47 Trucking Safety Expert Witnesses Found

Civil Engineering, Transportation - Trucking, Guardrail, Barrier, Highway Design, Highway Safety, ISPE, Bridge railing, Traffic Safety, Cable Barrier, Concrete Barrier, Guardrail ends/terminals, Traffic engineering, Construction Engineering, Traffic control, tree crash, pole crash, Highway construction, Run off road crash, Safety

...• PhD in civil engineering with a focus on highway safety and a registered Professional Engineer in 15+ states. • Special focus on roadside safety and highway design. • Published in peer-reviewed literature, conference proceedings books, monographs, and trade publications....

Products Liability, Transportation - packaging, freight, load securement, pallets, boxes, packaging machines, cargo transportation, industrial injury, industrial safety, packaging design, packaging testing, corrugated, intellectual property, business ethics

...He is also an expert on pallets, crating, warehousing and transporting products by semi-truck. He does forensic analysis of packaging failures that caused damage or injury. He has bought, sold operated, supervised, removed and installed packaging machinery. He has managed many warehouses and a fleet of trucks. He has run a packaging testing lab and held almost every job in a packaging operation over his 30+ year career. He has completed Expert Reports on packaging failure, load securement, freight transportation, intellectual property, crating, packaging design, Lean Manufacturing, intellectual property and pallets. He has given Depositions, testified at Trial and consulted with attorneys in a variety of cases. He is an esteemed consultant in the packaging field and has done consulting projects all over the world. He was a Regional Safety Champion for a Fortune 500 manufacturing corporation. He also holds a US Patent. He was on the Advisory Board of Paperboard Packaging Magazine....

Transportation, Oil and Gas - Commercial Motor Vehicle, HazMat, DOT, OSHA, Truck Accidents, FMCSR, FMCSA, OIL field, Propane, Driver Standard of Care, Loading, Unloading, Oversized loads, Electronic log compliance, Driver Hiring & Training, Hours of Service Issues, PI, Driver Qualification File, Clause 391.1,

...Trained & Certified • Licensed Private Investigator • Oil Field Heavy Trucking Experienced • Operation, Inspection & Maintenance of Tractor- Trailers • OSHA 10 & 30 Certified • Oversized Load Experienced • Propane & (HAZ-MAT) Hazardous Materials Certified Driver • Safety and Risk Management Consultant • Truck Driver Actions, Reactions, Responsibilities, Qualifications &Training • Ability to Pass & Maintain two-year DOT Medical Certificate

Biomechanics, Accident Reconstruction - Accident Reconstruction, Biomechanical Analysis of Injury, Premises Liability, Slips/Trips and Falls, Crash Data Retrieval, Heavy Vehicle EDRs, Blackbox Download, Photogrammetry, Computer Simulations, Failure Analysis, Human Factors, Laboratory Testing, 3D Laser Scanning, Expert Witness Testimony

...Technical Areas of Specialization: - Biomechanical Analysis of Injury - Accident Reconstruction - Premises Liability; Slips/Trips and Falls - Crash Data Retrieval; Heavy Vehicle EDRs - Photogrammetry and 3D Computer Simulations - Vehicle Systems Analysis Services: - Accident Reconstruction - Biomechanical Analysis of Injury - Premises Liability; Slips/Trips and Falls - Crash Data Retrieval - Heavy Truck Blackbox/EDR Downloads - Failure Analysis - Human Factors - Laboratory Testing - 3D Laser Scanning - Computer Simulations - Expert Witness Testimony - Litigation Support Incident Types: The following are examples of types of incidents that I investigate: -Transportation Accidents: Automotive, Motorcycles, Bicycles, Scooters, Golf Carts, Boats, Jet Skis, Buses, Heavy Trucks - Recreational Accidents: Exercise Equipment, Amusement Parks, Playground Incidents, Sports Injuries, Helmets/Personal Protective Equipment - Premises Liability: Slips/Trips and Falls, Falling Objects, Code Compliance...

Maritime, Slip Trip & Fall - Personal injuries, boating accidents, collisions/allisions, investigation, ship, yachts, seaworthiness, captain responsibilities, crew, passenger safety, Rules of the Road, equipment failure, sinking, drowning, vessel operation, safety, sport fishing, charter boat, jet ski, kayak, SUP, marina safety

...Passenger/crew interaction, training and safety orientation are areas where many liabilities are created due to negligent actions, and I have experience opining on those issues based on Rules of the Road and other regulations, standard duty of care and safety protocols. I have served as a vessel charter captain for 30+ years, specializing in; crew training, safety procedures, crew drills and practice, passenger safety orientation. During that lengthy career I have had no accident or injury claims because I am a diligent seafaring professional and I know what dangers to look for and remedy before they cause problems. I work as a professional writer, public speaker and college teacher. My expert reports tend to be influential and my testimony skills have been proven in depositions and in the courtroom. Investigation and opinions regarding accidents towing or launching boats are within my wheelhouse. I drove tow vehicles with trailers for many years with no accidents nor injuries....

