Root Cause Analysis Expert Witnesses
Root cause analysis expert witnesses and consultants listed here may be able to form expert opinions, draft expert witness reports, provide expert witness testimony at deposition and/or trial as or serve as consulting (non-testifying) experts on root cause analysis. The root cause analysis expert witness listings on this page are typically from fields/areas of expertise such as: Cardiothoracic Surgery, Chemical Engineering, Chemistry & Chemicals, Energy, Legal Nurse Consulting, Maritime, Mechanical Engineering, Oil and Gas, OSHA, Pediatric Cardiothoracic Surgery, Petroleum Engineering, Radiology, and Safety.
View Full Profile
Alan R. Hugenot
Alan Ross Hugenot Inc.
San Francisco, California
Maritime
-
Maritime Casualties, Personal Injury, Root Cause Analysis, Ship-handling, Sailing yachts, Motor yachts, Charter contracts & disputes, Sail Racing Rules, Jones Act, Dis-masting, Capsizing, Sinking, Collisions, Yacht Design & Engineering, Boatyard repairs, Insurance disputes, Cruise ships
Merchant Marine Officer, Master Mariner, Near Coastal Inspected Passenger Vessels, Steam Motor & Sail for 34 years. STCW 95 and Radar Observer Unlimited, Navigation, Safety Regulations, Shipboard Safety/Security, Deck Seamanship, Rules of the Road, Experienced Towing & Rescue of Yachts and Small Craft. Maritime Smuggling.
Naval Architect-Marine Engineer, Full Member SNAME 40 years, Expert on Diesel failure analysis, Experienced Engine Rebuilder, Engine replacements, Electrical Propulsion Controllers, Solar Panels & controllers, High voltage storage batteries, Diesel generators & Inverters, 12VDC, through 96VDC. 125VAC & 240 VAC. Expert on all shipboard mechanical systems, fuel oil, lube oil, fire protection, all piping and pumping, HVAC,
• Chairman, SNAME Motor Craft & Service Craft Panel (SC-4) Small Craft Technical & Research Committee (Since 2006).
• Principal National Fire Protection Association-NFPA Motor Craft Committee (2011),
• Member of five American Boat and Yacht Coun...
View Full Profile
Tara Parhizkar, B.S., M.S., Ph.D., P.E.
Accident Investigation – Energy Infrastructures
Los Angeles, California
Energy, Mechanical Engineering
-
Power Grid, Energy Infrastructures, Marine Industry, Accident Investigation, Power Tools, Patent Litigation, Construction Safety, Utilities, Oil & Gas, Wildfire, Public Safety, Root Cause Analysis, Failure, Accident, Energy, Climate Change, Renewable Energy, Disaster, Catastrophic Injury, Safety
Dr. Tarannom Parhizkar, Ph.D., P.E., is a distinguished expert in power grids and the oil & gas industry, with over 16 years of professional experience. She is an Adjunct Professor at UCLA and a trusted authority in accident investigation, failure mode and effects analysis (FMEA), and common cause failure assessment, providing attorneys with clear, defensible technical opinions.
Her litigation and consulting work focuses on accident reconstruction, root cause analysis, and patent disputes. She has supported cases involving energy infrastructure accidents, pipeline integrity, combustion systems, equipment failures, and environmental exposures. Known for her meticulous methods and integrity, Dr. Parhizkar offers objective, reliable insights that help clarify complex technical issues in court.
Dr. Parhizkar has authored a book, multiple book chapters, and more than 30 peer-reviewed journal publications. She is also an active academic contributor, serving as Adjunct Professor at UCLA,...
View Full Profile
Jonathan (Jay) L Beam, B.S, M.S., CSP
Oilfield & Industrial Safety Eng. | Catastrophic
Inertia Consulting Group
Louisiana
Safety, Oil and Gas
-
Oilfield Accident expert, Workplace safety expert, Accident reconstruction, Root Cause Analysis, Technical evidence review, Process safety expert, Safety engineering, Forensic engineering, Production engineering, OSHA compliance expert, Accident investigations, Industrial accident expert, Mechanical Failures
With over 20 years of experience in the oil and gas industry, Jonathan Beam is a seasoned Safety and Forensic Engineer recognized for technical depth, investigative rigor, and strategic insight in complex industrial cases. His multidisciplinary background, combining a B.S. in Biology, Minor in Chemistry, and an M.S. in Mechanical Engineering, enables him to bridge the gap between process safety, chemical behavior, and mechanical system performance across upstream, midstream, and downstream operations.
