Consumer Products Expert Witnesses
Consumer products expert witnesses and consultants listed here may be able to form expert opinions, draft expert witness reports, provide expert witness testimony at deposition and/or trial as or serve as consulting (non-testifying) experts on consumer products. The consumer products expert witness listings on this page are typically from fields/areas of expertise such as: Engineering, Fire, Intellectual Property, Mechanical Engineering, Medical Devices, and Products Liability.
Daniel . Gottuk, PhD
Gottuk Engineering
California
Fire, Engineering
-
Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination.
Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...
T.Kim Parnell, PhD, PE
Parnell Expert Consulting
Sunnyvale, California
Medical Devices, Intellectual Property
-
Mechanical Engineering, Equipment & Machinery, Medical Device, Nitinol, Biomedical, Patent, IP, Consumer Products, Failure Analysis, Fracture, Fatigue, Truck Rollover, Crashworthiness, Finite Element, FEA, Reliability, Cell Phone, IVC, Composite Material, Piping
T.Kim Parnell, PhD, PE is President of Parnell Expert Consulting. Dr.Parnell holds PhD and MSME degrees in Mechanical Engineering from Stanford University, a BES from Georgia Tech, and is a registered Professional Mechanical Engineer (PE) in the State of California. Dr.Parnell is an ASME Fellow, an IEEE Life Senior Member, and a Member of NAFEMS, SAMPE, ASMI and SAE. Parnell is Past-Chair of the IEEE Santa Clara Valley Section (IEEE-SCV) (over 13,000 members) and Past-Chair/Board Member of the IEEE Consultants' Network of Silicon Valley (IEEE-CNSV).
Dr.Parnell is an experienced Expert Witness, has provided testimony in both trial and deposition, and has authored numerous expert reports, ITC and IPR declarations. He has worked extensively as an expert in medical devices, patents, product failure, product liability, and personal injury.
Dr.Parnell has been retained in medical device litigation cases that are in the news. Products include stent, stent-grafts, AAA devices, IVC F...
Daniel . Gottuk, PhD
Gottuk Engineering
Florida
Fire, Engineering
-
Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination.
Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...
Meyer R. Rosen, FAIC, FRSC, CPC, CChE, DABFET
cosmetic chemical burns; Fires & explosions
Interactive Consulting, Inc.
Bonita Springs , Florida
Products Liability, Fire
-
Fires, Explosions, chemical accidents, Chemical burns, Toxic exposures, chemistry, chemical engineering, consumer products, industrial products, industrial accidents, materials science, cosmetics, hair relaxers, warnings & instructions, OSHA Codes, Standards, SDS, Patent Infringement, Trade Secrets
Experienced Consulting and Testifying Forensic Litigation Expert Witness. Products Liability and Personal Injury. Plaintiff or Defense; Federal and State. Incident Reconstruction, Complex Litigation, Early case consultation, International Experience.
25 years Industrial Experience. Consumer & industrial product development. Evaluation of hazardous chemicals & safety issues; Chief Scientific Advisor and Director of Technical & Regulatory Symposia for HBA (Health & Beauty, America),
Academic Experience: Adjunct Professor Fire Science (15 years); Fire and Explosion Investigator (E-CFEI); Advanced Training (CFEI).
Affiliate member National Academy of Forensic Engineers.
National Association of Fire Investigators, International. Life Member
Member: National Fire Protection Association, American Chemical Society, American Institute of Chemical Engineers, Contributing Expert for ASTM Standards- Making Committees (American Society of Testing Materials), Peer Reviewer Professional Jou...
Daniel . Gottuk, PhD
Gottuk Engineering
Illinois
Fire, Engineering
-
Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination.
Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...
Daniel . Gottuk, PhD
Gottuk Engineering
Ellicott CIty, Maryland
Fire, Engineering
-
Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination.
Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...
Daniel . Gottuk, PhD
Gottuk Engineering
New York
Fire, Engineering
-
Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination.
Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...
Jon Washington, BSME, MBA, PMP
Engineering, Design, Manufacturing & Patent Expert
The Innovation Garage, LLC
Clinton, Ohio
Engineering, Mechanical Engineering
-
Automotive, Aerospace, Gaming, Casinos, Financial Self Service, Manufacturing, Design, Systems, Polymers, Plastics, Barriers, Security, Software, Metal Forming Processes, Patent Process, Business Process, Operations, Medical Devices, Supply Chain, Consumer Products
Jon Washington is currently Founder and Proprietor of The Innovation Garage, a company he has run since August 2012. The Innovation Garage is a consultancy that provides education, tools, technology, and expert consulting in change management for strategy, innovation, and supply chain.