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

...., CSP, CSHP, CRSP, CHSC, has over 30 years of experience managing safety and health for various projects. He has been involved with multiple construction safety/OSHA cases as an expert witness. A sampling of the expert witness cases he has been involved with include: • Workplace injury at refinery construction project. • Worker fatally electrocuted during a paving incident. • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii....

Accident Reconstruction, Engineering - Mechanical Engineering, Auto Accidents, Accident Biomechanics, EDR download, analysis, including TESLA, Work Place Accidents, Heavy Vehicles, Motorcycles, Pedestrians, Bicycles, Failure Analysis, Computer Models, Simulations, Finite Element Modeling (FEA), Human Factors, Vehicle Dynamics and Design.

...An expert in accident reconstruction using computer simulations of accidents involving vehicles, trucks, heavy vehicles, motorcycles, biomechanics, pedestrians, bicycles, occupational, workplace, failure analysis impact forces, industrial accidents. EDR (Event Data Recorder) analysis including TESLA vehicles, patents. EXPERT WITNESS EXPERIENCE: Written reports, depositions & trial experience....

Products Liability, Transportation - packaging, freight, load securement, pallets, boxes, packaging machines, cargo transportation, industrial injury, industrial safety, packaging design, packaging testing, corrugated, intellectual property, business ethics

...He is also an expert on pallets, crating, warehousing and transporting products by semi-truck. He does forensic analysis of packaging failures that caused damage or injury. He has bought, sold operated, supervised, removed and installed packaging machinery. He has managed many warehouses and a fleet of trucks. He has run a packaging testing lab and held almost every job in a packaging operation over his 30+ year career. He has completed Expert Reports on packaging failure, load securement, freight transportation, intellectual property, crating, packaging design, Lean Manufacturing, intellectual property and pallets. He has given Depositions, testified at Trial and consulted with attorneys in a variety of cases. He is an esteemed consultant in the packaging field and has done consulting projects all over the world. He was a Regional Safety Champion for a Fortune 500 manufacturing corporation. He also holds a US Patent. He was on the Advisory Board of Paperboard Packaging Magazine....

Biomechanics, Accident Reconstruction - Human Factors, Animations, 3D Scans, Photometrics

...Accident reconstruction, biomechanics, human factors, safety, accident prevention, adequacy of warnings, computer animation and simulations, 3D scanning & photometric analyses, drone photography, construction defect, criminal defense, criminal prosecution, premises, product integrity, product liability, product testing, warnings, and lost income calculations. Auto, bicycle, bus, chair, elevator, escalator, forklift, gate, ladder, machinery, motorcycle, press, recreational equipment, roller coaster, slip/trip and fall, stairs, swimming pool, and truck. Litigation and claims, defense/plaintiff, educational seminars, and mediation and arbitration services.

Accident Reconstruction, Slip Trip & Fall - Vehicle Accident Reconstruction, Car, Bus, Bicycle, Pedestrian, Computer modeling, 3D, Accident Animation 3D Simulation, laser scan, Matterport, Faro, SAFETY ,Stairways, ramps, ADA, Building Code Analysis, Coefficient of Friction Testing Products ,Lighting, Guards, Industrial, SLIP, TRIP FALL

...Tyson has over thirty four years full time experience in Accident Reconstruction, Safety and Forensic Engineering. He has investigated, analyzed and reconstructed more than fifteen thousand accidents during this period. Consultant to many Governmental and Municipal agencies including United States Attorney, Federal Government, Department of Justice, State Attorney General California, Cities of Los Angeles, Burbank, Pasadena, Glendale, Ontario, Santa Monica ,San Gabriel, Ventura , Fountain Valley, Santa Barbara, Calexico, County of Los Angeles, Orange County, Ventura County. Goleta CALTRANS, State of California. He has supervised and trained many Engineers and Physicists in the field of Forensic Engineering....

