Motorcycle Expert Witnesses

Phoenix, Arizona

Mechanical Engineering, Failure Analysis - Accident Reconstruction, Automotive Engineering, Fire, Explosions, Plumbing, Premises Liability, Slip-Trip & Fall, Bicycle, Motorcycle, Products Liability, Transportation, Recreational Vehicles, Heavy Equipment, Industrial Equipment & Machinery, HVAC

Mr. Behrens has 40 years of experience in mechanical engineering, with the last 36 years primarily devoted to failure analysis and forensic engineering. His forensic engineering practice is diverse and has included conducting over a thousand engineering investigations involving a wide range of fires, explosions, accidents, and product failures. Mr. Behrens has conducted hundreds of full-scale vehicle crash, fire and component-level tests, which has provided a practical basis for his extensive knowledge and expertise in the analysis of automotive fires, failures and accidents. Mr. Behrens also has expertise in fire and failure analysis involving appliances, plumbing systems, fire sprinkler systems, HVAC, and commercial/industrial equipment. Mr. Behrens is a Certified Fire Investigator (CFI) and Certified Vehicle Fire Investigator (CVFI) by the International Association of Arson Investigators (IAAI) and a Certified Fire and Explosion Investigator (CFEI) by the National Associat...

Norco, California

Accident Reconstruction, Law Enf & Criminal Justice - Seat Belts, Airbags, Restraint Systems, Collision Analysis, Accident Causation, Crash Data Retrieval, Black Box, EDR, CDR Report Analysis, Tesla, Vehicle Inspection, Motorcycle, Pedestrian, Drone, Collision Reconstruction, Traffic Accident Reconstruction, Traffic Enforcement Strategy, Traffic Safety

A traffic collision reconstructionist accredited by the Accreditation Commission for Traffic Accident Reconstruction (ACTAR), a sUAV (drone) pilot licensed by the Federal Aviation Administration, and have completed the accident reconstruction certificate program by the Society of Automotive Engineers (SAE). With over 27 years in law enforcement, I have extensive experience with on-scene collision investigations ranging from minor fender-benders to multi-fatal collisions. I have investigated and assisted in the prosecution of hit-and-run collisions, DUI collisions, insurance fraud, vehicular manslaughter, and vehicular murder cases. Recognized as a subject matter expert in both criminal and civil courts for my knowledge of accident reconstruction, accident investigation, and general traffic enforcement. I have over a thousand hours of training in accident reconstruction including but not limited to forensic mapping, pedestrian collisions, motorcycle collisions, emergency vehicle c...

Los Angeles, California

Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle, Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe

Joseph Quinn, MS, PE, is a Forensic Metallurgy and Metallurgical Engineering consultant. He is a Licensed Professional Engineer in Metallurgical Engineering and is registered in 7 states (CA, PA, UT, NV, AZ, CO, WA). He has provided over 1,000 Failure Analysis investigations on metallic and non-metallic (glass, plastic, rubber, and composite) materials or products. Mr. Quinn provides metallurgical and materials consultation, expert witness testimony, and forensic failure analysis for civil litigation with retentions by defendants and plaintiffs. He has received awards in the International Metallographic Contest and has conducted several presentations on metallurgical engineering and failure analysis subjects at universities, ASM meetings, and industry events. He is President of the National Society of Professional Engineers in California (NSPE-CA) and is active in several technical societies. He has taught metallurgical engineering course topics in Principals and Applications of ...

El Dorado Hills, California

Traffic Engineering, Construction Defects - Highway design, hydroplaning, walkways, parking, pavement design, traffic safety, asphalt, concrete, soil, maintenance, roadway defects, traffic control, pedestrian, bicycle, motorcycle, vehicle accidents, ADA, work zone safety, trip&fall accidents, MUTCD

Dr. Shakir Shatnawi is a licensed professional engineer with over 30 years of professional engineering experience as follow: 2010-Present: President /Shatec Engineering Consultants, LLC, El Dorado Hills, CA, California 1991-2010: From Transportation Engineer to Division Chief (progressive promotions)/California Department of Transportation (Caltrans): D-10 (Stockton), District 4 (Oakland), and Headquarters (Sacramento), California. 1993-1999: Adjunct Professor/California State University, Sacramento, California. 1997-1999: Adjunct Professor/National University, Sacramento, California 1989-1990: Research Fellow/Turner-Fairbank Highway Research Center, Federal Highway Administration (FHWA), McLean, Virginia. Dr. Shakir Shatnawi is an expert witness related to the following : • Highway Engineering, Transportation Engineering & Parking design • Pavement standards, construction, maintenance and repairs • Construction defects, failures, specifications, & disputes • Traffic Enginee...

Stratford, Connecticut

Accident Reconstruction, Products Liability - Mechanical Engineering, Biomechanics, Automotive, Construction, Engineering, Failure Analysis, Forensic Science, Golf Carts, Human Factors, Motorcycle, Premises Liability, Safety, Slip Trip & Fall

Our staff of experienced engineers are ready to apply established scientific and engineering knowledge and techniques to your case. Our staff has published hundreds of papers, served on national ANSI standards committees and assisted over 2,600 attorneys and insurance agents settle or try their cases. Because the laws of physics and principles of engineering are universal, we are able to investigate and opine on a wide range of topics including motor vehicle crashes, heavy machinery, consumer products, construction sites, falls and biomechanical analyses. In each case, we assist our clients by determining, in as much detail as possible, how and why an accident occurred and communicating those finding in a clear and concise manner.

