheryl Scanlon-Zinner is a board-certified safety professional with over thirty years of experience developing and implementing occupational safety programs in construction and general industry for employers, corporations and government agencies. She has trained thousands of management representatives, supervisors, and competent persons on the principles and practices of safety management, hazard identification, hazard evaluation and the implementation of the hierarchy of controls.
She specializes in hazards that are likely to cause serious injuries and fatalities (SIFs), including falls from elevation, and other construction hazards, machinery hazards, forklifts, and ladders.
She was the technical editor of Nigel's Ellis's textbook Introduction to Fall Protection.
Cheryl is a member of several professional safety organizations. She was the president of the Philadelphia chapter of the American Society of Safety Professionals and is active in that organization. She was awarded th...
View Full Profile
David Del Vecchio, AIA, CID, RCS, NCARB, LEEDap
Design and Construction Expert Witness
David Del Vecchio, Architect, LLC
Cranford, New Jersey
Architecture, Construction Defects
-
ADA, OSHA, Contracts, Tenant / Landlord, Construction Administration, Interior Design, AIA Contract Documents, Design Defects, Standard of Care, Affidavit of Merit, Architectural Copyright / Intellectual Property, Residential Design, Commercial / Retail Design, Change Orders, Building Envelope, Consumer Fraud Act
David Del Vecchio has over 34 years experience as an active practicing architect and expert witness. He is licensed in multiple states and is a Certified Interior Designer in NJ. He holds an RCS Building Inspector license, and an NCARB certificate. Licensed in NJ, NY, CT, PA, MA, and FL. Provided expert services in IL and the Bahamas.
David taught at Essex County College for 8 years, including Construction Means and Methods, Architectural Design, and Architectural History.
Cases have involved ADA / Building Accessibility; Personal injuries and wrongful death matters involving design or construction; Building codes and associated regulations; Building envelope design, water infiltration, mold, EIFS, roofing, windows, vapor barrier, masonry specifications, standing seam roofing, flat roofs; Architectural copyright, intellectual property, standard of care; Premises litigation, BOMA / Common Area / Tenant Area measurements and area calculations; Illegal construction / construction w...
View Full Profile
ANTHONY CORRADO, CHST, SSM, CSFSM, OSHA-Trainer
CONSTRUCTION SAFETY & LIABILITY EXPERT
NYC Safety Services, LLC
Closter, New Jersey
Construction, Safety
-
Construction Accidents & Injuries, New York Labor Law, OSHA, Scaffolding, Construction Safety, Falls-Holes-Covers, Construction Standard of Care, Aerial Lifts, Fork-Lifts, Reinforced Concrete, Excavations, Shoring, Underpinning & Foundations, Steel Erection, Personal Injury, Cranes, Scaffolding, Ladders, Demolition
Anthony Corrado is Founder and Principal of NYC Safety Services, LLC, a safety consulting firm in New York City that provides NYC contractors with Site Safety Plan Development, OSHA Training and on-site Licensed Safety Professionals who oversee safety on large scale construction projects as regulated by the NYC Department of Buildings.
Anthony has had a long successful and diversified career in the NYC construction industry spanning almost 40 years. Starting at a young age as a Union Carpenter apprentice and working his way up to becoming a carpenter foreman in his early twenties, Anthony has continued his education and became a superintendent working on interior renovations in hi-rise buildings throughout NYC. He continued to progress and was continuously given larger projects and more responsibilities. Anthony rose through the ranks becoming a Senior Project Superintendent for a top 10 Construction Management company in the US and successfully managed projects up to $150 Million....
View Full Profile
Chuck Graziano, CPM, PCAM
Certified Property Manager
Thundering Brook Associates
Ramsey, New Jersey
Property Management, Premises Liability
-
condominium, homeowners, cooperatives, apartments, commercial, Real Estate, industrial parks, safety, slips, trips, falls, OSHA, landlord, tenants, financial, property management, premises liability, townhomes, townhouse, manager
Engaged in the property management industry for over 42 years. Independent consultant serving owners and managers of real estate of various types (commercial and residential) and providing services as an expert witness in related matters.
Current (2017 to present) engagement includes working with a management firm with accountability for training its property managers in industry standards and best practices, overseeing the firm’s program to ensure that all managers are certified with industry credentials, and assisting managers in managing risk at client properties.
A Certified Property Manager (CPM®) as awarded by the Institute of Real Estate Management (IREM) since 1987 (Key number 11420) and past (1998) President of the New Jersey Chapter (No. 1) of IREM. Certified in 1990 as a Professional Community Association Manager (PCAM) by the Community Associations Institute (Pin Number 186) and has been (previously) certified as a Certified Manager of Community Associations by the Na...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
New York
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Dennis W. Eckstine
Eckstine & Associates, Inc.
New York
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
View Full Profile
FRANK CUMSKY
Construction Safety & Accident Expert Witness
FCSAFETYCONSULTING LLC
NEW ROCHELLE, New York
Construction, Safety
-
Construction Accidents, Construction Safety, Failure Analysis, Accepted Practices, Housekeeping, Expert Witness, DOB Site Safety Coordinator, Slip & Fall Accidents, Struck by Object, Holes/Covers, New York Labor Laws, OSHA, Scaffolding, Electrocution, Shoring, New York Industrial Code, Fall Protection, Ladders, Demolition, Cranes
I am a construction safety consultant and expert witness with over 40 years of hands-on experience as a Project Superintendent and New York City Licensed DOB Site Safety Coordinator. Through managing and supervising complex construction projects over the years, I have developed expertise in all facets of construction, along with an in-depth understanding of New York State Labor Law, Industrial Code, and OSHA regulations.
I possess a comprehensive knowledge of NY State Labor Laws 200, 240, 241; Industrial Code Chapter 23; NYC Building Code; and OSHA regulations.
I Provide specialized consulting and expert testimony in construction-related injury cases, including depositions and review of all relevant documentation.
I Review and analyze construction reports to identify potential breaches of safety standards and violations of NY State Labor Laws, NY State Industrial Code, and Federal OSHA regulations.
I Prepare comprehensive expert reports outlining deviations from accepted const...
View Full Profile
ANTHONY CORRADO, CHST, SSM, CSFSM, OSHA-Trainer
CONSTRUCTION SAFETY & LIABILITY EXPERT
NYC Safety Services, LLC
New York
Construction, Safety
-
Construction Accidents & Injuries, New York Labor Law, OSHA, Scaffolding, Construction Safety, Falls-Holes-Covers, Construction Standard of Care, Aerial Lifts, Fork-Lifts, Reinforced Concrete, Excavations, Shoring, Underpinning & Foundations, Steel Erection, Personal Injury, Cranes, Scaffolding, Ladders, Demolition
Anthony Corrado is Founder and Principal of NYC Safety Services, LLC, a safety consulting firm in New York City that provides NYC contractors with Site Safety Plan Development, OSHA Training and on-site Licensed Safety Professionals who oversee safety on large scale construction projects as regulated by the NYC Department of Buildings.