Transportation, Safety - FMCSA, FMCSR, DOT, OSHA, Tank Truck, Loading, Unloading, Forklifts, Driver Qualifications, Drug & Alcohol, Hours of Service, Hazardous Materials, Training, Standard of Care, Vehicle Inspection, Fleet Safety, Commercial Drivers, CDL, Driver Hiring Standards, Record Retention, ELD, Cargo, Accidents

...., a Risk Management & Safety Consulting company based in Jacksonville, FL. which primarily serves the transportation industry, insurance industry and the legal profession. Mr. Carr has been Operations Manager – Transportation for Olin Chlor Alkali Products, Inc. in which he oversaw a private fleet of tractor trailers delivering hazardous materials throughout the western United States until June 2014. Prior to this he was Director of Risk Management, Safety & Health for Masco Contractors Services, Inc.; a nationwide company employing as many as 20,000 employees at 350 facilities and operating up to 10,000 motor vehicles. Prior to this he was Managing Director of Transurance Risk Retention Group, Inc. and Phoenix Risk Services, Inc., an Arizona licensed Risk Retention Group and a third-party claims administrator respectively whose specialty was commercial motor vehicle fleets....

Civil Engineering, Transportation - Trucking, Guardrail, Barrier, Highway Design, Highway Safety, ISPE, Bridge railing, Traffic Safety, Cable Barrier, Concrete Barrier, Guardrail ends/terminals, Traffic engineering, Construction Engineering, Traffic control, tree crash, pole crash, Highway construction, Run off road crash, Safety

...• PhD in civil engineering with a focus on highway safety and a registered Professional Engineer in 15+ states. • Special focus on roadside safety and highway design. • Published in peer-reviewed literature, conference proceedings books, monographs, and trade publications....

Accident Reconstruction, Biomedical Engineering - Auto Accident, Accident Reconstruction, Biomedical, Biomechanical, Collision Analysis, Crash Data Retrieval, Human Factors, Motorcycle, Occupational Safety, Premises Liability, Product Liability, Slip Trip & Fall

...He specializes in vehicular accident reconstruction and has investigated hundreds of vehicle accidents involving cars, trucks, pedestrians, bicyclists, motorcycles, etc. The investigations have involved issues of nighttime visibility, downloading of crash data (black box data), reaction time, and blind spots. He holds a Bachelor of Science in Mechanical Engineering from the University of Michigan and a Masters of Science in Engineering with a concentration in Biomedical from Purdue University. Bradley has co-authored a chapter in Forensic Human Factors and Ergonomics: Case Studies and Analysis and Occupational Health and Safety Management in the Handbook of Human Factors & Ergonomics. He is also currently a committee member of the Underwriters Laboratories (UL) Standards Technical Panel (STP) 2201: Engine, Generator Requirements and the ASTM Technical Committee E58 on Forensic Engineering....

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Biomechanics, Biomedical Engineering - Accident Investigation, Seatbelts, Airbags, Injury Causation, Vehicle Crashworthiness, Impact Biomechanics, Amusement Rides, Crash Testing, Workplace Safety, Failure Analysis, Slip Trip Falls, Motorcycle Accidents, Pedestrian Accidents, Personal Watercraft Accidents, Heavy Truck Accidents

...Miller, a Biomedical, Mechanical, and Manufacturing Engineer, has worked in the areas of crashworthiness, occupant safety, injury causation, product design, and manufacturing processes for 30 years. He holds 35 patents and has several peer reviewed publications in the safety and occupant injury field. He has provided research, expert analysis and testimony in product litigation involving General Motors, Ford, Chrysler, Toyota and others, and also in general negligence claims for both plaintiff and defense including major insurance companies. His product expertise includes impact biomechanics and injury causation, seat, seatbelt and airbag performance, as well as mechanical systems design and manufacture.

Trucking, Transportation - Trucking safety and compliance, fatigue driving of trucks, truck driver fitness, motor carrier fitness, cargo tank truck, forklift injury, trucking accident, truck loading/offloading injuries, negligent hire & retention, driver qualifications, load securement failure, construction zone accidents

...Scott L Turner: FMCSA-NASI Level 1 Enforcement Trained Roadside Inspector; National Academy of Sciences Transportation Research Board Panelist; Former 11-year Commercial Motor Vehicle (HazMat) & Cargo-Tank Instructor for the New Jersey State Police; IPTM: Inspection/Investigation of Commercial Vehicle Crashes; Bendix: Comprehensive Air-Brake Certified; NATMI: CMV Safety Supervisor and Director of Transportation Smith-System Defensive Driver Instructor; MUTCD Highway Construction Zone Trained FMCSA Regulatory Specialist; Many additional CMV type certifications available upon request. Truck Accident & Incident Experts, LLC currently has offices in the following states, and provide Plaintiff and/or Defense opinions concerning CMV crashes and/or incidents, including Hawaii and Alaska. Our locations are: Florida, New Jersey, Iowa, Wyoming and New Mexico.

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

...., CSP, CSHP, CRSP, CHSC, has over 30 years of experience managing safety and health for various projects. He has been involved with multiple construction safety/OSHA cases as an expert witness. A sampling of the expert witness cases he has been involved with include: • Workplace injury at refinery construction project. • Worker fatally electrocuted during a paving incident. • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii....

