14 Suspension Expert Witnesses Found

Results Sorted Below by State

Frank S Will, PhD Ino8

Alabama
Automotive, Motorcycle - Engine, Motor, Defect, Damage, Failure, Exhaust, Emission, Carbon, Monoxide, NOx, Test, Measure, Defeat Device, Computer, Control, Software, Calibration, Tuning, Performance, Power, Fuel, Economy, Combustion, Leak, Heat, Burn, Fire, Gas, Diesel, Motorcycle, Autocycle, Bike, Bicycle, Battery, Lemon
...He has conducted extensive research in the reduction of emissions and improvement of vehicle efficiency, with applications to automotive control systems, and semi-active suspension systems. He is a Fellow of SAE-A, and a recipient of multiple international awards, and holds a PhD in Mechanical Engineering from Deakin University, Australia, an MBA from Henley Management College, UK, the MSc equivalent from University of Siegen, Germany, and a Graduate Certificate in Higher Education from Deakin University. Since around 50 years he has been involved with motorcycles, for over 20 years he competed in professional motorcycle racing, starting with trials over grass track to moto cross, super cross and Enduro, so he is also very experienced with two-wheeler specific accidents and injuries.

Johann B Garovi InterContinental HEAVY CIVIL ESTIMATOR INC. USA

SANTA ROSA, California
Construction, Dispute Resolution - Construction Cost Estimates, Quantity Survey, Means & Methods, Construction Techniques, Project Schedule, Nuclear Power Plant Concrete Structure, Suspension Bridge, Segmental Bridge, Arch Bridge, Marine Caisson Foundation, Pile Foundation, Roadways, Railways, Heavy Civil Infrastructure Construction
...Expert for new-construction and retrofitting of suspension bridges in North America. Water conveying tunneling and shafts sink-shaft-method deep marine foundations. Invented methods and construction techniques for the safe advancing of large diameter 100 meter / 328 feet long pilings steel plate casing / caissons including on site bending / welding pipe fabrication pile - rock - socket construction with deep shaft rock-drilling over the top method. Superstructures structural steel and concrete. Developing Mass-concrete cooling procedures. Extensive sitework mass - excavation and excavation support systems. Temporary works scaffolding and shoring systems....

Ioannis Kanellakopoulos, PhD Oraton Consulting

Redwood City, California
Automotive Engineering, Telecommunications - Automotive Systems, ADAS, Autonomous Vehicles, Self-Driving Cars, Adaptive Cruise Control, Blind Spot Monitoring, Lane Keeping, Automotive Software, Automotive Electronics, Collision Avoidance, Telecommunications, Networking, Carrier Ethernet, DSL, Wi-Fi, 5G, Wireless Transceivers, Telecom Standards
...Kanellakopoulos has designed and built telecom products such as DSL and Carrier Ethernet hardware and software, has conducted extensive research in adaptive control of nonlinear systems, with applications to automotive control systems, specifically driver assistance systems and active suspension systems. He is a Fellow of the IEEE, and a recipient of multiple international awards, and holds a PhD in Electrical Engineering from the University of Illinois at Urbana-Champaign.

Ronald D Schapf, PE ER3 Engineering

Newbury Park, California
Mechanical Engineering, Motorcycle - ATV, specialty machinery, hydraulic brakes, drive train, zip line brakes, Quads, construction machinery, suspensions, steering, accidents, off road vehicle, side by side, off road tires, theme park ride, utility vehicle, on road vehicle, recreational vehicle, vehicle dynamics, themed show equipment
...Licensed P.E. in CA and NV Extensive experience with: ATV and side by side suspension design, calibration and testing. ATV and side by side steering and brake system and component design and testing. ATV and side by side drive train design and testing. On road truck suspension design. Specialty equipment design. Theme Park Ride design experience Theme Park Ride 3rd party review experience with significant finds. Theme Park Show Equipment design. Zip Line Brake system design. Extensive knowledge of materials, finishes, manufacturing methods. Experienced in stress analysis and rigid body dynamics analysis. Experienced in structural carbon fiber design and analysis.