Anthony has had a long successful and diversified career in the NYC construction industry spanning almost 40 years. Starting at a young age as a Union Carpenter apprentice and working his way up to becoming a carpenter foreman in his early twenties, Anthony has continued his education and became a superintendent working on interior renovations in hi-rise buildings throughout NYC. He continued to progress and was continuously given larger projects and more responsibilities. Anthony rose through the ranks becoming a Senior Project Superintendent for a top 10 Construction Management company in the US and successfully managed projects up to $150 Million....
View Full Profile
David Del Vecchio, AIA, CID, RCS, NCARB, LEEDap
Design and Construction Expert Witness
David Del Vecchio, Architect, LLC
New York
Architecture, Construction Defects
-
ADA, OSHA, Contracts, Tenant / Landlord, Construction Administration, Interior Design, AIA Contract Documents, Design Defects, Standard of Care, Affidavit of Merit, Architectural Copyright / Intellectual Property, Residential Design, Commercial / Retail Design, Change Orders, Building Envelope, Consumer Fraud Act
David Del Vecchio has over 34 years experience as an active practicing architect and expert witness. He is licensed in multiple states and is a Certified Interior Designer in NJ. He holds an RCS Building Inspector license, and an NCARB certificate. Licensed in NJ, NY, CT, PA, MA, and FL. Provided expert services in IL and the Bahamas.
David taught at Essex County College for 8 years, including Construction Means and Methods, Architectural Design, and Architectural History.
Cases have involved ADA / Building Accessibility; Personal injuries and wrongful death matters involving design or construction; Building codes and associated regulations; Building envelope design, water infiltration, mold, EIFS, roofing, windows, vapor barrier, masonry specifications, standing seam roofing, flat roofs; Architectural copyright, intellectual property, standard of care; Premises litigation, BOMA / Common Area / Tenant Area measurements and area calculations; Illegal construction / construction w...
View Full Profile
Amin Terouhid, Ph.D., PE, PMP, CFE
Scheduling, defect, safety, damages,& fraud expert
Adroit Consultants, LLC
New York
Construction Defects, OSHA
-
Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, personal injury, standard of care, fraud, construction inspection, loss of productivity, critical path method (CPM), OSHA, damages expert, damages analysis, trip and fall, CPM, scheduling, Delay
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, construction fraud, defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims.
Served numerous times as an expert witness in trial, testimony, and deposition.
Licenses
• Examined and certified as a Professional Engineer (P.E.)
• Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE)
• Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP)
• Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and S...
View Full Profile
Nathan Boswell, CSP, CRSP, CMIOSH
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Colorado & Nationwide)
New York
OSHA, Safety
-
FMCSA/DOT, MSHA, Industrial Accidents, Confined Space, Slips / Trips, Lockout/Tagout, Premises Liability Expert, Trenching & Excavation, Scaffolding, Cranes & Rigging, Forklifts, Workplace Safety, Amputations, Construction Safety, Fall Protection, Ladder Safety, OSHA Citations, Construction Accidents, Machine Guarding, Electrocutions
Overview:
Safety and health executive and consultant with over 15 years of progressive experience, including hands-on field work, executive leadership, consulting, and expert witness engagements. Holds board-certified and chartered professional designations in the U.S. (CSP), Canada (CRSP), and U.K. (CMIOSH).
Certifications:
- Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
- Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
- Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
Expertise:
Recognized expertise in occupational and transportation safety compliance, including the practical application of OSHA Construction and General Industry standards (29 CFR 1926 and 1910) and FMCSA/DOT regulations (49 CFR) within multi-employer, high-risk environments. Demonstrated experience investigating significant incidents, a...
View Full Profile
C.J. Abraham, PhD, P.E., DPE, JD, FRSC, FTI, DEE, IH
Great Neck, New York
Products Liability, Slip Trip & Fall
-
Athletics & Recreation, Safety, Safety Engineering, Warnings & Labels, Industrial Hygiene, OSHA, Risk Analysis, Biomechanics, Engineering, Fires, Explosions, Human Factors, Brain Injuries, Personal Injury, Trampolines, Amusement Parks, Water Parks, Playground Accidents
Dr. Abraham is a licensed P.E. and a Senior Member and a Diplomat in The National Academy of Forensic Engineers. Over the last 45 years, C. J. Abraham has created warnings and instructions for many products and protocols applied and used worldwide. He has consulted to major news channels, NHTSA, OSHA, NIOSH, State of California (CaITrans), Microsoft, New York Transit, Queensborough Bridge Authority, Department of Agriculture, the Federal Government, State Attorney General's Offices, and municipalities throughout the United States, Canada and Europe in a variety of technical areas.
His interests include head and brain protection in sports and recreation and personal injury accidents and litigations. In addition, he is also involved in the reconstruction of all types of sports injuries in a large variety of recreational and sports activities, amusement and trampoline facilities, as well as accidents involving a variety of products and vehicles. His background may be found at www...
View Full Profile
Timothy M Crumb, CSP
Construction and General Industry Safety Expert
Safety Consulting Services
Pittsford, New York
Safety, OSHA
-
OSHA, Safety, Construction, Roofing, Electrical Safety, Lockout/Tagout, LOTO, Hazardous Energy, Hazardous Energy Control Plans, Fall Protection, Cranes, Rigging, Commercial Roofing, Structural Integrity, Training, Investigation, Fall Hazards, Construction Accidents, Scaffolding, Certified Safety Professional
Safety Consulting Services - Owner/Operator
Trainer and consultant for employers dealing with OSHA enforcement proceedings. Provided direct representation for clients in negotiations with OSHA staff including compliance officers, area directions and regional solicitors. Settled and litigated more than 50 contested cases involving complex multiemployer jobsites, accident investigations, complaints, referrals and fatalities.
Proposed and finalized detailed hazard abatement across multiple industry sectors including construction and manufacturing.
Conducting inspections and writing reports to allow employers to come into compliance with NYS Code Rule 59 when their EMRs exceed the statutory requirement of 1.0
Services: Mock OSHA Inspections, OSHA Site Safety Audits, OSHA Litigation Consultation, Expert Witness Services
Elmer W. Davis, Inc - Corporate Safety Director
Trained EWD employees in multiple OSHA/NYS/EWD required courses such as: Fall Protection, Forklift/Rough Terrain ...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Jamestown, North Carolina
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Joe DeFranco, CSP
Board Certified Safety Professional
Safety Consulting Specialists, Inc.
Raleigh, North Carolina
Safety, OSHA
-
Construction, Personal Injury, Equipment & Machinery, Forklifts, Slip Trip & Fall, Lockout/Tagout, Scaffold, Aerial Lift, Crane, Rigging & Signaling, MSHA, Accident Investigation, Construction Safety, Ladders, Machine Guarding, Dropped Objects, Struck-by, Crush Hazards
25+ years of experience in construction, industrial, and crane safety consulting. Retained in over 70 cases for both OSHA 1926 Construction and OSHA 1910 General Industry. Board Certified Safety Professional since 2001.