Throughout his career, Jay has led and supported accident investigations, OSHA and regulatory inquiries, and root cause analyses involving process safety incidents, mechanical failures, and catastrophic injuries. His analytical and technical expertise extends to regulatory compliance reviews, engineering assessments, and system-level failure modeling.
In addition to his field and technical experience, Jay provides specialized litigation and expert witness support to law firms, insura...
View Full Profile
Jonathan (Jay) L Beam, B.S, M.S., CSP
Oilfield & Industrial Safety Eng. | Catastrophic
Inertia Consulting Group
New Mexico
Safety, Oil and Gas
-
Oilfield Accident expert, Workplace safety expert, Accident reconstruction, Root Cause Analysis, Technical evidence review, Process safety expert, Safety engineering, Forensic engineering, Production engineering, OSHA compliance expert, Accident investigations, Industrial accident expert, Mechanical Failures
With over 20 years of experience in the oil and gas industry, Jonathan Beam is a seasoned Safety and Forensic Engineer recognized for technical depth, investigative rigor, and strategic insight in complex industrial cases. His multidisciplinary background, combining a B.S. in Biology, Minor in Chemistry, and an M.S. in Mechanical Engineering, enables him to bridge the gap between process safety, chemical behavior, and mechanical system performance across upstream, midstream, and downstream operations.
Throughout his career, Jay has led and supported accident investigations, OSHA and regulatory inquiries, and root cause analyses involving process safety incidents, mechanical failures, and catastrophic injuries. His analytical and technical expertise extends to regulatory compliance reviews, engineering assessments, and system-level failure modeling.
In addition to his field and technical experience, Jay provides specialized litigation and expert witness support to law firms, insura...
View Full Profile
Caroline A Strazis
Expert Causality Analyst; Hospital Sentinel Harm
CA Strazis Clinical Legal Consulting, PLLC
Durham, North Carolina
Radiology, Legal Nurse Consulting
-
Root Cause Analysis, Clinical Decisions, Human Factors, Healthcare Systems/Operations, Unexpected Death, Diagnostic Error/Delay, VTE Prophylaxis, Fall with Injury, Central Venous/Vascular Access, Cardiac/Physiologic Monitoring, Moderate Sedation, Procedural Error/Complication, Resuscitation, Failure to Escalate/Rescue
Caroline A. Strazis, MSN, RN, CNL, CPPS
Masters in Science of Nursing, Healthcare Systems (MSN) - University of North Carolina at Chapel Hill
Registered Nurse (RN) - North Carolina Board of Nursing
Clinical Nurse Leader (CNL) - American Association of Colleges of Nursing
Certified Professional of Patient Safety (CPPS) - Institute for Healthcare Improvement
CA Strazis Clinical Legal Consulting, PLLC
I am a clinical-legal consultant and registered nurse with 12 years of experience spanning high-acuity clinical work and investigative experience. I specialize end-to-end management of complex investigations with speed and precision and am comfortable delivering highly visible findings under sustained executive, legal, and regulatory scrutiny. I am formally trained and certified to perform full causal analysis on events ranging from geriatric falls with injury to catastrophic harm and unexpected death.
Root cause analysis is a core discipline within systems science and is setting-agno...
View Full Profile
Jonathan (Jay) L Beam, B.S, M.S., CSP
Oilfield & Industrial Safety Eng. | Catastrophic
Inertia Consulting Group
North Dakota
Safety, Oil and Gas
-
Oilfield Accident expert, Workplace safety expert, Accident reconstruction, Root Cause Analysis, Technical evidence review, Process safety expert, Safety engineering, Forensic engineering, Production engineering, OSHA compliance expert, Accident investigations, Industrial accident expert, Mechanical Failures
With over 20 years of experience in the oil and gas industry, Jonathan Beam is a seasoned Safety and Forensic Engineer recognized for technical depth, investigative rigor, and strategic insight in complex industrial cases. His multidisciplinary background, combining a B.S. in Biology, Minor in Chemistry, and an M.S. in Mechanical Engineering, enables him to bridge the gap between process safety, chemical behavior, and mechanical system performance across upstream, midstream, and downstream operations.
Throughout his career, Jay has led and supported accident investigations, OSHA and regulatory inquiries, and root cause analyses involving process safety incidents, mechanical failures, and catastrophic injuries. His analytical and technical expertise extends to regulatory compliance reviews, engineering assessments, and system-level failure modeling.
In addition to his field and technical experience, Jay provides specialized litigation and expert witness support to law firms, insura...