Human Factors, Products Liability - Warnings, Labels, Reconstruction, Visibility, Failure Analysis, Forensic Engineering, Defects, Photogrammetry, Metallurgy, Human Factors, Ergonomics, Construction, OSHA, Safety Engineering, Product Liability, Equipment Failures, Industrial Accidents, Power Utility Accidents, Insurance Claims

Specific Cases: Go cart nip point fatality, washing machine amputation, amputations in punch presses, hydro-pneumatic tank explosion, agricultural truck amputation, airport conveyors, biscuit cutter, amusement rides, water-jet fatality, slips & trips, lead rope snap, exercise machine failures and injuries, document burn injuries, folding chair collapse, concrete anchor system, nail gun injury, prosthesis bolt failure, steam iron electrocution, pool light burn, design of warnings and instructions, ATV rollover, automotive failures and crash related phenomena, measurement of ECDs (TASER®) Farm equipment, failed engines, mining conveyors, power plant systems, belt conveyors, potato processing system, sewer line, tire shredder processing analysis, failed brake die, failed conveyor bearing, RV axle repair failure, trailer suspension system failure, trailer separation, dump truck telescoping cylinder failure, brake system, headlight filament analysis, service station gasoline tank leak, bicycle...

Safety, Ergonomics - Human Factors, Risk Assessment, Product Safety, Slips/Falls, Complex environments, Workplace Design, Procedures, Maintenance, inspection

...I provided human factors/industrial safety support to plaintiff’s counsel. The jury said when interviewed that the human factors testimony I provided helped to persuade their decision. A synopsis of the lawsuit is below: On Oct. 25, a Denver district court jury found in favor of CORE in its lawsuit against Public Service Company of Colorado, a subsidiary of Xcel Energy Inc. (Xcel), regarding the mismanagement of the Comanche Unit 3 coal-fired power plant. CORE was awarded $26.45 million for lengthy outages on 2020 and 2022 caused by Xcel’s imprudent operations and negligence. 2022-Employee injury case. Two employees of a fish procession plant were repairing a conveyor system that was not properly locked out. The two employees entered a confined space called a fish dump with the knowledge of the supervisor. The employees contacted the actuator, and their legs were severely injured. I do not know the resolution to this case. 2022-Carpentar suing for his job back....

Intellectual Property, Mechanical Engineering - Patents, intellectual property, aerial lift, boom lift, scissor lift, manufacturing equipment, agricultural equipment, oil and gas equipment, refuse equipment, garbage trucks, trailers, conveyors, exercise equipment, safety, consumer products, chairs, seating, furniture.

...Worked on the development of multiple successful products including among other things: aerial lifts, garbage trucks, trailers, exercise equipment and manufacturing equipment. Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and a certified safety professional in comprehensive practice (CSP). Certified trainer for boom lifts, scissor lifts, rough terrain and counterbalanced forklifts. Over 10 years experience in product development, patents, safe equipment design, and design safety reviews. Experienced expert witness having drafted over 200 reports/declarations in patent cases as well as catastrophic injury and death cases. Design and built multiple custom testing devices obtain data and evaluate opinions....

Automotive, Appraisal & Valuation - Appraisal & Valuation Automotive, Automotive Dealer Practices, Automotive Economics, Automotive Leasing, Automotive Repair & Service, Lemon Law, Machinery & Equipment Appraisal & Valuation, Vehicles Appraisal & Valuation

...Paul is ASE Master Certified in both Automotive and Medium / HD Trucks including engines performance, electrical, driveline, brakes, steering and suspension as well as safety related systems. He has inspected over 2,500 vehicles since 2005 ranging from Model T Fords to 2015 BMW & Mercedes. He is qualified to inspect HD Semi Trucks and Construction Equipment as well as RV, Motorhomes and Campers. Mr. Paul also has inspection experience with Exotic & Luxury High End Cars as well as Boats and Watercraft. Automobile, medium duty and heavy-duty truck repair and inspection as well as heavy equipment such as construction and agriculture equipment. Litigation Support - Mr. Paul is a Certified Vehicle Appraiser and can provide opinions of value based on fair market value, diminished value and replacement values in accordance with USPAP. He has been court qualified as an expert vehicle inspector in multiple states as well as federal court. Mr....

Safety, OSHA - Accident Investigation, Safety Programs, Lockout, tagout, Machine Guarding, Fall Protection, Fall Prevention, Respiratory Protection, Personal Protective Equipment, Powered Industrial Trucks, Forklifts, Aerial Lifts, Scissor Lifts, General Industry, Construction, and Manufacturing.