OSHA 500 course in Construction Safety-Outreach Trainer
NCCCO Certified Crane Operator
NCCCO Certified Crane Inspector
MSHA Certified Instructor
Supervisor Training in Accident Reduction Techniques (S.T.A.R.T.)
Certified Independent STAR Assessor
American Society of Safety Professionals (ASSP) Member
Experienced in:
-Occupational safety and health policies & standards
-Personal injury, catastrophic injury, and fatality cases
-Multi-employer worksites
-Crane accidents
-Crane safety
-Mobile and overhead cranes
-Rigging & Signalperson
-Trenching and excavation
-Confined space
-MSHA Part 48 & 46
-Contractor safety
-Chemical safety including lead, silica, hexavalent chromium, and ammonia safety
-Noise
-Fall protection
-Scaffolding
-Forklift, Aerial lift
-Accident inve...
View Full Profile
Kevin A Rider, PhD, PE, CHFP
Human Factors Expert
Forensic Human Factors, LLC
Delaware, Ohio
Human Factors, Traffic Engineering
-
Distracted driving, Driving behavior, Reconstruction, Biomechanics, Maritime, Manufacturing, Mining, OSHA, Premises Liability, Products Liability, Safety, Slips, Trips, Falls, Transportation, Warnings, Conspicuity, Cell phones, Texting, Lighting
Dr. Kevin Rider is a human factors expert and owner of Forensic Human Factors, LLC, providing investigations, reports and expert testimony for personal injury cases – plaintiff and defense. His expertise involves investigating how people interact with other people, products and environments in predictable ways, and applying this understanding to effective, efficient and safe products, services and systems. He has been consulted as an expert in 49 states (so far).
Dr. Rider’s expertise includes:
• MVAs and pedestrian collisions, incl. trucks, trains, buses, motor/bicycles
• Illumination, nighttime visibility, and conspicuity
• DUI/DWIs, where intoxication was not a proximate cause of crash
• Adequacy of product designs and warnings
• The design and maintenance of safe civil and occupational environments
• Premises liability, and slips, trips and falls
• Workplace and construction safety
Dr. Rider is a Professional Engineer (PE), a Certified Human Factors Professional (CHFP), and ...
View Full Profile
David Collette
Walkway Safety Auditor for Forensic Analysis
Substratum Group, Inc
Loveland, Ohio
Slip Trip & Fall, Premises Liability
-
slip, trip, fall, stairway, ramp, sidewalk, lighting, cleaning, flooring, bath mats, parking stripes, tubs, tile, forensic analysis, walkway auditor, coefficient of friction, surface roughness, parking lot, ADA, OSHA
Mr. Collette has a degree in Mechanical Engineering and is a qualified Walkway Auditor. He has over 20 years of experience in developing, commercializing, analyzing, and troubleshooting walkway solutions including chemistry, tools, mats (walk-off, bath), cleaning processes, coatings, treatments, and flooring material selection. He worked in global innovation, product management/development, and customer solution development for DiverseyLever (institutional chemical business of Unilever), JohnsonDiversey (now Diversey), and Cintas.
Mr. Collette is a Walkway Audit Certificate Holder (#31) and has a Certificate in Assessing Walkway Safety from the University of Northern Texas. He provides walkway management services to commercial and institutional facilities across North America. Mr. Collette provies walkway management consulting and services to customers designing, planning, building, maintaining, and insuring facilities. Consulting services include flooring material testing and spec...
View Full Profile
John H Hamilton, MSME PE
Mechanical/safety engineering expert
Oklahoma
Engineering, Mechanical Engineering
-
OSHA, equipment & machinery, occupational safety, machine guarding, plastics processing equipment, lockout-tagout (LOTO), Injection molding machines, blow molding machines, industrial accidents, thermoformers, product warning, product defect, machine design, pumping-piping systems, patents, patents
Mr. Hamilton is a highly experienced licensed mechanical engineer. He has 25+ years of teaching experience. He is an experienced expert witness who has testified at over 70 depositions and over 15 trials
Mr. Hamilton, is a full-time faculty member of the University of Arkansas. In this faculty position he is responsible for teaching undergraduate mechanical engineering courses.
Previously Mr. Hamilton worked as a full-time consulting engineer assisting professionals in both industry and the legal community by serving as a consultant and as an expert witness. As an expert, Mr. Hamilton has evaluated hundreds of consumer, industrial and agricultural incidents related to safety, machine guarding and mechanical engineering.
He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other indu...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Ontario
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Steven D High, MPH, MS, CIH, CSP, ARM, CHST, CXLT, EMT(PA)
Safety & Health (OSHA; Slips; Ind. Hygienist)
High Environmental Health & Safety Consulting Ltd.
Lancaster, Pennsylvania
Slip Trip & Fall, Industrial Hygiene
-
Certified Industrial Hygienist, CIH, Workplace Safety, Occupational Safety, Chemical Exposure, Public Health, Trenching, Construction Safety, Rigging, Accident Investigation, Coefficient of Friction, Slip Resistance, Lockout, Electrical Safety, NFPA 70E, Air Quality, Noise, Safety Culture, OSHA, CSP
Over 30 years in Safety & Health.
Authorized Trainer and Instructor-Trainer for the OSHA Training Institute Outreach Education Center in Construction (exp) and General Industry.
Masters Public Health (MPH) (Hopkins), Masters in Safety Sciences (MS) (IUP)
Post-baccalaureate Certificates in Environmental Health & Industrial Hygiene (Johns Hopkins) / Epidemiology & Bio-statistics (Drexel).
Certified Safety Professional (CSP)
Certified Industrial Hygienist (CIH)
Construction Health & Safety Technician (CHST)
Emergency Medical Technician - PA (EMT)
Associate in Risk Management (ARM)
Certified XL Tribometrist (CXLT)(slip-resistance)
Frequent Public Speaker on Safety and Health Issues.
Creative approaches and perspectives to cases.
Defense and Plaintiff work.
Organization Participation and Memberships: Lancaster County Industrial Safety Council (officer positions); American Society of Safety Professionals (ASSP); American Industrial Hygiene Association (AHIA): Full Member; Member of t...
View Full Profile
Dennis W. Eckstine
Eckstine & Associates, Inc.
Waynesboro, Pennsylvania
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
View Full Profile
Kurt Stetzer, CSP. CHST, OHST, CRIS
Construction Safety Expert Witness
Savete Services LLC
McMurray, Pennsylvania
Safety, OSHA
-
Construction Safety, Construction Site Safety, Public Safety, Crane Safety, Helicopter External Lifts, Retail Construction Safety, Multi-employer Construction Sites, Tenant Construction Safety, General Contractor, Construction Contracts, Construction Safety Plans, Safety Procedures, Excavations, Demolition, Renovation Safety
Safety professional with over 35 years of experience predominantly as the General Contractor on multiemployer projects and construction programs. Experienced with safety oversight from the Construction Manager and Owner perspectives. Provided construction safety services in the insurance industry. Created, implemented and supervised/managed corporate and project safety programs and activity-specific procedures (such as mobile crane lifts, helicopter external lifts, demolition, penetrating walls/floors/slabs, etc.).
