Cranes Expert Witnesses
Cranes expert witnesses and consultants listed here may be able to form expert opinions, draft expert witness reports, provide expert witness testimony at deposition and/or trial as or serve as consulting (non-testifying) experts on cranes. The cranes expert witness listings on this page are typically from fields/areas of expertise such as: Accident Reconstruction, Civil Engineering, Construction, Equipment & Machinery, Intellectual Property, Mechanical Engineering, Metallurgy, Safety, Structural Engineering, and Transportation.
Dennis W. Eckstine
Eckstine & Associates, Inc.
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Florida
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Laurel A Wimmerstedt
LAW Construction Safety Consultants
Florida
Safety, Construction
-
OSHA, Accident, Workers Compensation, Risk Managment, Safety Training, Safety, Fall Protection, Catastrophic Injury, Struck By, Amputation, Scaffolding, Personal Protective Equipment, Fall Prevention, Multi-Employer, Citations, Work Zone Safety, Cranes, Slip Trips Falls, Personal Lifts
Over 30 years experience in construction safety, OSHA Outreach trainer since 1999, and consultant on major construction projects throughout the United States. Currently working with large General Contractors, subcontracting companies and water treatment facilities. Have been a part of over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations for multiple clients. Expert at incident investigation, accident reconstruction, and injury management and investigation.
AREAS OF EXPERTISES INCLUDES:
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Disaster & Emergency Management
• Slip, Trip, Falls
• Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS)
• Hand Tool Safety
• Heavy Construction Equipment back over, run over, and struck by
• High Visibility Safety Apparel
• OSHA Whistle Blower protections for safety related matters
• Respirator ...
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Georgia
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Laurel A Wimmerstedt
LAW Construction Safety Consultants
Acwoth, Georgia
Safety, Construction
-
OSHA, Accident, Workers Compensation, Risk Managment, Safety Training, Safety, Fall Protection, Catastrophic Injury, Struck By, Amputation, Scaffolding, Personal Protective Equipment, Fall Prevention, Multi-Employer, Citations, Work Zone Safety, Cranes, Slip Trips Falls, Personal Lifts
Over 30 years experience in construction safety, OSHA Outreach trainer since 1999, and consultant on major construction projects throughout the United States. Currently working with large General Contractors, subcontracting companies and water treatment facilities. Have been a part of over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations for multiple clients. Expert at incident investigation, accident reconstruction, and injury management and investigation.
AREAS OF EXPERTISES INCLUDES:
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Disaster & Emergency Management
• Slip, Trip, Falls
• Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS)
• Hand Tool Safety
• Heavy Construction Equipment back over, run over, and struck by
• High Visibility Safety Apparel
• OSHA Whistle Blower protections for safety related matters
• Respirator ...
John Hlinka, PE, M. ASCE
Benton, Kentucky
Structural Engineering, Civil Engineering
-
civil, railroad, accident, cranes, failures, foundations, structures, drainage, culverts, washouts, hydrology, concrete pump trucks, corrosion, chemical, industrial, building codes, inspections, construction, OSHA Compliance, swimming pools
Mr. Hlinka has worked over 40 years in the Engineering, Procurement and Construction Management market with experience in numerous industries: Chemical, Oil Refinery, Pulp & Paper, Adhesives, Nuclear Power Generation, Nuclear Feed Stock, and Steel. His work has overlapped with residential and commercial industries. Throughout his career he has engineered and managed a myriad of projects in these industries and has provided leadership to the various companies in the capacities of: Site Manager, Design Manager, Project Manager, Construction Supervisor, and currently as President. Design engineering, analysis, and inspection experience includes structural steel, reinforced concrete, stone, masonry, wood, and stormwater drainage.
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Kentucky
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
ANTHONY CORRADO, CHST, SSM, CSFSM, OSHA-Trainer
CONSTRUCTION SAFETY & LIABILITY EXPERT
NYC Safety Services, LLC
New York, New York
Construction, Safety
-
Construction Accidents & Injuries, New York Labor Law, OSHA, Scaffolding, Construction Safety, Holes-Covers-Falls, Construction Standard of Care, Aerial Lifts, Fork-Lifts, Reinforced Concrete, Excavations, Shoring, Underpinning & Foundations, Steel Erection, Personal Injury, Cranes, Scaffolds
Anthony Corrado is Founder and Principal of NYC Safety Services, LLC, a safety consulting firm in New York City that provides NYC contractors with Site Safety Plan Development, OSHA Training and on-site Licensed Safety Professionals who oversee safety on large scale construction projects as regulated by the NYC Department of Buildings.