...Certified Safety Professional. 35 years in safety & health management. 24 years in safety consulting. Authorized OSHA Construction Outreach Trainer. United States Marine Corps Reserve, Retired, Rank of Major. Marine Corps Infantry Officer. Safety Director at Colgate-Palmolive. Safety Specialist at Phillip Morris. Year 2000, started Compass Safety. Providing safety consulting services to General Industry and Construction companies. Duties included evaluating, improving, and implementing safety & health programs. Experienced in conducting OSHA compliance audits, hazard assessments, accident investigations, safety inspections, employee safety training, lockout / tagout procedures, and Safety Director duties and responsibilities.

Civil Engineering, Transportation - Trucking, Guardrail, Barrier, Highway Design, Highway Safety, ISPE, Bridge railing, Traffic Safety, Cable Barrier, Concrete Barrier, Guardrail ends/terminals, Traffic engineering, Construction Engineering, Traffic control, tree crash, pole crash, Highway construction, Run off road crash, Safety

...• PhD in civil engineering with a focus on highway safety and a registered Professional Engineer in 15+ states. • Special focus on roadside safety and highway design. • Published in peer-reviewed literature, conference proceedings books, monographs, and trade publications....

Transportation, Accident Reconstruction - Trucking, Trucks, Commercial Vehicles, Truck Safety, Overweight, size, weight restrictions, hazardous materials, compliance, fatigue, work zone, distracted driving, cargo tank, impaired driving, rollovers, Data Q, DOT, Driver qualifications, OSHA, loading, Commercial Vehicle, tank truck, CMV, speed

Thought leader on trucking and commercial vehicle safety and accident reconstruction. Lieutenant and Commanding Officer, Massachusetts State Police Commercial Vehicle Enforcement Section (2010-2022). Certified accident reconstructionist. Licensed attorney. Experienced expert and fact witness.

Safety, OSHA - Construction Safety, General Industry Safety, Hazardous Waste Operations and Emergency Response, Confined Space Entry, Fall Protection, Slips, Trips, and Falls, Hazard Communication (Chemical), Fork Lift, Respiratory Protection, Machine Guarding, Aerial Lift Safety, Roofing Safety

Highly experienced workplace safety professional and trainer. Over 6,000 hours of teaching experience - covering more than 40 topics related to job safety. Investigated over 150 incidents including serious injuries, chemical spills, and equipment and facility damage. Twenty-five years of experience as an Environmental, Health, and Safety Manager in manufacturing, chemical, and construction industries. OSHA Training Institute (OTI) authorized trainer since 2005. Training topics include OSHA safety topics, chemical emergency response, shipping hazardous materials, powered industrial trucks, and aerial lifts. Experienced in industrial and construction incident investigation conducting initial investigation and root cause analyses for over 150 incidents including worker injuries, chemical spills, and equipment and facility damage.

Engineering, Transportation - Failure Analysis, Automotive Design Analysis, Accident Reconstruction, Material Handling, Trailer Loading, Forensic Logistics Analysis, OSHA Compliance/Standards, Warning Labels, Machine Guarding, Stamping Presses, Injection Molding Presses, Backhoes, Loaders, Industrial Accidents, Appliance Leaks.

...Dale Warnke conducts assessments of supply chain, operations, logistics networks and facilities, safety regulations, forklift accidents, and accident reconstruction. Product Design senior engineer for design and test of automotive body, electrical, and mechanical components. In-plant Quality Manager, Senior Manufacturing Engineer, Senior Engineer of Manufacturing Process Analysis, including metal stamping presses, robotic welding equipment, injection molding presses. Member, National Society of Professional Engineers, Michigan Society of Professional Engineers, and National Academy of Forensic Engineers. 11 patents. 27 years Adjunct Professor in Manufacturing Engineering, Schoolcraft College. Forensic Engineering, investigation of mechanical design defects, product and design failure analysis, patent disputes, product liability, product defects. Vice President of Design and Manufacturing Engineering for 3 major corporations....

Accident Reconstruction, Slip Trip & Fall - Vehicle Accident Reconstruction, Car, Bus, Bicycle, Pedestrian, Computer modeling, 3D, Accident Animation 3D Simulation, laser scan, Matterport, Faro, SAFETY ,Stairways, ramps, ADA, Building Code Analysis, Coefficient of Friction Testing Products ,Lighting, Guards, Industrial, SLIP, TRIP FALL

...Tyson has over thirty four years full time experience in Accident Reconstruction, Safety and Forensic Engineering. He has investigated, analyzed and reconstructed more than fifteen thousand accidents during this period. Consultant to many Governmental and Municipal agencies including United States Attorney, Federal Government, Department of Justice, State Attorney General California, Cities of Los Angeles, Burbank, Pasadena, Glendale, Ontario, Santa Monica ,San Gabriel, Ventura , Fountain Valley, Santa Barbara, Calexico, County of Los Angeles, Orange County, Ventura County. Goleta CALTRANS, State of California. He has supervised and trained many Engineers and Physicists in the field of Forensic Engineering....