Extensive experience with mobile crane and helicopter lift planning, plan reviews, oversight, supervision and management in congested construction environments.
Credentialed as a Certified Safety Professional (CSP), Construction Health and Safety Technician (CHST), and Occupational Hygiene and Safety Technician (OHST) by examination through the Board of Certified Safety Professionals. Executive Program in Safety Management certificate from the American Society of...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Pennsylvania
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Mark Franklin
OSHA Compliance Occupational Safety Expert
Cove Acre Corp
Rhode Island
Safety, OSHA
-
Construction Safety, General Industry Safety, Hazardous Waste Operations and Emergency Response, Confined Space Entry, Fall Protection, Slip, Trip, Fall, Hazard Communication (Chemical), Fork Lift, Respiratory Protection, Machine Guarding, Aerial Lift Safety, Roofing Safety, OSHA, PPE, Excavation, Safety Training, Boom Lift
Mark Franklin has over 28 years of experience in Environmental, Health, and Safety Management, Training and Consulting across many industries, including construction, manufacturing, chemical, pharmaceutical and others. Mr. Franklin has applied industry experience in chemical emergency response, hazardous waste management, safety and environmental program management, OSHA regulatory compliance, and management program auditing (safety, quality, environmental). Mr. Franklin is a highly experienced dynamic trainer in over 80 individual training topics.
Litigation Support - Mr. Franklin owns the Cove Acre expert witness practice. He leverages his years of experience in Occupational Health and Safety management, consulting, and training for his expert witness clients. He has investigated over 150 incidents including serious injuries, fatality, chemical spills, and equipment and facility damage. Mr. Franklin's services are available to attorneys representing plaintiff and defendant. Mr. F...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
South Carolina
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
William S Howard, PhD, MBA, PE
Equipment, Machinery, Automation & Robotics
President, Stability Technology, Inc.
Charleston, South Carolina
Mechanical Engineering, Intellectual Property
-
Patents, Intellectual Property, Trade Secrets, machinery, automation, manufacturing, equipment, machine, robots, machine design, robotics, factory, industrial automation, machine vision, sensors, conveyors, safety, OSHA, motion control, PTAB
William S. Howard, PhD is a Machine Design Engineer who specializes in industrial equipment and automation devices. With a background in Mechanical Engineering, Electrical Engineering, and Software Development, as well as 30+ years of experience working with machines, equipment, and automation, Dr. Howard is a specialist in electro-mechanical equipment -- any type of machine, industrial device or automation equipment.
William S. Howard, PhD is a machine expert who has designed and developed equipment for manufacturing factories and plants across the United States. These machines include conveyors, automation devices, robots and robotic machines, cartoners, hi-speed machines, stacking & sorting machines, and packaging equipment.
William S. Howard, PhD is a manufacturing expert with 30+ years experience with OSHA regulations, ANSI standards, and CE regulations. He has designed and developed hundreds of machines -- over $100 million in total value -- which are currently operating ar...
View Full Profile
Ellen Szubski, M.S., Ph.D., CXLT, CPSI, AHFP
Human Factors Expert Witness-Consultant
The Warren Group, Inc.
Irmo, South Carolina
Human Factors, Premises Liability
-
Accident Prevention, Risk Management, Illumination, Conspicuity, Visual Perception, Slip resistance, Playground Safety, Premises Liability, Lighting, Line of Sight, Driver Distraction, Roadway Markings, Environmental Conditions, Slip-Trip- Fall Evaluations, Workplace Injuries, Human Factors, OSHA
Ellen Szubski, Ph.D., is the senior human factors consultant at The Warren Group. She earned a Doctor of Philosophy in Human Factors Psychology and a Master of Science in Applied Psychology from Clemson University. Ellen is also a Certified XL Tribometrist, a Certified Playground Safety Inspector (CPSI), and a Certified Associate Human Factors Professional (AHFP).
Ellen worked in the Clemson Visual Perception and Performance Laboratory examining the factors contributing to the conspicuity of pedestrians and bicyclists in challenging road conditions, such as nighttime driving. She did her dissertation on “The Influence of Pedestrian Biological Motion on Time-To-Collision Estimates at Night”. Prior to entering the forensic field, Ellen planned and conducted experiments for a major bicycle manufacturer that improved bicycle conspicuity. She also conducted laser strike perception and performance studies for the Department of Defense.
Ellen applies her experience in Human Factors t...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Tennessee
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Michael R. Roop, CSP
Confined Space/Fall Protection/Safety Expert
MRE Training & Consulting
Richmond, Texas
Safety, OSHA
-
Fall Protection, Confined Space Entry, Confined Space Retrieval, Confined Space Rescue, OSHA and Standards Compliance, Industry Best Practices, Telecommunication Tower Climbing, Safety Training Accidents, Highway Roadwork Safety, Rail Tank Car Entry and Rescue, Ladder Safety, Trench Collapse
Certified Safety Professional (Safety training, incident investigations, and safety procedures and programs). Roop has many years of experience as both a company as well as a contracted Safety Director.
Court certified expert in fall protection, confined spaces, safety, rescue, law enforcement, trench collapse, OSHA regulations, rail tank car incidents, and safety equipment.
Captain, Louisiana State Police (Retired)
Roop has worked as a specialized safety expert in dozens of cases and has given deposition and courtroom testimony in numerous of those work engagements. Roop’s experience includes performing site investigations and authoring subsequent reports detailing how events proceeded and what individuals/circumstances lead to a specific outcome. Additionally, as a retired uniformed and plain clothes state police officer and commander, Roop has provided evidence and testified in hundreds of felony and misdemeanor trials.
Michael is a highly qualified incident investigator e...
View Full Profile
Patrick J Walsh, CSP
Construction Safety - OSHA Compliance
Walsh Safety Consulting
Georgetown, Texas
OSHA, Construction
-
OSHA, Personal Injury, Property Damage, Risk Management, Loss Prevention, Accident Investigation, Cranes, Rigging, Scissor Lifts, Boom Lifts, Scaffolding, Excavation, Construction Contracts, Forklifts, Telehandlers
Qualified instructor for most areas of commercial and residential construction.
View Full Profile
Jack Brazil, MS, CSP, CHST
Construction Safety and OSHA Expert Witness
Grapevine, Texas
Safety, OSHA
-
OSHA, OSHA Citations, Construction Accidents, Workplace Safety, OSHA Compliance, Industrial Accidents, Forklift Accidents, Crane Safety, Excavation Safety, Multi-Employer Sites, Fall Protection, Scaffolding, Steel Erection, Struck-By Incidents, Slips/Trips/Falls, Work Zone Safety, MUTCD, MEWP, Heavy Equipment, Contractor Duty of Care
Jack L. Brazil, MS, CSP
Construction Safety & OSHA Expert Witness – Texas & Nationwide
Expert Witness Overview
Jack L. Brazil, MS, CSP is a nationally retained construction safety and OSHA expert witness specializing in serious injury and fatality cases involving complex, multi-employer construction worksites. He provides expert opinions regarding OSHA compliance (29 CFR 1910 & 1926), construction standard of care, and the application of ANSI/ASSP consensus standards.