Anthony has had a long successful and diversified career in the NYC construction industry spanning almost 40 years. Starting at a young age as a Union Carpenter apprentice and working his way up to becoming a carpenter foreman in his early twenties, Anthony has continued his education and became a superintendent working on interior renovations in hi-rise buildings throughout NYC. He continued to progress and was continuously given larger projects and more responsibilities. Anthony rose through the ranks becoming a Senior Project Superintendent for a top 10 Construction Management company in the US and successfully managed projects up to $150 Million....
Dennis W. Eckstine
Eckstine & Associates, Inc.
New York
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
New York
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
John J Brewington, CAFM, CEM
Fleet Management Expert: CAFM & CEM Certifications
Brewington & Company
Mount Airy, North Carolina
Transportation, Construction
-
FMCSA Reg's, Electrical Contact, Fleet Management, Bucket Trucks, Digger Derricks, Construction Equipment, ANSI Z15.1, ANSI A92.2, ANSI A10.31, ANSI A92.22, Aerial Devices, MEWPs, Best Practices, Standard of Care, Crashes - Vehicle, Maintenance Practices, Driver Selection, Trucks, Cranes, OSHA Req
Dual certified fleet management professional with over 50 years of hands-on fleet management and consulting experience to the transportation and construction sectors. Professional certifications include the Certified Automotive Fleet Manager (CAFM) designation earned in 2003 from the NAFA Fleet Management Association and the Certified Equipment Manager (CEM) designation earned in 2008 from the Association of Equipment Management Professionals (AEMP). Recertification requirements have been met for both and both certifications are current.
Active in ANSI standards development groups for bucket trucks (ANSI/SAIA A92.2), MEWPs (ANSI/SAIA A92.20, .22, & .24), digger derricks (ANSI/ASSP A10.31), and fleet safety (ANSI/ASSP Z15.1). Also serve on the A10 and A92 Main Committees.
Extensive knowledge of fleet management best practices related to operator selection, training, and monitoring; vehicle & equipment acquisition, inspection, maintenance, and disposal; maintenance facilities desig...
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Jamestown, North Carolina
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Laurel A Wimmerstedt
LAW Construction Safety Consultants
North Carolina
Safety, Construction
-
OSHA, Accident, Workers Compensation, Risk Managment, Safety Training, Safety, Fall Protection, Catastrophic Injury, Struck By, Amputation, Scaffolding, Personal Protective Equipment, Fall Prevention, Multi-Employer, Citations, Work Zone Safety, Cranes, Slip Trips Falls, Personal Lifts
Over 30 years experience in construction safety, OSHA Outreach trainer since 1999, and consultant on major construction projects throughout the United States. Currently working with large General Contractors, subcontracting companies and water treatment facilities. Have been a part of over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations for multiple clients. Expert at incident investigation, accident reconstruction, and injury management and investigation.
AREAS OF EXPERTISES INCLUDES:
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Disaster & Emergency Management
• Slip, Trip, Falls
• Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS)
• Hand Tool Safety
• Heavy Construction Equipment back over, run over, and struck by
• High Visibility Safety Apparel
• OSHA Whistle Blower protections for safety related matters
• Respirator ...
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Ontario
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Dennis W. Eckstine
Eckstine & Associates, Inc.
Waynesboro, Pennsylvania
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Pennsylvania
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
South Carolina
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Laurel A Wimmerstedt
LAW Construction Safety Consultants
South Carolina
Safety, Construction
-
OSHA, Accident, Workers Compensation, Risk Managment, Safety Training, Safety, Fall Protection, Catastrophic Injury, Struck By, Amputation, Scaffolding, Personal Protective Equipment, Fall Prevention, Multi-Employer, Citations, Work Zone Safety, Cranes, Slip Trips Falls, Personal Lifts
Over 30 years experience in construction safety, OSHA Outreach trainer since 1999, and consultant on major construction projects throughout the United States. Currently working with large General Contractors, subcontracting companies and water treatment facilities. Have been a part of over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations for multiple clients. Expert at incident investigation, accident reconstruction, and injury management and investigation.
AREAS OF EXPERTISES INCLUDES:
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Disaster & Emergency Management
• Slip, Trip, Falls
• Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS)
• Hand Tool Safety
• Heavy Construction Equipment back over, run over, and struck by
• High Visibility Safety Apparel
• OSHA Whistle Blower protections for safety related matters
• Respirator ...