Safety, OSHA - Forklifts, Forklift Training, Content Validation (Test/Evaluation), Forklift Safety, Accident Reconstruction, Forklift Expert, Forklift Operating Standards, Forklift Operator Management, Forklift Certification, Powered Industrial Trucks, ANSI B56.1, OSHA 1910.178

33 years experience in forklift (powered industrial trucks) safety, OSHA, and performance management consulting. Speaker at international, national, state, and local conferences and seminars. Author of forklift focused articles and presentations emphasizing both forklift safety and productivity. Co-author of a chapter in a university text book addressing human performance technologies: Chap 4, “Solve the Problem…So it STAYS solved”. Performs accident reconstruction by reverse engineering probable behavior of the parties.

OSHA, Safety - Fall Protection, Construction, Construction Safety, Industrial Safety, Slip/Trip/Fall, Construction Accidents, Scaffold safety, Ladders, Ladder Safety, Trenching & Excavation, Excavation Safety, Trench Safety, Power Tools, Forklifts, Powered Industrial Trucks, Standard of Care, Machine Guarding

Cheryl Scanlon-Zinner is a board-certified safety professional with over twenty-five years of experience developing and implementing occupational safety programs in construction and general industry for employers, corporations and government agencies. She has trained thousands of management representatives, supervisors, and competent persons on the principles and practices of safety management, hazard identification, hazard evaluation and the implementation of the hierarchy of controls. She specializes in hazards that are likely to cause serious injuries and fatalities (SIFs), including falls from elevation, and other construction hazards, machinery hazards, forklifts, and ladders. She was the technical editor of Nigel's Ellis's textbook Introduction to Fall Protection. Cheryl is a member of several professional safety organizations. She was the president of the Philadelphia chapter of the American Society of Safety Professionals and is active in that organization....

Construction, Safety - OSHA, Scaffolding, Construction Safety, Construction Accidents & Injuries, Holes-Covers-Falls, New York Labor Law, Construction Standard of Care, Aerial Lifts, Fork-Lifts, Reinforced Concrete, Excavations, Shoring, Underpinning & Foundations, Steel Erection, Personal Injury, Cranes, Scaffolds

Anthony Corrado is Founder and Principal of NYC Site Safety Services, LLC, a safety consulting firm in New York City that provides NYC contractors with Site Safety Plan Development, OSHA Training and on-site Licensed Safety Professionals who oversee safety on large scale construction projects as regulated by the NYC Department of Buildings. Anthony has had a long successful and diversified career in the NYC construction industry spanning almost 40 years. Starting at a young age as a Union Carpenter apprentice and working his way up to becoming a carpenter foreman in his early twenties, Anthony has continued his education and became a superintendent working on interior renovations in hi-rise buildings throughout NYC. He continued to progress and was continuously given larger projects and more responsibilities....

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Accident Reconstruction, Products Liability - Ladders, scaffolds, shopping carts, fires & explosions, oil & gas industry, guarding, machine guarding, warnings, heavy trucks, brakes

...Co-authored three publications on ladder safety. Appeared on television three times to discuss shopping cart safety. Investigated fires and explosions, heavy truck accidents, industrial accidents, oil & gas industry, guarding, warnings, and plumbing failures.

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Human Factors, Engineering - Distracted driving, Driving behavior, Reconstruction, Biomechanics, Maritime, Manufacturing, Mining, OSHA, Premises Liability, Products Liability, Safety, Slips, Trips, Falls, Transportation, Warnings, Conspicuity, Cell phones, Texting, Lighting, Perception, Visibility, Instructions, Human Factors

...Rider’s expertise includes: • MVAs and pedestrian collisions, incl. trucks, trains, buses, motor/bicycles • Illumination, nighttime visibility, and conspicuity • DUI/DWIs, where intoxication was not a proximate cause of crash • Adequacy of product designs and warnings • The design and maintenance of safe civil and occupational environments • Premises liability, and slips, trips and falls • Workplace and construction safety Dr. Rider is a Professional Engineer (PE), a Certified Professional Ergonomist (CPE), and has served as a human factors consultant since 1999, including five years as a professor at West Virginia University. Dr. Rider attended the University of Tennessee, which conferred his Bachelor and Master degrees in Industrial Engineering. Dr. Rider then received his Ph.D. in Industrial and Operations Engineering from the University of Michigan. Dr. Rider’s research includes driver behavior and distraction, the performance of in-vehicle tasks, and occupational safety....