Mr. Brazil brings more than 30 years of construction safety experience, including executive leadership as Vice President of Safety and National Safety Director for ENR Top-20 contractors, where he held direct responsibility for hazard controls, work sequencing, staffing, and risk acceptance on multi-billion-dollar construction portfolios.
His opinions reflect the perspective of a senior safety executive responsible for real-world OSHA implementation, not post-incident or theoretical analysis. He is retained by both ...
View Full Profile
Greg Gerganoff, CSP, Esq.
Rocky Mountain Safety Consulting, Inc.
Houston, Texas
Safety, OSHA
-
OSHA/MSHA compliance, Oil & gas safety, Mining safety, Construction safety, Manufacturing safety, Workplace fatalities, Forklift safety, Conveyor safety, Crushing equipment safety, Fall protection safety, Walking/working surfaces, Pipeline safety, Workplace injuries, Work zone safety
Provide safety expert witness for mining, oil & gas, construction, manufacturing workplace injuries, including Worker’s Compensation Subrogation matters. Provide services to plaintiff or defense. I have worked as a safety professional for companies involving mining, oil & gas and construction and manufacturing for over 19 years.
I am an OSHA General Industry 10 & 30 Hour Authorized trainer, and oil & gas PEC Safeland Trainer for Basic and Core training, holder of Blue Card from MSHA for miner safety training.
“Hydrogen Sulfide-Safety.” Journal of the American Society of Safety Engineer, Professional Safety, Spring 2015.
“Use of OSHA as Standard of Care Negligence Cases.” Trial Talk, Colorado Trial Lawyers Association, March/April 2016.
“Expert Safety Witness Role, Use of the OSH Act as Standard of Care in Common-Law Negligence Cases.” Journal of the American Society of Safety Engineer, Professional Safety, February 2017.
“Implementing an Effective OSH Program Without a Dedi...
View Full Profile
Roger H Hanson, CSHO
Construction & OSHA Workplace Safety Expert
Critical Construction Consultation
La Porte, Texas
OSHA, Safety
-
Construction Safety, Fall Prevention, Ladder & Stairway Safety, Signals & Barricades, Cranes & Rigging, Excavation, General Safety, Scaffold Construction & Safety, Steel Erection, Confined Space, Material Handling, Electrical Safety, Hand & Power Tool Safety, Aerial Man Lifts, Respiratory Protection, Struck-by/Caught-between, PPE
I have 30+ years in the Construction Industry with 15 of those in Construction Safety. I have served in the field as a foreman, superintendent, project manager, safety manager, as well as a Corporate Safety Director, a Construction Safety Consultant, an OSHA Course Trainer and an Adjunct Instructor. Over the course of the last 14 years, I have taught more than 3,500 people and accrued approximately 28,000 instructional hours, all of which are directly related to the competent application of OSHA standards in the work environment.
I hold an OSHA 510 and OSHA 500, as well as a Certified Safety and Health Official (CSHO) from Texas A&M University College of Engineering (TEEX). After completing my certificate, I was employed by TEEX from 2013-2015 as an Adjunct Instructor, teaching OSHA related courses to those in their CSHO certification program. I am a Subject Matter Expert in Personal Fall Arrest Systems and was the major contributor to the Student Fall Prevention/Protection Tex...
View Full Profile
Rene A Melendez
Expert in Manufacturing and Product Liability
MR&A Consulting
El Paso, Texas
Products Liability, Manufacturing
-
Ladders, OSHA, ANSI, CSA, Laboratories, Testing, ISO 17025, ISO 9001, Fall Protection, Storage Eqipment, SRLs, Safety Harnesses, Safety Landyards, Failure Analysis, Quailty, Manufacturing, Engineering, Accidents & Safety, Product Design, Consumer Products
Rene Melendez is a seasoned expert witness and independent consultant with over 15 years of experience specializing in ladder safety, design, and manufacturing standards. His work focuses on evaluating ladder-related injuries and incidents for litigation across the United States. Rene’s consulting engagements span residential, commercial, and industrial ladder use, with deep expertise in extension, step, tripod, and fiberglass ladders.
He specializes in failure analysis, product liability, and injury investigation for climbing products including extension ladders (up to 60 ft), stepladders, scaffolds, planks, attic ladders, and fall protection equipment. Rene regularly partners with engineering and manufacturing teams to ensure all products meet strict U.S. and international safety certifications.
Mr. Melendez has been retained in numerous high-profile cases involving ladder product failures, safety violations, and workplace accidents. He has worked on behalf of both plaintiffs an...
View Full Profile
Dennis W. Eckstine
Eckstine & Associates, Inc.
Texas
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
View Full Profile
Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC
OSHA/Workplace & Const. Safety Liability Expert
Raising the Standard Consulting (USA) Inc.
Texas
Safety, OSHA
-
Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer
Stanford R. Brown, B.Sc., CSP, CIT, CSHP, CRSP, CHSC, has over 35 years of experience managing safety and health for various projects.
He has been involved with multiple construction safety/OSHA cases as an expert witness.
A sampling of the expert witness cases he has been involved with include:
• Workplace injury at refinery construction project.
• Worker fatally electrocuted during a paving incident.
• Construction training and safety standards for power tool injury.
Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii.
Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavat...
View Full Profile
Vince Vittatoe, CPP, CSC, CPTED
Premises Liability & Negligent Security Expert
Vittatoe Consulting, LLC
McKinney, Texas
Security, Premises Liability
-
Inadequate/Negligent Security, Hotel/Motel, Safety/Security, Security Procedures, commercial buildings, Crime Foreseeability, Assaults, Battery, Rape, Robbery, Murder, Parking Lot, Apartments, Violent Crime, Workplace Violence, Wrongful Death, OSHA, emergency/crisis, premises security liability
Vince Vittatoe, CPP, CSC, CPTED, is the Principal/CEO at Vittatoe Consulting, LLC, independent security management and forensic consulting practice focused on providing clients security and loss prevention expertise to help protect their employees and customers.
With over 30 years of combined law enforcement and corporate safety, security, and loss prevention experience, we offer our clients direction and advice from our experience in both the public and private sectors.
After college, Vince worked for State Farm Insurance as an accounting supervisor before joining the Dallas Police Department in 1988, serving as a police officer and divisional defensive tactics instructor. Upon returning to the private sector, Vince entered the hospitality industry and gained operations experience as an Area Manager for Motel 6, responsible for twelve motels. Next, Vince moved to the corporate office of Accor North America as the Director-Safety & Security. Vince held safety, security, and los...