Frank S Will, PhD Ino8

Los Gatos , California
Automotive, Motorcycle - Engine, Motor, Defect, Damage, Failure, Exhaust, Emission, Carbon, Monoxide, NOx, Test, Measure, Defeat Device, Computer, Control, Software, Calibration, Tuning, Performance, Power, Fuel, Economy, Combustion, Leak, Heat, Burn, Fire, Gas, Diesel, Motorcycle, Autocycle, Bike, Bicycle, Battery, Lemon
...He has conducted extensive research in the reduction of emissions and improvement of vehicle efficiency, with applications to automotive control systems, and semi-active suspension systems. He is a Fellow of SAE-A, and a recipient of multiple international awards, and holds a PhD in Mechanical Engineering from Deakin University, Australia, an MBA from Henley Management College, UK, the MSc equivalent from University of Siegen, Germany, and a Graduate Certificate in Higher Education from Deakin University. Since around 50 years he has been involved with motorcycles, for over 20 years he competed in professional motorcycle racing, starting with trials over grass track to moto cross, super cross and Enduro, so he is also very experienced with two-wheeler specific accidents and injuries.

Wesley D Hoy, PE Hoy and Miller Consulting, LLC

Gainesville, Florida
Automotive, Accident Reconstruction - Vehicle fire,Heavy-duty truck,rechargeable cells,Codes and standards, motorcycles,crash reconstruction,tires, brakes,motor home,vehicle preventative maintenance and inspection,vehicle recall, black box download,seat belts,HVAC
...Hoy has an extensive practical background in automotive preventive maintenance and repair, tires, brakes, steering and suspension, vehicle electronics, seat belts, black box download and interpretation, and vehicle fires. Additionally, Mr. Hoy has an extensive background in vehicle crash reconstruction, including pedestrians, bicycles, trucks, motorcycles and automobiles, and has consulted on hundreds of cases. A partial list of specific cases that Mr. Hoy has consulted upon include: • Tire failure • Ball joint failure • Tie rod failure • Antilock brakes • Catastrophic engine failure • Liftgate incident • Vehicle electrical fire • Hot plate ignition • Vehicle recall • Line of sight crash reconstruction • Vehicle lighting analysis • Seat belt analysis • Black box download and analysis • Low-speed crash reconstruction • Motorcycle v truck • Truck under ride • Transit bus • Carbon Monoxide poisoning

Howie Knoff, Ph.D. Project ACHIEVE Educational Solutions

Fort Myers, Florida
Education & Schools, Psychology - IDEA, LRE, FAPE, Special Education Disputes, Mental Health Misdiagnoses, ADA 504 Accommodations, Disability Rights, Disproportionality, Racial Discrimination, Emotionally Disturbed or Autistic Students, Seclusion & Restraints, School Safety & Violence, Bullying & Harassment, Discipline & Suspensions
A Licensed Psychologist (FL) and Nationally Certified School Psychologist, Dr. Howie Knoff has been an Expert Witness in innumerable Federal and State Court cases, as well as Due Process Hearings and mediations nationwide since 1993. These cases have focused on IDEA and Special Education Procedures, School Psychology Assessment/Intervention Disputes, Psychological Misdiagnoses and Mental Health Services, 504 Accommodations and Disability Rights, Disproportionality and Racial Discrimination/Equity, Emotionally Disturbed and Autistic Students, Seclusion and Restraints, Educational Malpractice, School Safety and Violence, Social-Emotional Learning and Positive Behavioral Supports, Multi-Tiered Systems of Support, Bullying and Harassment, Discipline and Corporal Punishment, IEP Disputes and Due Process Hearings, FAPE and LRE, Dispute Resolution and Mediation, Learning Disabilities and ADHD, Stress and Trauma. Howie has been the Expert Witness for (a) two State Attorney Generals (one...

Adam K Aleksander, PhD, PE, CSP Aleksander & Associates P.A.