Transportation, Safety - Trucking, OSHA, FMCSA, DOT, FMVSS, Truck Accidents, Commercial Motor Vehicles, Drivers, Driver Actions, Hours of Service, Training, Hazmat, Fleet Operation, Fleet Maintenance

Leslie Smart has 50 (fifty) years of experience in trucks, truck equipment, related equipment, distribution by truck and tractor trailer (conventional and Hazmat), specifications, procurement, vehicle & driver safety, DOT/FMCSA regulations-compliance (including FMVSS, NHTSA, OSHA) operations, risk management, tires, truck maintenance (internal & by contract both with Penske & Ryder), training, behavior & monitoring. His experience also includes leasing of all types including full-service leases, managing a fleet directly and through a fleet management company. Responsibilities included the management of fleets of up to 5,500 vehicles in number. As an expert witness, Mr. Smart has worked equally with defendants and plaintiffs specializing in personal injury related to trucking, truck litigation, driver safety, fleet management, corporate fleet management, and operations. Professional Associations: Member of N.A.F.A. & N.T.E.A....

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Accident Reconstruction, Products Liability - Truck, Vehicle, Animations, Night Lighting, Crime Scene Reconstructions, Whiplash, Product Liability, Pedestrians, Motorcycle, Fork lift , Crane, Dart Out Accident, Slip and Fall, Fires Simulations, Explosion, Rain, Fog, Snow, Train, Crane, Lift, Vault, medical malpractice, Patent, Sun glare

...Kendall was awarded the Southern Trial Lawyers Warhorse Award, also was referred to as a “widely respected trial lawyer” by CBS 60 Minutes, and recognized as an automotive safety “Watchdog” by Automotive News. 4. Scott testified for 1st animations jury viewing in SC, GA, and TN, as Court Expert for Animations of Reconstructions, in Federal, State, and Criminal Courts. 5. He was twice honored to be invited to speak with the honorable Federal Judge Ross Anderson, about 15 animations at two South Carolina CLE programs, first at an Annual SC Trial Lawyers Convention at Hilton Head Island, where the Judge stated "Computer animation allows attorneys (and Experts) to convert witnesses' verbal testimony into dynamic, visual demonstrations capable of mentally transporting jurors to the scene. It is difficult to imagine a more effective tool (than animations) for enhancing your case presentation."...

Meteorology, Hydrology - forensic meteorology, heavy rain and flooding, high winds, fog, severe storms, hail, tornadoes, winter weather, heavy snow, slip and falls, icing, fire weather, weather-related accidents, agriculture weather, lightning verification, radar, satellite, and applied climate and meteorology

...I have worked on cases involving: • analyses of tornado/hail/wind (including derecho) damage to businesses, crops, people, farm property, and housing units for insurance-related claims/lawsuits, • climate and weather analyses for a mining operation, preventative planting insurance claim, crop spraying, and livestock operations, • rainfall recurrence interval analyses for flooding of homes and flash-flood related damages to businesses and trains/railroad tracks, • snowfall and rainfall analyses for insurance protection claims for recreational events, • climate and severe weather documentation for construction delays and adverse weather days, • cloud cover, moonlight, rainfall, fog, icing, snow, and wind analyses for automobile and semi-truck accidents, • slips and falls related to snowfall, icing/refreezing, and freezing drizzle, • windstorm and drought analysis for a wildfire, • fire-weather observations and research papers for a fellow consulting meteorologist, • a technical review of...

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

...., CSP, CSHP, CRSP, CHSC, has over 30 years of experience managing safety and health for various projects. He has been involved with multiple construction safety/OSHA cases as an expert witness. A sampling of the expert witness cases he has been involved with include: • Workplace injury at refinery construction project. • Worker fatally electrocuted during a paving incident. • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii....

Accident Reconstruction, Biomechanics - Accident reconstruction, Biomechanics, Event Data Recorder (EDR) Analysis, Engine Control Module (ECM) Analysis, Low-speed analysis, Site survey, Vehicle damage analysis, Photogrammetry, Acceleration force analysis, Delta-V determination, Momentum analysis, Lane change analysis, computer animation

...Holloman has worked many commercial vehicle (18-wheeler) cases involving automobiles and pickup trucks and provided computer renderings of accident scenarios and time/distance analysis. His consulting specialties are commercial (18-wheeler), private vehicle and forklift accident reconstruction, biomechanics, fatigue failure analysis, mechanical failure analysis, and machine tools failure analysis. Mr. Holloman also has trial and deposition testimony experience, having testified in trial or deposition in over 25 cases. Mr. Holloman’s continuing education includes biomechanics, commercial vehicle accident reconstruction I & II, commercial vehicle accident investigation courses, forklift operation and safety, OSHA compliance, and event data retrieval report analysis. Mr....