View Full Profile
Kelly C. Knighton, CSP
Former OSHA Regional Administrator - Safety Expert
The Knighton Consulting Group, LLC
Santa Fe, Texas
OSHA, Safety
-
OSHA Compliance, Construction, General Industry, Maritime, Workplace Safety, Safety, Manufacturing, Accident Investigation, Litigation Support, Risk Analysis, Regulatory Compliance, Plaintiff/Defense, Multi-Employer Worksites, OSHA Citations, scaffolding, Lockout/Tagout, confined space, fall protection, machine guarding, Excavation
Kelly C. Knighton is a Board-Certified Safety Professional (CSP) and former senior executive with the Occupational Safety and Health Administration (OSHA), bringing over 30 years of experience in workplace safety, regulatory enforcement, and incident investigation.
Ms. Knighton previously served as OSHA Regional Administrator overseeing one of the agency’s largest regions, directing enforcement and compliance programs across multiple states. She now provides expert consulting and litigation support involving workplace safety standards, OSHA compliance, and catastrophic incident analysis.
Expert Witness Specialties:
- OSHA regulations, compliance, and enforcement
- Construction safety, general industry, and maritime safety
- Workplace incident investigation and root cause analysis
- Fatalities and catastrophic injury analysis
- OSHA citations, including General Duty Clause (5(a)(1))
- Safety management systems and hazard identification
- Regulatory interpretation and industry s...
View Full Profile
John H Hamilton, MSME PE
Mechanical/safety engineering expert
Texas
Engineering, Mechanical Engineering
-
OSHA, equipment & machinery, occupational safety, machine guarding, plastics processing equipment, lockout-tagout (LOTO), Injection molding machines, blow molding machines, industrial accidents, thermoformers, product warning, product defect, machine design, pumping-piping systems, patents, patents
Mr. Hamilton is a highly experienced licensed mechanical engineer. He has 25+ years of teaching experience. He is an experienced expert witness who has testified at over 70 depositions and over 15 trials
Mr. Hamilton, is a full-time faculty member of the University of Arkansas. In this faculty position he is responsible for teaching undergraduate mechanical engineering courses.
Previously Mr. Hamilton worked as a full-time consulting engineer assisting professionals in both industry and the legal community by serving as a consultant and as an expert witness. As an expert, Mr. Hamilton has evaluated hundreds of consumer, industrial and agricultural incidents related to safety, machine guarding and mechanical engineering.
He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other indu...
View Full Profile
Avian Tisdale, MD, MBA, Paralegal
Experienced Physician Executive and Paralegal
DHM Consulting
Richmond, Texas
Pain Management - Medicine, Fraud
-
Adoption, Arbitratilon, Mediation, Banking, Empolyment Law, Business Operations, Dispute Resolution, Document Examination, Failure Analysis, Health Informatics, HIPAA, Hospital Administration, Human Resources, Mangement, Medical Billing, Risk Management, Artificial Intelligence, Technology, School Safety, OSHA
Physician executive with over 20 years of clinical, administrative, and academic experience across hospitals, emergency departments, inpatient units, urgent care centers, and community health systems. Board-certified physician with deep expertise in medical staff management, quality improvement, and regulatory compliance. Dual-trained with a Paralegal certification and MBA in Finance, offering unique insight into how healthcare operations intersect with legal, financial, and risk domains.
Highly experienced in identifying deviations from clinical standards, assessing system-level failures, and providing objective, evidence-based opinions.
Independent, Licensed and Board Certified, Full-time Availability
AREAS OF EXPERTISE
Standards of Care
Emergency & Inpatient Pediatric Medicine
Hospital & Multi-Site System Administration
Medical Staff Credentialing & Supervision
Healthcare Compliance (HEDIS, NCQA, HRSA, FTCA)
HR Processes & Clinical Oversight
Value-Based Care & Quality Metrics
...
View Full Profile
Paul Neumann
Industrial Engineering and OSHA Safety Expert
Katy, Texas
Mechanical Engineering, Oil and Gas
-
Industrial Plants, Refinery, Material Handling, Workplace Safety, LOTO, Forklifts scissor lifts manlifts, Forensic Engineering, Off Road Vehicles (OHV), Warehouse, Accident, construction, commercial, process safety management (PSM), machinery, vessels tanks pumps, Contractor, electrical instrumentation, OSHA, FMEA, failure analysis
20 plus years of practical, technical, academic, and operational experience in engineering applications, industrial plant safety, workplace safety, and construction worksite safety.
Principal Consulting Engineer: Consulting with law firms, corporations, and risk managers as an expert witness, conducting investigations and providing deposition, and trial testimony. Analysis of workplace safety claims in Plants, refineries, construction and industrial environments, including industrial plant safety, workplace safety, construction worksite safety, process safety management, and engineering technical specifications. Perform incident site and equipment inspections, documenting incident scenes/sites (including rapid response), perform compliance audits regarding applicability and/or compliance with OSHA, API, ASTM, ASME, ANSI, NFPA, State and Federal statutes, and other applicable standards of care within the industry, the standards of care within the workplace safety, equipment, inspect...
View Full Profile
Brian J Brackensick, MSEE, PE, CFEI, CVFI
Forensic Electrical Engineer and Fire Investigator
Dreiym Engineering PLLC
Coldspring, Texas
Electrical Engineering, Fire
-
Electrical Fires, Appliance Failures, Electrical Relays, Electrocution, Shock, Pools, Electrical Explosions, Corrosion, VFD, Variable Frequency Drives, OSHA, Fire Investigation, X-Ray, Lightning Stike, evidence storage, Subpart S, NFPA 70E, National Electric Code, Vehicle Fire
I am a licensed Professional Engineer and Principal Electrical Engineer at Dreiym Engineering PLLC, specializing in forensic electrical investigations, failure analysis, and corrosion control. I provide expert consulting and testimony in cases involving electrical design, code compliance, industrial safety, and accident reconstruction. My work spans residential, commercial, and industrial facilities, including oil and gas, chemical processing, renewable energy, and nuclear installations.
I hold a Master of Science and a Bachelor of Science in Electrical Engineering (with a minor in Mathematics) from Washington State University. I am licensed as a Professional Engineer in multiple states, including Texas (PE #116640), and can pursue licensure in additional states as needed. I also hold certifications as a Certified Fire and Explosion Investigator (CFEI), Certified Vehicle Fire Investigator (CVFI), and CP3 Certified.
My expertise includes electrical failure analysis, arc flash hazar...
View Full Profile
Dustin Hickey, CSP, CRSP, CMIOSH, CMQ/OE
OSHA/Workplace Safety & Premises Liability Expert
LegacyMark Safety Consulting (Texas & Nationwide)
Houston, Texas
OSHA, Safety
-
Construction Safety, Industrial Safety, Confined Space, Slips/Trips, Lockout/Tagout, Machine Guarding, Trenching/Excavation, Scaffolding, Cranes & Rigging, Forklift, Workplace Safety, Aerial Lifts, Amputations, Material Handling, Electrocution, Ladder Safety, OSHA, Construction Accident, Warehouse Safety, Fall Protection
Board-certified and chartered safety & health executive and consultant, holding designations in the United States (CSP), Canada (CRSP), and the United Kingdom (CMIOSH). 20+ years of relevant work experience from field to executive leadership followed by safety consulting and safety expert witness work. Expert in OSHA 29 CFR 1910/1926 interpretation, compliance auditing, and safety management systems.