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Tennessee
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Laurel A Wimmerstedt
LAW Construction Safety Consultants
Tennessee
Safety, Construction
-
OSHA, Accident, Workers Compensation, Risk Managment, Safety Training, Safety, Fall Protection, Catastrophic Injury, Struck By, Amputation, Scaffolding, Personal Protective Equipment, Fall Prevention, Multi-Employer, Citations, Work Zone Safety, Cranes, Slip Trips Falls, Personal Lifts
Over 30 years experience in construction safety, OSHA Outreach trainer since 1999, and consultant on major construction projects throughout the United States. Currently working with large General Contractors, subcontracting companies and water treatment facilities. Have been a part of over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations for multiple clients. Expert at incident investigation, accident reconstruction, and injury management and investigation.
AREAS OF EXPERTISES INCLUDES:
• Accident Investigation & Root Cause
• Aerial Lifts, MEWP
• Construction Safety/Accidents
• COVID Safety & Pandemic Management
• Disaster & Emergency Management
• Slip, Trip, Falls
• Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS)
• Hand Tool Safety
• Heavy Construction Equipment back over, run over, and struck by
• High Visibility Safety Apparel
• OSHA Whistle Blower protections for safety related matters
• Respirator ...
Dennis W. Eckstine
Eckstine & Associates, Inc.
Texas
Construction, Equipment & Machinery
-
Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
Texas
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...
Bradley N Plank, PE
MME Forensic Consulting, Inc.
Dallas, Texas
Mechanical Engineering, Metallurgy
-
Product Liability, Failure Analysis, HVAC, Oilfield, Heavy Equipment, Cranes, Cables, Medical Devices, Plastics, Boilers, Water Heaters, Plumbing
Using his combination of mechanical and metallurgical (including plastics) experience and education, Mr. Plank provides forensic and consulting engineering services to attorneys, insurance professionals, and manufacturing companies. A registered engineer in Texas and 23 other states, his experience includes 32 years in manufacturing in the metals processing industries, 29 years performing failure analyses, and 26 years investigating claims. Mr. Plank has testified in a wide variety of matters including personal injury and property damage, in both state and federal court, and his testimony has never been excluded. Assignments have involved mechanical equipment, appliances, oil and gas transmission equipment, plumbing, HVAC, heavy equipment, machine tools, cranes and wire cables, manufacturing processes, and thermal processes, among many others.
Khalid Sorensen, PhD
Robotics & Automation Technology Founder
Finity Engineering LLC.
College Place, Washington
Mechanical Engineering, Intellectual Property
-
Automation, Robotics, Machine, Design, Mechatronics, Dynamics, Motion Control, Vibration, Segway, Product Liability, Machine Vision, Sensors, Traction, Tire Mechanics, Cranes, Warnings, ASRS
Twenty years of experience developing and implementing mechatronic, motion control, and automation technologies. Founder of a motion-control technology company where the industry-recognized motion-control technologies were key drivers in the acquisition of his company 5 years after inception by a global leader in automation.
Served as CTO at a world-class supplier of large-scale automation, advanced manufacturing, and nuclear handling solutions. Responsibilities include providing technical oversight of critical projects; identifying and mitigating areas of high technical risk; leading in the creation of cutting-edge control, automation, and robotic technologies; directing R&D efforts; managing the business’ technology portfolio; and disseminating and facilitating the use of best-practice engineering methodologies.
Adjunct Associate Professor at the Georgia Institute of Technology where he lectures on various engineering topics. These include: Dynamics, Advanced Controls, Vibratio...
Gary E. Kilpatrick
Forensic Engineering Services Various Accidents
The Kilpatrick Group, PA
West Virginia
Accident Reconstruction, Mechanical Engineering
-
Forklifts, Conveyors, Machine Design, Genie Lifts, Products Liability, Cranes, OSHA, Thermodynamics, Pumping and Piping, Safety, Industrial Processes, Saws, Heat Transfer, ATV/ROV/UTV Crash, PPE, Punch & Forming Presses, Fluid Dynamics, Motorcycle Crash, Scissor Lifts, Fasteners
Since 2003, Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group, PA has been a forensic engineering service provider to our legal and insurance clients. Gary is a board-certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary is a mechanical design engineer, and a licensed Professional Engineer (PE) in 16 states currently. Gary has approximately 20 years of industrial work experience and is an OSHA expert with OSHA 29CFR 1910, 29CFR 1926 and 29CFR 1928 and has OSHA regulations safety certifications as well as FDA and cGMP in animal food processing. He travels throughout the United States to investigate and reconstruct industrial accidents.
Gary is one of the top Forklift experts in the United States including the sit-down, stand-up narrow aisles pantograph, turret type, Telehandler rough terrain forklifts and pallet jack troubleshooting and accident investigation to our legal and insurance clients. He is...