Business Operations, Transportation - Business Administration, Supply Chain Management, Warehousing, Transportation, Sourcing, Logistics, Inventory Control, Aviation Logistics, Aviation, Military Logistics, Trucking, Business Operations, Material Handling, Forklift and Forklift safety

...He has led organizations in major metal manufacturing operations, responsible for over 1700 vehicles in fleets to include all types of vehicles-- long haul trucks, local delivery trucks and freight line trucks, watercraft. He is a licensed professional engineer (PE) and Certified Professional Logistician (CPL). He has managed over 2 Million square feet of industrial and warehouse space in the Arctic, Pacific and the United States. He has testified in state and federal courts on logistics, manufacturing, transportation and supply chain matters. He was the Dean of the College of Business at Montana State University-Billings, as well as the Dean, School of Systems and Logistics, Air Force Institute of Technology, Dayton, Ohio. He is certified by SOLE, the International Society of Logistics as a Certified Professional Logistician. He is Defense Acquisition Worker Improvement Act (DAWIA) Level 3 certified in Acquisition Logistics....

Products Liability, Transportation - packaging, freight, load securement, pallets, boxes, packaging machines, cargo transportation, industrial injury, industrial safety, packaging design, packaging testing, corrugated, intellectual property, business ethics

...He is also an expert on pallets, crating, warehousing and transporting products by semi-truck. He does forensic analysis of packaging failures that caused damage or injury. He has bought, sold operated, supervised, removed and installed packaging machinery. He has managed many warehouses and a fleet of trucks. He has run a packaging testing lab and held almost every job in a packaging operation over his 30+ year career. He has completed Expert Reports on packaging failure, load securement, freight transportation, intellectual property, crating, packaging design, Lean Manufacturing, intellectual property and pallets. He has given Depositions, testified at Trial and consulted with attorneys in a variety of cases. He is an esteemed consultant in the packaging field and has done consulting projects all over the world. He was a Regional Safety Champion for a Fortune 500 manufacturing corporation. He also holds a US Patent. He was on the Advisory Board of Paperboard Packaging Magazine....

Safety, OSHA - 1910 General Industry, Accident Investigation, Fall Protection, Haz-Com, Hazard Recognition, Logistics Safety, OSHA Record Keeping, OSHA Standards, Powered Industrial Truck Operations, PPE, Risk Management, Root Cause Analysis, Safety Training, Warehouse Safety, Workplace Injuries

...Claverie has been doing occupational health and safety work since 2010 and has experience applying safe work practices within a broad range of industries including fire prevention, training, construction, power generation, manufacturing, DOT, and warehouse logistics. He can speak to a wide range of health and safety topics and the applicable regulatory requirements. He has a Bachelor of Science in Occupational Health and Safety and is certified through the BCSP and holds a current Certified Safety Professional certificate (CSP). He has in the past been a certified First Aid class trainer, respirator fit tester, and done industrial hygiene sampling work. He is very familiar with the OSHA 29 CFR 1910 General Industry Regulations, and also has experience with the OSHA 29 CFR 1926 Construction regulations as well....

Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents

...School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent with The Clark Equipment Company who invented the Forklift and Frontend Loader where Clark Equipment was the main competitor to Caterpillar. I setup and operated muti-axis CNC machining centers to machine gears, axle housings and all of the associated components for these drive train units namely drive steer axles and differential carriers for forklifts and cranes. I also assembled these components. I was a certified forklift operator and crane operator....

Accident Reconstruction, Products Liability - collision, motorcycle, EDR, ATV, UTV, SxS, surveillance video, dashcam, telematics, snowmobile, watercraft, PWC, skateboard, scooter, off-road, OHV, OHRV, motocross racetrack, powersports, ABS, ESC, failure, drivetrain, throttle, brakes, engine, rollover, BMX, bicycle, Harley, sportbike, dirtbike,

...He analyzes incidents involving all types of vehicles- including cars, motorcycles, bicycles, trucks, electric mobility products, and off-highway vehicles (OHVs). He uses advanced tools for site and vehicle documentation, retrieval of electronic crash data (CDR), forensic video analysis, and computer simulations / animations. He is a skilled automotive mechanic, adept at studying vehicle designs, interpreting evidence, and solving problems. He has testified as an expert witness in depositions, trials, and mediations since 2008. A lifelong enthusiast of motorcycles and powersports, his career spans two decades of product development at OEM suppliers, crash analysis at forensic firms, and defect evaluations at a vehicle testing firm. He has evaluated large-scale recalls and crashes involving vehicle stability, controls, electronic aids, suspension, and overall vehicle design. He has consulted manufacturers on product design and the US Border Patrol on ATV safety....