— CERTIFICATIONS —
· Certified Safety Professional (CSP)
Board of Certified Safety Professionals, United States
· Canadian Registered Safety Professional (CRSP)
Board of Canadian Registered Safety Professionals, Canada
· Chartered Member of IOSH (CMIOSH)
Institution of Occupational Safety and Health, United Kingdom
— EXPERTISE —
· Construction Safety
· Manufacturing Safety
· Industrial Safety
· OSHA Compliance
· Workplace Safety & Health
· Premises Liability
· Confined Spaces
· Fall Protection, Elevated Work
· Lockout/Tagout (Control of Hazardo...
View Full Profile
Andrew McKewen, CSHO
Service Safety
La Porte, Texas
OSHA, Safety
-
construction safety, accident investigation, safety training, OSHA disputes, job-site audits, fall protection, stairways and ladders, OSHA authorized trainer, employee rights, employer requirements, documentation, safety policies, OSHA inspections, scaffolds, boom lift, scissor lift, forklift, PPE
Mr. McKewen has over 14 years of occupational safety and health experience within the construction industry. Over the past 12 years he has been in a senior management position within several construction builders and safety consulting companies.
The following detail the and services provided to clients and employers;
Accident Investigation
Thorough, detailed and efficient investigations of accidents, ranging from property damage to construction fatalities. Breaking down everything from company policy to human behavior to find the root cause of the accident.
OSHA citation disputes
Research the standards which were cited as being in violation, find OSHA Letters of Interpretation, take into account job-site conditions, company policy, training and human behaviors; then meet with OSHA in an informal conference to eliminate the citation.
Job-site audits
Inspect job-sites, observe employees’ activities. Inspect tool and equipment for safe and proper use and condition, engage with empl...
View Full Profile
Gregory G. Zigulis, MS, BSCE, MBA, CIH, CSP
Construction/Multiemployer Safety - Certified CSP
Sixth Sense Safety Solutions
Texas
OSHA, Safety
-
multi-employer worksites, OSHA standards, safety & health obligations, serious and fatal injury prevention, contractor safety, OSHA citation policy, construction safety programs, ladder safety, toxic exposures, equipment-machine accidents, workplace falls, site inspections, forklifts, mobile elevated work platforms
40 years of occupational safety, health (including industrial hygiene), and environmental management experience within several industries. This includes roles as an Air Force Bioenvironmental Engineering officer (final rank of Captain, with industrial hygiene and environmental responsibilities), regional Occupational Health and Safety (OHS) management for a hazardous waste cleanup company, OHS management for a Prime Contractor to the Department of Energy (Oak Ridge, TN), construction safety and construction fatality research for the University of Tennessee under contract to the Department of Labor/Occupational Safety and Health Administration (OSHA), OHS management for a consumable dental supplies and metals related manufacturing/machining company, OHS management for an international gas engine manufacturer within a global automotive manufacturer, regional environmental, health and safety (EHS) management and global safety team member for a Tier 1 auto parts manufacturer, regulatory...
View Full Profile
Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM
Physician and Certified Industrial Hygienist
Center for Occupational and Environmental Health
Texas
Occupational Medicine, Industrial Hygiene
-
Toxicology, Mold, Indoor Air, OSHA, metals, chromium, lead, mercury, ethylene oxide, ethylene dibromide, chemical exposure, CIH, Workers Compensation, Firefighter, arsenic, Police Officer, Deputy Sheriff, Disability Evaluation, toxic tort, CDL
I bring the medical background of being both a board certified occupational medicine physician as well as being a Certified Industrial Hygienist to your issue. I have experience in large chemical exposure (toxic tort) cases involving multiple claimants as well as indoor air quality litigation. I have evaluated indoor air quality issues from the perspectives of both an occupational medicine physician regarding symptoms and medical testing, as well as a Certified Industrial Hygienist regarding air quality sampling of occupied structures.
My attributes include the following: Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified Physician in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM) and the International Academy of Independent Medical Examiners (FIAIME). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP)....
View Full Profile
Marco Britton, MD, MPH, CMLE
Occupational Medicine, IMEs & Life Care Plans
Insight Expert Solutions
Arlington, Texas
Occupational Medicine, Independent Medical Examinations
-
Occupational Medicine, IME, Life Care Planning, Disability, Legal Medicine, Noise, Cadmium, Chromium, Lead, Asbestos, Blood Borne Pathogen, Silica, Heat, Amputations, Respirator, OSHA, Public Health, Workers' Compensation, Impairment Evaluation, Heavy Metals
I am a board-certified physician expert in the field of Occupational & Environmental Medicine (OEM). I have nearly 12 years of experience in OEM and workers' compensation. I also am a certified medicolegal evaluator (CMLE).
My expertise includes workplace and personal injury evaluation and management (musculoskeletal injuries, eye injuries, lacerations, etc.) and hazardous exposure evaluation and management (heavy metals, asbestos, chemicals, blood borne pathogens, noise, heat and more), I also evaluate and give opinions on causation, extent of injury, maximum medical improvement, impairment, disability and ability to return to work.
I am trained in the utilization of the following regulatory standards: Occupational Safety and Health Administration (OSHA), American National Standards Institute (ANSI), Agency for Toxic Substances and Disease Registry (ATSDR) and more. I am also experienced in using the following evidence-based resources: Official Disability Guidelines (ODG), MDG...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Texas
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Amin Terouhid, Ph.D., PE, PMP, CFE
Scheduling, defect, safety, damages,& fraud expert
Adroit Consultants, LLC
Texas
Construction Defects, OSHA
-
Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, personal injury, standard of care, fraud, construction inspection, loss of productivity, critical path method (CPM), OSHA, damages expert, damages analysis, trip and fall, CPM, scheduling, Delay
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, construction fraud, defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims.
Served numerous times as an expert witness in trial, testimony, and deposition.
Licenses
• Examined and certified as a Professional Engineer (P.E.)
• Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE)
• Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP)
• Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and S...
View Full Profile
Bryan Netherland, MS, MBA, CSP, CSHO, ARM
Safety Expert Witness-OSHA, LOTO, Machine Guarding
Seek Safety Consulting
Austin, Texas
Safety, OSHA
-
Risk Management, Root Cause Analysis, Lock Out Tag Out, LOTO, Machine Guarding, Forklift, Ergonomics, Amputation, Human Factors, Laceration, Accident Investigation, Emergency Response, Industrial Manufacturing Safety, Fall Protection, Workplace Injuries, Robotics, Automation
Bryan S. Netherland, MS, MBA, CSP, CSHO, is a trained expert witness specializing in OSHA compliance, workplace safety, and accident investigation. He brings over 15 years of leadership experience in Environmental Health & Safety across Fortune 500 and global manufacturing companies, including Amazon, Berry Global, and Aurora Material Solutions. Mr. Netherland has directed enterprise-level OSHA compliance strategies and conducted hundreds of incident investigations.