View Full Profile
Jonathan (Jay) L Beam, B.S, M.S., CSP
Oilfield & Industrial Safety Eng. | Catastrophic
Inertia Consulting Group
Broken Arrow, Oklahoma
Safety, Oil and Gas
-
Oilfield Accident expert, Workplace safety expert, Accident reconstruction, Root Cause Analysis, Technical evidence review, Process safety expert, Safety engineering, Forensic engineering, Production engineering, OSHA compliance expert, Accident investigations, Industrial accident expert, Mechanical Failures
With over 20 years of experience in the oil and gas industry, Jonathan Beam is a seasoned Safety and Forensic Engineer recognized for technical depth, investigative rigor, and strategic insight in complex industrial cases. His multidisciplinary background, combining a B.S. in Biology, Minor in Chemistry, and an M.S. in Mechanical Engineering, enables him to bridge the gap between process safety, chemical behavior, and mechanical system performance across upstream, midstream, and downstream operations.
Throughout his career, Jay has led and supported accident investigations, OSHA and regulatory inquiries, and root cause analyses involving process safety incidents, mechanical failures, and catastrophic injuries. His analytical and technical expertise extends to regulatory compliance reviews, engineering assessments, and system-level failure modeling.
In addition to his field and technical experience, Jay provides specialized litigation and expert witness support to law firms, insura...
View Full Profile
Bryan Netherland, MS, MBA, CSP, CSHO, ARM
Safety Expert Witness-OSHA, LOTO, Machine Guarding
Seek Safety Consulting
Austin, Texas
Safety, OSHA
-
Risk Management, Root Cause Analysis, Lock Out Tag Out, LOTO, Machine Guarding, Forklift, Ergonomics, Amputation, Human Factors, Laceration, Accident Investigation, Emergency Response, Industrial Manufacturing Safety, Fall Protection, Workplace Injuries, Robotics, Automation
Bryan S. Netherland, MS, MBA, CSP, CSHO, is a trained expert witness specializing in OSHA compliance, workplace safety, and accident investigation. He brings over 15 years of leadership experience in Environmental Health & Safety across Fortune 500 and global manufacturing companies, including Amazon, Berry Global, and Aurora Material Solutions. Mr. Netherland has directed enterprise-level OSHA compliance strategies and conducted hundreds of incident investigations.
He holds dual graduate degrees, a Master of Science in Occupational Safety & Health and an MBA in Sustainable Business, and is a Certified Safety Professional (CSP) and Certified Safety & Health Official (CSHO). His areas of expertise include high-hazard program management (Lockout/Tagout, confined space, machine guarding, arc flash/NFPA 70E, respiratory protection, powered industrial trucks), policy creation, risk assessment, safety management systems, and organizational safety culture.
In addition, Mr. Netherland ser...
View Full Profile
Jonathan (Jay) L Beam, B.S, M.S., CSP
Oilfield & Industrial Safety Eng. | Catastrophic
Inertia Consulting Group
Texas
Safety, Oil and Gas
-
Oilfield Accident expert, Workplace safety expert, Accident reconstruction, Root Cause Analysis, Technical evidence review, Process safety expert, Safety engineering, Forensic engineering, Production engineering, OSHA compliance expert, Accident investigations, Industrial accident expert, Mechanical Failures
With over 20 years of experience in the oil and gas industry, Jonathan Beam is a seasoned Safety and Forensic Engineer recognized for technical depth, investigative rigor, and strategic insight in complex industrial cases. His multidisciplinary background, combining a B.S. in Biology, Minor in Chemistry, and an M.S. in Mechanical Engineering, enables him to bridge the gap between process safety, chemical behavior, and mechanical system performance across upstream, midstream, and downstream operations.
Throughout his career, Jay has led and supported accident investigations, OSHA and regulatory inquiries, and root cause analyses involving process safety incidents, mechanical failures, and catastrophic injuries. His analytical and technical expertise extends to regulatory compliance reviews, engineering assessments, and system-level failure modeling.
In addition to his field and technical experience, Jay provides specialized litigation and expert witness support to law firms, insura...
View Full Profile
Michael J Heniff, Jr
Experienced Chemical Process Engineer
Heniff Process Services LLC
Houston, Texas
Chemical Engineering, Chemistry & Chemicals
-
Hazardous Chemicals, Process Safety, Personal Safety, Monomers, Polymer, Chemical Plants, Styrene, Chemicals, Flammability, Reactive Chemicals, Flammable, Dust, Process Engineer, HAZOP, Petrochemical, Incident Investigation, Root Cause Analysis, Hydrogen Cyanide, Process Design, Project Management
SUMMARY
• Chemical Engineer with over 30 years of experience primarily in process engineering/ process development that is currently working part-time or short duration roles.
• Very strong background in monomers and polymers chemistries and processes.
