Safety Expert Witnesses in Utah

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

Stanford R. Brown, B.Sc., CSP, CSHP, CRSP, CHSC, has over 30 years of experience managing safety and health for various projects. He has been involved with multiple construction safety/OSHA cases as an expert witness. A sampling of the expert witness cases he has been involved with include: • Workplace injury at refinery construction project. • Worker fatally electrocuted during a paving incident. • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/T...

OSHA, Safety - Construction Safety, Industrial Accidents, Confined Spaces, Slips / Trips / Falls, Lockout/Tagout, Machine Guarding, Trenching & Excavation, Scaffolding, Cranes & Rigging, Forklifts, Workplace Safety, Aerial Lift, Amputations, Material Handling, Electrocution, Ladders, Struck By, Caught Between

Overview: Board-certified and chartered safety & health executive and consultant, holding designations in the United States (CSP), Canada (CRSP), and the United Kingdom (CMIOSH). 22 years of relevant work experience, beginning with 5 years of various craft positions followed by 17 years’ experience in occupational safety and health roles. Certifications: - Certified Safety Professional (CSP) Board of Certified Safety Professionals, United States - Canadian Registered Safety Professional (CRSP) Board of Canadian Registered Safety Professionals, Canada - Chartered Member of IOSH (CMIOSH) Institution of Occupational Safety and Health, United Kingdom - (Call or email for full CV) Expertise: Expert in interpretation, application, and compliance auditing of safety and health regulations, including but not limited to OSHA regulations for Construction (29 CFR 1926) and General Industry (29 CFR 1910). - Construction Safety - Manufacturing Safety - Industrial...

OSHA, Construction - Struck by Equipment, back over, Fall Protection, Multi-Emplyer, Fall Prevention, slip trip & fall, aerial lift, crush, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift

Over 30 years as a safety executive and OSHA compliance manager, trainer, advisor, and leader on major construction projects throughout the USA. Expert at applying OSH Act of 1970 standards, regulations, policies, and Letter of Interpretation. Experience includes over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations. Expert at incident investigation, accident reconstruction, and injury management and investigation. Extensive experience and expertise in MUTCD Traffic Controls and rules. AREAS OF EXPERTISES INCLUDES: • Liability Assessment & Contractor Duty of Care • Accident Investigation & Root Cause • Aerial Lifts, MEWP • Construction Safety/Accidents • COVID Safety & Pandemic Management • Crane Safety, Critical Pick Planning, & Rigging • Disaster & Emergency Management • Dive/Underwater Operations • EM-385 U.S. Army Corps of Engineers • Excavation, Trenching, & Soil Mechanics • Slip, Trip, Falls, Stirs & Floor Safety Certi...

Provo, Utah

Chemical Engineering, Safety - Petroleum Refining, Heterogenous Catalysis, Process Safety Management, Risk Management, Hazard Analysis, Fluid Catalytic Cracking, Oil and Gas, Energy, Catalyst Deactivation

Professional Engineer registered in Texas. Eight years' petroleum refining experience in process design, economics, fluid catalytic cracking operation and supervision, hydrodesulfurization and catalytic reforming supervision, technical and operations supervision. Prior expert witness in cases involving chemical engineering safety (heat transfer and pressure relief) and attempted arson. Twenty years' experience teaching undergraduate and graduate chemical engineering courses. 61 peer-reviewed journal publications in areas of heterogenous catalysis, catalyst deactivation, energy, hydrogen generation and purification, and CO2 capture, Fellow of the American Institute of Chemical Engineers.