The Innovation Garage works with organization leadership teams to help design strategy, build internal capability, and execute systems and solutions by providing education tools, and technology. The client base includes start up, not for profit, and globally recognized publicly traded organizations including several global fortune 500. Since founding the organization in 2012, The Innovation Garage has worked with 75+ global organizations and Mr. Washington has personally trained over 1,500 leaders and their extended internal team members.
In addition to his role at The Innovation Garage, Mr. Washington consults with organizations across many industries and sizes including start-ups, mid-market priva...
Daniel . Gottuk, PhD
Gottuk Engineering
Texas
Fire, Engineering
-
Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination.
Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...
Randall King, PhD, PE
King Professional Engineering, Inc.
DALLAS, Texas
Mechanical Engineering, Products Liability
-
Patent infringement/invalidity, products liability, machinery design, failure analysis, design defects & manufacturing defects, 15 US patents + 6 int'l patents, Oilfield, industrial & agricultural accidents, pumps & compressors, valves & piping, consumer products, mechanical equipment failures
Dr. King is a licensed professional engineer with a Ph.D. in mechanical engineering: 40+ years experience in mechanical engineering, product design, research and development of high-pressure oilfield fracturing pumps and automotive components, forensic investigation, and litigation support.
▪ Testified at 11 trials & 54 depositions
▪ 25 Patent, IPR, & PGR cases – 4 trials & 12 depositions
▪ 21 Patents
▪ Patent infringement & invalidity
▪ Products liability
▪ Design defects & manufacturing defects
▪ Failure analysis
▪ Oilfield, Industrial, Construction, & Agricultural accidents
▪ Pumps, valves, compressors, & piping
▪ Cranes, trucks, lifts
▪ Consumer products
Dr. King has served as a forensic engineer for over 20 years, testifying at 11 trials and 54 depositions in state and federal courts for both plaintiff and defense.
Dr. King has served on 25 patent cases, providing opinions on invalidity, infringement, IPR’s, PGR's, and claim construction, including l...
Nathan Macdonald, PE, CSP
Amusement Rides Fitness Equipment and Patents
Alpine Engineering & Design, Inc.
Alpine, Utah
Mechanical Engineering, Intellectual Property
-
Amusement Rides and Devices, Fitness Equipment, Patents, Intellectual Property, Forklift, Roller Coaster, Zipline, Trampoline Park, Slip and Fall, Consumer Products, Fitness Cables and Carabiners, Automation, Scissor Lift, Telehandler, Design Patents, Trade Secrets, Standards Compliance, aerial lift
Experienced mechanical engineering consultant with a Bachelor of Science in Mechanical Engineering. Lead engineer on the design and analysis of numerous products, including ziplines, exercise equipment, drop rides, slingshot rides, aerial lifts, trailers and towing equipment, automated drill pipe handling systems, and other hydraulic, pneumatic, and electronic systems and equipment. Licensed Professional Mechanical Engineer (PE) in Utah, Certified Safety Professional (CSP) in comprehensive practice. Certified Commercial Building Inspector, Licensed operator and trainer for forklifts, telehandlers, and MEWP's such as aerial lifts, scissor lifts, and boom lifts.
Familiar with reading, interpreting, and using standards in the engineering design process including, among others, ANSI, ASTM, OSHA, SAE, and ISO standards. Dedicated to high engineering standards, practice, and quality of work product. Performed accelerometer testing on various amusement rides and devices including ziplines...
David Smith, MS, MBA, PE, CSP
Product and Equipment Safety, IP and Patent Expert
Alpine Engineering and Design, Inc.
Alpine, Utah
Mechanical Engineering, Intellectual Property
-
Patents, intellectual property, aerial lift, boom lift, scissor lift, manufacturing equipment, agricultural equipment, oil and gas equipment, refuse equipment, garbage trucks, trailers, conveyors, exercise equipment, safety, consumer products, chairs, seating, Forklift, thrill ride, zip line
Experienced mechanical engineer (MS, PE) and certified safety professional (CSP) with seven issued patents. Award winning inventor. President of Alpine Engineering and Design, Inc., a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Consulted on multiple products including: forklifts, conveyors, aerial lifts, garbage trucks, trailers, exercise equipment, seating and manufacturing equipment.
Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and a certified safety professional in comprehensive practice (CSP). Certified operator and trainer for forklifts, powered industrial trucks, boom lifts, scissor lifts, MEWPS, rough terrain forklifts. Approaching 20 years experience in product development, patents, safe equipment desi...