• Ability to embrace new process technologies and new chemistries quickly.
• High achiever, very motivated, high energy, quick learner, data driven, and results oriented.
• Strong process safety background (with experience at multiple OSHA Star plants) with active involvement in process hazard analyses (HAZOP and LOPA), management of change (MOC), safety instrumented systems, and PSM auditing.
• Proficient with Aspen Plus (including Aspen Polymers), HTRI, Minitab, OSI PI, and Aspen Process Explorer.
PROFESSIONAL EXPERIENCE
Heniff Process Services LLC, Houston, TX, November 2024 – Present
Proprietor and Senior Principal Process Engineer
LyondellBasell, Channelview, TX, September 2023 to November 2024
Global Consulting Process...
View Full Profile
Harold E. McGowen, III
Petroleum Engineering/Oil & Gas Operations Expert
Navidad Forensics
Bullard, Texas
Petroleum Engineering, Oil and Gas
-
Personal Injury, Securities Fraud, Hydraulic Fracturing, Patent, Operations Failure, Equipment Failure, Safety in Design, Environmental, Drilling Operations, Completions Operations, Horizontal Drilling, Trade Secret, Oilfield Operations, Reserves Projections, Safety Engineering, Machine Design, Root Cause Analysis, Blowout , Explosion
Harold E. McGowen, III is a Registered Professional Engineer with over 40 years of experience in the upstream oil and gas industry. His business background is robust, having started and been a part of building and selling several companies including working with Private Equity. His bent and background is highly technical, and he has worked as an engineer and manager for several organizations, giving him a broad view of the industry. He has been involved in all steps of the oil and gas exploration and production process.
Harold has provided expert witness services to assist in patent litigation and inter partes reviews related to down-hole tools, materials/chemicals, horizontal drilling, hydraulic fracturing, and other oilfield-related technologies. Harold has also provided expert witness services related to hydraulic fracturing "crashing", equipment failures, and operational negligence.
View Full Profile
Sophia C Bailey, MSN,BSN,RN,CNOR
Congenital Heart Surgery (Pediatric & Adults)
Pediatric Cardiac Surgery Consultants
Houston, Texas
Pediatric Cardiothoracic Surgery, Cardiothoracic Surgery
-
Standards of care, Chart review, Ventricular assist devices, Root cause analysis, Patient safety, OR Nursing standards, Retained surgical items, Adult congenital surgery, Operating room safety, Pediatric ECMO, Wrong-site surgery, Chest tube management, Complex congenital surgery, Heart Transplants, Sentinel events
Registered nurse with more than 27 years nursing experience, including 19 years specializing in pediatric, neonatal and adult congenital heart surgery within the cardiac operating room (CVOR). Emphasis in practice has focuses on high acuity, high risk pediatric and adult cardiac cases, including complex congenital repairs and mechanical circulatory support.
Ms. Bailey has extensive expertise in perioperative standards of care related to pediatric and adult congenital heart surgery, with particular emphasis on ECMO cannulation and management, intraoperative safety, surgical counts, and the prevention and identification of intentionally retained foreign objects (IRFOs).
In addition, she has led and participated in patient safety investigations, near miss reviews, and root cause analyses (RCA), and has actively involved in the development, implementation, and reinforcement of perioperative policies and procedures.
Ms. Bailey's work includes medical record review, timeline development, ...
View Full Profile
Jonathan (Jay) L Beam, B.S, M.S., CSP
Oilfield & Industrial Safety Eng. | Catastrophic
Inertia Consulting Group
West Virginia
Safety, Oil and Gas
-
Oilfield Accident expert, Workplace safety expert, Accident reconstruction, Root Cause Analysis, Technical evidence review, Process safety expert, Safety engineering, Forensic engineering, Production engineering, OSHA compliance expert, Accident investigations, Industrial accident expert, Mechanical Failures
With over 20 years of experience in the oil and gas industry, Jonathan Beam is a seasoned Safety and Forensic Engineer recognized for technical depth, investigative rigor, and strategic insight in complex industrial cases. His multidisciplinary background, combining a B.S. in Biology, Minor in Chemistry, and an M.S. in Mechanical Engineering, enables him to bridge the gap between process safety, chemical behavior, and mechanical system performance across upstream, midstream, and downstream operations.
Throughout his career, Jay has led and supported accident investigations, OSHA and regulatory inquiries, and root cause analyses involving process safety incidents, mechanical failures, and catastrophic injuries. His analytical and technical expertise extends to regulatory compliance reviews, engineering assessments, and system-level failure modeling.
In addition to his field and technical experience, Jay provides specialized litigation and expert witness support to law firms, insura...