He holds dual graduate degrees, a Master of Science in Occupational Safety & Health and an MBA in Sustainable Business, and is a Certified Safety Professional (CSP) and Certified Safety & Health Official (CSHO). His areas of expertise include high-hazard program management (Lockout/Tagout, confined space, machine guarding, arc flash/NFPA 70E, respiratory protection, powered industrial trucks), policy creation, risk assessment, safety management systems, and organizational safety culture.
In addition, Mr. Netherland ser...
View Full Profile
John T Whitty, P.E.
Fall Protection & Site Safety Expert for 30+ yrs
Ellis Fall Safety Solutions (Safety & Litigation Support Services LLC)
MANAKIN SABOT, Virginia
Slip Trip & Fall, Safety
-
Falls, Fall Protection, Fall Protection Product Liability, Falling Objects, OSHA 1910, Scaffolds, Skylights, Site Safety, New York Labor Law, OSHA 1926, ANSI A10, ANSI A14.3, ANSI Z359, OSHA, ANSI, Ladder Safety, Skylights, tree stand safety
Ellis Fall Safety Solutions (Safety & Litigation Support Services LLC) has over 50+ years of experience in providing expert witness services in the analysis and evaluation of falls, falling objects, and general industry & construction site safety.
Mr. Whitty is a licensed professional engineer with over 30 years of experience in manufacturing and industry. He is an active member of the ASSP (American Society of Safety Professionals) and is also a member of the ANSI Z359 National Committee on Fall protection, as well as the ANSI A10 National Committee for the protection of workers during construction and demolition operations.
He is well versed in fall protection, falling objects, root cause, product liability (fall protection products), premise liability and construction & general industry site safety.
Some examples of specialization regarding safety and multiple case experiences include: (not all encompassing but representative)
- Root cause analysis
- Premise Liability
- O...
View Full Profile
Tara L Pase
Bramel Engineering, LLC
Virginia
Structural Engineering, Civil Engineering
-
Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis
Civil/Structural Engineering
Construction Defects
Building Codes
OSHA
Failure Analysis
Strength of Materials
Concrete/Steel/Wood/Masonry Design
Concrete/Steel/Wood/Masonry Analysis
Seismic Design and Analysis
Wind Design and Analysis
Foundations and Retaining Structures
Grading and Soil Properties
Field Repair Designs
Stormwater Management
Component/Connection Design and Analysis
Construction Cost Estimates
Building Envelope (Moisture Barriers)
Construction Management
Registered Professional Engineer, State of New York, License No.087752
Registered Professional Engineer, State of Maryland, License No.42640
Registered Professional Engineer, Commonwealth of Virginia, License No.051210
Registered Professional Engineer, State of New Jersey, License No.24GE05239300
View Full Profile
Deborah E Dickerson, PhD CIH CSP
Product warnings, labels, instructions
Dickerson Consulting LLC
Blacksburg, Virginia
Products Liability, Warnings & Labels
-
Injury, Illness, Product Liability, Premises Liability, Industrial Accidents, Warnings and Labels, OSHA, Worker's Compensation, Human Factors, Safe Equipment Design, Respiratory Protection, Respiratory Illness, Chemical Exposures, Dust, Asbestos, Silica, Lead, Temperature Extremes, Laboratory Safety
Expertise in: product design and safety; design of product warnings and labels; chemical exposure risks, analysis, and health outcomes; industrial system design, safety, and training.
I am an associate professor of safety engineering and human factors engineering and the Director of the Product and System Safety Laboratory in the Grado Department of Industrial and Systems Engineering at Virginia Tech in Blacksburg, VA.
I hold MS and PhD degrees in safety engineering and the certified safety professional (CSP), certified industrial hygienist (CIH), and certified hazardous materials manager (CHMM) credentials.
I have over 30 years of experience in the fields of industrial hygiene and safety engineering: conducting investigations and designing safe work systems. I led a compliance organization responsible for conducting investigations and ensuring compliance with safety and health standards (OSHA and EPA).
I have 21 years of university teaching experience and have taugh...
View Full Profile
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
West Virginia
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
View Full Profile
Elbert Sorrell
Health and Safety Expert - Retired Professor
RISK CONTROL/SAFETY CONSULTING
MENOMONIE, Wisconsin
Safety, OSHA
-
ISO Safety Auditing, Safety Program Development, Construction Risk Management, IISO Environmental Auditing , Risk assessment/Risk Control , Safety Training Development/Evaluation , Risk Management , Incident Investigation , Safety Process Improvement, Construction Safety , Safety Regulatory Compliance, Safety Related Res
Elbert Sorrell is a Certified Safety Professional (CSP) with extensive experience in occupational safety and health/risk control. Dr. Sorrell was granted Professor Emeritus status in the M.S in Risk Control/Safety Management Program at the University of Wisconsin-Stout after 28 years of service when he retired in January 2016. He is well versed in the multi-disciplinary areas of occupational safety and health (management system development and evaluation, program/policy development and implementation, program monitoring and management, regulatory compliance, risk/hazard assessment and safety training and evaluation) with a particular interest in facilitating the integration of safety, and health and environment processes into existing management systems.
Upon retiring from academia Dr. Sorrell committed himself to providing 3rd party certification audits as well as providing safety consultation and training to business and industry focusing on ISO 9001, ISO 14001, ISO 45001 and RC ...
View Full Profile
Timothy Kobernat, CSP RET
OSHA Expert - Former Area Director
OSHAware LLC
Eau Claire, Wisconsin
OSHA, Safety
-
OSHA, Fall Protection, Confined Space, Trenches, OSHA Standards, Paper Mill, Excavating, Lockout/Tagout, Cranes & Forklifts, Grain Elevators, Multi-Employer Worksites, Material Handling
With 32 years experience as an OSHA Area Director and Safety Compliance Officer, as well as an additional 17 years in various related safety and heath related work, I have a broad range of experience in OSHA & safety related matters.
In the approximately 14 years I spent as a compliance safety and health officer, I conducted approximately 1500 site inspections, roughly half of which were related to construction standards enforcement. During these inspections, I evaluated safety and health conditions and hazards, recommended abatement methods, and determined exposure and standard application. While serving approximately 16 years as district supervisor and area director for OSHA, a major part of my duties was to review virtually all files that came through our office, certifying their legal sufficiency for citations. In addition to my enforcement efforts with OSHA, I also conducted numerous construction safety seminars, helping companies to come into full compliance wit...
You can also find OSHA Expert Witnesses in:
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Kentucky, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, North Carolina, Ohio, Pennsylvania, South Carolina, Texas, Virginia, and Wisconsin