Sarasota, Florida

Accident Reconstruction, Biomedical Engineering - Auto Accident, Accident Reconstruction, Biomedical, Biomechanical, Collision Analysis, Crash Data Retrieval, Human Factors, Motorcycle, Occupational Safety, Premises Liability, Product Liability, Slip Trip & Fall

Bradley is a Biomedical and Mechanical engineer with extensive experience in accident reconstruction. Bradley is a licensed professional engineer (PE) in Michigan and Florida. He specializes in vehicular accident reconstruction and has investigated hundreds of vehicle accidents involving cars, trucks, pedestrians, bicyclists, motorcycles, etc. The investigations have involved issues of nighttime visibility, downloading of crash data (black box data), reaction time, and blind spots. He holds a Bachelor of Science in Mechanical Engineering from the University of Michigan and a Masters of Science in Engineering with a concentration in Biomedical from Purdue University. Bradley has co-authored a chapter in Forensic Human Factors and Ergonomics: Case Studies and Analysis and Occupational Health and Safety Management in the Handbook of Human Factors & Ergonomics. He is also currently a committee member of the Underwriters Laboratories (UL) Standards Technical Panel (STP) 2201: Engi...

Tampa, Florida

Accident Reconstruction, Trucking - Accident Investigation, Rapid Response, Commercial Vehicle Collisions, Crash Data Retrieval, EDR Downloads, Human Factors, Motorcycle, Pedestrian, Bicyclist, Electric scooters, Simulations, Animations, Infotainment Downloads, ECM Downloads, Nighttime Visibility, Drone pilot, Damage Consistency Evals

Joe is an accident reconstructionist delivering meticulous and comprehensive collision analysis and reconstruction services catering to both passenger and commercial vehicles. Employing state-of-the-art data acquisition systems and advanced analysis tools, I adeptly collect and decipher pivotal data sourced from the scene, EDR black boxes, and other relevant sources. This data enables me to reconstruct the events leading up to the collision with a high level of accuracy and provide a scientifically supported analysis to assist with determining liability and contributory factors. I have investigated and reconstructed hundreds of crashes involving cars, trucks, pedestrians, bicyclists, electric scooters, motorcycles, etc. over the past 20+ years.

New York

Accident Reconstruction, Products Liability - Mechanical Engineering, Biomechanics, Automotive, Construction, Engineering, Failure Analysis, Forensic Science, Golf Carts, Human Factors, Motorcycle, Premises Liability, Safety, Slip Trip & Fall

Our staff of experienced engineers are ready to apply established scientific and engineering knowledge and techniques to your case. Our staff has published hundreds of papers, served on national ANSI standards committees and assisted over 2,600 attorneys and insurance agents settle or try their cases. Because the laws of physics and principles of engineering are universal, we are able to investigate and opine on a wide range of topics including motor vehicle crashes, heavy machinery, consumer products, construction sites, falls and biomechanical analyses. In each case, we assist our clients by determining, in as much detail as possible, how and why an accident occurred and communicating those finding in a clear and concise manner.

Austin, Texas

Accident Reconstruction - ACTAR, Automotive, Pedestrian, Commercial Vehicle, Motorcycle, Event Data Recorder Retrieval/Analysis, 3D Animation, Bicycle, Crush Analysis, Speed Determination, Time/Distance Analysis, Accident Site Mapping

Larry W. Busby is the owner and manager of Primary Investigations, a private investigation firm (TX #A17699), established in 2012. Larry was certified by the Accreditation Commission for Traffic Accident Reconstruction in 2015 and has extensive training, from the Northwestern Center for Public Safety, the Institute of Police Technology and Management, the University of Tulsa in the reconstruction of automobile, pedestrian, bicycle and commercial vehicle accidents. Larry is a member of several professional organizations including TAARS, IATAI, NAPARS, TALI, CALI, and FALI and is certified in Bosch event data recorder retrieval and analysis. Primary Investigations can produce high quality 3D animations based on laser scan data from the accident scene depicting the accident, sight obstructions and other features unique to the accident. Additionally, as the owner of Delta Land Surveying and as a Registered Professional Land Surveyor licensed in NM, TX, CO and OK Larry is uniquely qu...

Edmonds, Washington

Accident Reconstruction - criminal cases, motorcycle, pedestrian, vehicle vs vehicle, crash data retrieval using Bosch CDR system, crash data retrieval for Hyundai, Kia and Tesla

Former President of WATAI - Washington Association of Technical Accident Investigators (ten years) ACTAR accredited #1912 32 years in Accident Reconstruction Over 950 on scene collision investigations while with the King County Sheriff's Office More than 3500 collisions analyzed I have testified about 70 times in the past 4 years

Madison, Wisconsin

Accident Reconstruction, Products Liability - motorcycle, ATV, UTV, side by side, video analysis, snowmobile, watercraft, scooter, motorcycle dynamics, electric mobility, motocross track, motorcycle safety, bicycle, electric motorcycle, Off-road safety, surveillance video, video forensics, mechanical defect, vehicle design, video enhancement

Curtis M. Beloy, PE is an expert with two decades of accident analysis and defect investigation experience. He analyzes incidents involving all types of vehicles and equipment- including cars, motorcycles, bicycles, trucks, and off-highway vehicles. He uses state-of-the-art technology such as 3D laser scanning, drone surveying, EDR retrieval, simulations, photogrammetry, videogrammetry, and engineering animations. Mr. Beloy's engineering career spans R&D in the automotive industry, accident analysis at multi-disciplinary forensic engineering firms, and vehicle design evaluations for major motorcycle and ATV manufacturers. He has researched vehicle stability, controls, electronic aids, engine and drivetrain failures, and overall vehicle design. He has consulted manufacturers on product design and the US Border Patrol on ATV safety. He is a former motorcycle racer with more than 25 years of experience with vehicle repairs and tuning. Mr. Beloy's research includes forensic analysis o...