RIVERTON, Utah

Safety, OSHA - 1910 General Industry, Accident Investigation, Fall Protection, Haz-Com, Hazard Recognition, Logistics Safety, OSHA Record Keeping, OSHA Standards, Powered Industrial Truck Operations, PPE, Risk Management, Root Cause Analysis, Safety Training, Warehouse Safety, Workplace Injuries

Mr. Claverie has been doing occupational health and safety work since 2010 and has experience applying safe work practices within a broad range of industries including fire prevention, training, construction, power generation, manufacturing, DOT, and warehouse logistics. He can speak to a wide range of health and safety topics and the applicable regulatory requirements. He has a Bachelor of Science in Occupational Health and Safety and is certified through the BCSP and holds a current Certified Safety Professional certificate (CSP). He has in the past been a certified First Aid class trainer, respirator fit tester, and done industrial hygiene sampling work. He is very familiar with the OSHA 29 CFR 1910 General Industry Regulations, and also has experience with the OSHA 29 CFR 1926 Construction regulations as well. He is proficient in accident investigation, root cause analysis, OSHA standards, OSHA recordkeeping, powered industrial truck operations, warehouse safety, logistics s...

Lehi, Utah

Mechanical Engineering, Intellectual Property - Mechanical Engineer, Consumer Product, Lock, Safety, Electromechanical, Smart Device, Gun Safe, Baby, Home, Patent, Patent Infringement, Personal Injury, Engineer, Product Design

Jacob Morrise is a Consumer Product Design Expert with a Masters in Mechanical Engineering and over 15 years of experience designing products in all categories of the consumer product space including, locking devices, child safety gun safety, kitchen, home, landscape, personal care, textiles, audio/visual, cleaning, pet, tracking, smart devices, and others. He has designed hundreds of consumer and other products, which have sold on Amazon, in retail stores and online. He is listed on numerous issues and in process patents, and has worked closely with patent attorneys to get these pattens realized. Jacob has a bachelors degree in Mechanical Engineering from BYU-Idaho, graduating Magna Cum Laude and a Masters degree in Mechanical Engineering from Brigham Young University. He is skilled in among other things, the Microsoft Office Suite, SolidWorks CAD design, with over 10,000 hours of design work, as acted multiple years as a design coach for University Students working on their Capst...

Eagle Mountain, Utah

Mechanical Engineering, Safety - Certified Safety Professional, Forklift, Excavator, Boom Lift, Skid Steer Loader, Mobile Crane, Crane, Tower Crane, Aerial Lift, Bucket Truck, Safety, Warnings, Scissor Lift, Rough Terrain Forklift, Bulldozer, Front End Loader, Trailer, HAZMAT Tanker Trailer, Machinery, Saw

--Heavy Equipment Experience-- I have extensive experience with heavy equipment. I have designed aerial bucket trucks from the ground up. I have operated forklifts, skid steer loaders, scissor lifts, boom lifts, and bulldozers. I have tested heavy equipment, including failure testing fiberglass booms, pressure testing hydraulics on a large casing rotator, pressure testing hydraulic systems on aerial bucket trucks, and strength testing and fatigue testing trailer safety chains. I have analyzed various types of heavy equipment utilizing finite element analysis software. --Credentials-- I am a registered Professional Engineer, a Certified Safety Professional, and a Certified Fluid Power Hydraulic Specialist. I am also an IVES Training Group Certified Forklift Operator. I am also certified through IVES Training Group to train operators of forklifts, scissor lifts, boom lifts, and mobile elevating work platforms (MEWPs). I have training in crane safety and am a Certified Rigger -...

Alpine, Utah

Mechanical Engineering, Intellectual Property - Patents, intellectual property, aerial lift, boom lift, scissor lift, manufacturing equipment, agricultural equipment, oil and gas equipment, refuse equipment, garbage trucks, trailers, conveyors, exercise equipment, safety, consumer products, chairs, seating, Forklift, thrill ride, zip line

Experienced mechanical engineer (MS, PE) and certified safety professional (CSP) with seven issued patents. Award winning inventor. President of Alpine Engineering and Design, Inc., a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Consulted on multiple products including: forklifts, conveyors, aerial lifts, garbage trucks, trailers, exercise equipment, seating and manufacturing equipment. Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and a certified safety professional in comprehensive practice (CSP). Certified operator and trainer for forklifts, powered industrial trucks, boom lifts, scissor lifts, MEWPS, rough terrain forklifts. Approaching 20 years experience in product development, patents, safe equipment desi...