Boise, Idaho
Human Factors, Products Liability - Warnings, Labels, Reconstruction, Visibility, Failure Analysis, Forensic Engineering, Defects, Photogrammetry, Metallurgy, Human Factors, Ergonomics, Construction, OSHA, Safety Engineering, Product Liability, Equipment Failures, Industrial Accidents, Power Utility Accidents, Insurance Claims
Specific Cases: Go cart nip point fatality, washing machine amputation, amputations in punch presses, hydro-pneumatic tank explosion, agricultural truck amputation, airport conveyors, biscuit cutter, amusement rides, water-jet fatality, slips & trips, lead rope snap, exercise machine failures and injuries, document burn injuries, folding chair collapse, concrete anchor system, nail gun injury, prosthesis bolt failure, steam iron electrocution, pool light burn, design of warnings and instructions, ATV rollover, automotive failures and crash related phenomena, measurement of ECDs (TASER®) Farm equipment, failed engines, mining conveyors, power plant systems, belt conveyors, potato processing system, sewer line, tire shredder processing analysis, failed brake die, failed conveyor bearing, RV axle repair failure, trailer suspension system failure, trailer separation, dump truck telescoping cylinder failure, brake system, headlight filament analysis, service station gasoline tank leak, bicycle...

Steven S Paul, CVA, ASE, NRVIA II TDT Vehicle Inspection Services Inc

Carlyle, Illinois
Automotive, Appraisal & Valuation - Appraisal & Valuation Automotive, Automotive Dealer Practices, Automotive Economics, Automotive Leasing, Automotive Repair & Service, Lemon Law, Machinery & Equipment Appraisal & Valuation, Vehicles Appraisal & Valuation
...Paul is ASE Master Certified in both Automotive and Medium / HD Trucks including engines performance, electrical, driveline, brakes, steering and suspension as well as safety related systems. He has inspected over 2,500 vehicles since 2005 ranging from Model T Fords to 2015 BMW & Mercedes. He is qualified to inspect HD Semi Trucks and Construction Equipment as well as RV, Motorhomes and Campers. Mr. Paul also has inspection experience with Exotic & Luxury High End Cars as well as Boats and Watercraft. Automobile, medium duty and heavy-duty truck repair and inspection as well as heavy equipment such as construction and agriculture equipment. Litigation Support - Mr. Paul is a Certified Vehicle Appraiser and can provide opinions of value based on fair market value, diminished value and replacement values in accordance with USPAP. He has been court qualified as an expert vehicle inspector in multiple states as well as federal court. Mr....

Elizabeth A Moore, MD, FACOG Hybrid Health Logistics / MooreExperts

Brewster, Massachusetts
Obstetrics & Gynecology, Hospitalist - Surgical Complications, Fetal Demise, Policy, Procedure, Maternal Morbidity, Mortality, OB/GYN, Labor, Delivery, Hospitalist, Birth Injury, Device Failure, Standard of Care, Endometriosis, Ablation, Hormone Therapy, Cesarean, Hysterectomy, Ectopic, Pelvic Mass, Delayed Diagnosis, Medical Board, VBAC
...Inpatient surgical affiliations included first surgical assist/co-surgeon to a high-volume women’s cancer center in Nevada, specializing in gynecologic oncology, pelvic suspension, and urogynecology (300+ cases in practice history). Successful professional experience in the navigation of OBGYN medicolegal situations. Accomplished in detailed deposition work and communication strategies. Have reported and testified on behalf of both plaintiffs and defendants, including governmental agencies and insurance companies. Deposition and trial testimony experience in both live and virtual settings. Course author, coach and mentor for MooreExperts, instructing and coaching OBGYN practitioners in the development of their skills as medical consultants and medical expert witnesses. Advocated for over 700 physicians in continuity of care by meeting and working with President George Bush on the Keep Our Doctors in Nevada program.

Chris Scott, PhD Material Answers LLC

Weston, Massachusetts
Chemical Engineering, Failure Analysis - polymer, plastic, rubber, coating, materials, material science, material engineering, thermoplastic, thermoset, composite, design, manufacturing, adhesive, ink, automotive, medical device, aerospace, packaging, accident, defect
...Systems investigated include plastics, composites, coatings, paints, adhesives, rubbers, fibers, suspensions, emulsions, and pastes. In particular, Dr. Scott has published extensively on the topics of polymer processing and structure relationships, compounding and mixing in multiphase polymer systems, and structure and morphology development during polymer processing. He is the inventor on 11 U.S. patents, author of more than 30 articles in peer reviewed journals, author of 40 conference proceedings, and has presented more than 50 seminars to industry and government organizations. Dr. Scott has conducted failure analysis investigations and developed product designs in a broad range of applications, including: automotive components, consumer products, medical devices, aerospace, pharmaceuticals, coatings, prints, construction materials, and packaging. Numerous material systems have been assessed relative to long term stability, aging, degradation, and chemistry....

Roger H Hanson, CSHO Critical Construction Consultation

La Porte, Texas
OSHA, Slip Trip & Fall - Fall Prevention , Material Handling , Electrical Safety, Signs Signals Barricades, Ladders, Stairways , Working at Heights, Hand Tools, Steel Erection, Excavation, General Safety, Welding, Scaffolding, Confined Space, PPE, HazMat, Aerial Man Lifts, Respirators, Fire Prevention, Cranes and Rigging
...Train the Trainer OSHA CFR 1926 Train the Trainer industrial and Extendable-boom Forklifts, Aerial Manlifts, Structural and Aerial Suspension Scaffolding. Served in the USAF 3 years 3 months and 15 days as a C130 Aircraft Electrical Tech. Received an Honorable Discharge. Expert Witness Construction Fall Protection Cause 37360 223 District Court Gray County Settled prior to trial. Oilfield Crane-Rigging-Signaling Cause B192-633 District Court Jefferson County Settled prior to trial. Construction Motorized Manlift Cause 67795-A Smith County Settled prior to trial. Constuction Concrete Pumping Cause DC-17-10426 284th Judicial District Court Settled prior to trial. Deposition Crane-Rigging-Signaling Cause 11-16330 116th Judicial District Settled prior to trial.

Kathleen L Jackson, R.Ph., Ph.D. (H.C.), FIACP Jackson Audit and Compliance

Alvin, Texas
Pharmacist, Pharmaceutical Regulation - USP <797> <795> <800>, Sterile and non-sterile compounding, FDA 503(a) and (b), State Inspections, Accreditation, Compliance, Critical Point Training, NABP, PCAB, Inspections, FDA Drug Compliance Expert
...She has performed inspections and prepared reports to Boards of Pharmacy related to license suspensions/probation orders. Kathleen has co-authored two articles on Root Cause Analysis in the IJPC (International Journal of Pharmaceutical Compounding). She has also authored several articles in the Texas Pharmacy magazine and the US Pharmacist journal related to health conditions.

Curtis M Beloy, PE 4moto Engineers LLC

Madison, Wisconsin
Accident Reconstruction, Products Liability - motorcycle, EDR, ATV, UTV, SxS, surveillance video, dashcam, telematics, snowmobile, watercraft, PWC, skateboard, scooter, off-road, racetrack, OHV, OHRV, motocross, powersports, ABS, ESC, failure, drivetrain, throttle, brakes, engine, rollover, BMX, bicycle, Harley, sportbike, dirtbike, safety
...He has evaluated large-scale recalls and crashes involving vehicle stability, controls, electronic aids, suspension, and overall vehicle design. He has consulted manufacturers on product design and the US Border Patrol on ATV safety. He is a lifelong powersports enthusiast and enjoys applying insights gained from off-road racing, performance vehicle tuning, and his first-hand experiences of vehicle crash behavior. Mr. Beloy graduated with honors from Minnesota State University with Bachelor's and Master's Degrees in Mechanical Engineering. He is a licensed Professional Engineer and a board-certified Diplomate in Forensic Engineering (DFE). He is an active member of several industry societies, where he has published research, presented at conferences, and keeps current with industry practices. He is Principal Engineer and Co-owner at 4Moto Engineers LLC. He provides consulting services nationwide.